Tree: f25a70a674

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'f25a70a674'

${ noResults }

Commit Graph

66 Commits (f25a70a674ef3fc41292c22c23c9cefdde782c5a)

Author	SHA1	Message	Date
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering ... - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	ad934b4911	icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) ... - include icm20948 on most boards by default - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default ... - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc ... - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
Daniel Agar	a2442ffb48	board: enable UAVCAN sensors by default on F7/H7	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) ... - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Daniel Agar	763c3b8fda	boards: start enabling multi-EKF by default on F7/H7	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	7c07ce9649	mro_x21-777: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Tanja Baumann	b5ebdb8e41	add system command to get and set system time ... * add system_time command for all boards	5 years ago
David Sidrane	4f5c88fc89	mro_x21-777: Updates for NuttX 9.1.0+ External schedule_note	5 years ago
David Sidrane	c9a323ebcc	mro_x21-777 Updates for NuttX 9.1.0- ... mro_x21-777: defconfig MMCSD enable multiblock	5 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 ... - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	fbc8e1b09e	boards: mRo X2.1-777 fixes ... - ardupilot bootloader compatibility (first 3 sectors) - clock tree fixes - start mavlink - start mpu9250 magnetometer (only onboard mag) - fixes https://github.com/PX4/Firmware/issues/15466	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago
Daniel Agar	6f6efd60b7	boards: centralize optional external I2C sensor start ... - configured with new parameter SENS_EXT_I2C_PRB	5 years ago
Daniel Agar	5e7d2e830d	boards: delete old board.h boilerplate	5 years ago
Daniel Agar	746a8f5cf9	commander: reboot/shutdown usability fixes ... - always check with state machine before reboot/shutdown - respect BOARD_HAS_POWER_CONTROL (shutdown from command, low battery, power button) - px4_shutdown_request add optional delay and always execute from HPWORK - px4_shutdown_request split out px4_reboot_request	5 years ago
Daniel Agar	28d2aca699	boards: include all procfs entries on boards that aren't flash constrained	5 years ago
Daniel Agar	8d0c92003a	boards: remove all CONFIG_NXFONTS_DISABLE*	5 years ago
Daniel Agar	06478d9997	delete obsolete SENSORIOCSPOLLRATE/SENSORIOCRESET and systemcmds/config	5 years ago
mcsauder	6548fde024	Whitespace cleanup to quiet new blank line at EOF git hook.	5 years ago
Daniel Agar	66eacd24bc	px4_fmu-v5_stackcheck: update stack sizes and add to Jenkins ... - increase stack sizes to run cleanly under stackcheck - this is likely overkill for most boards, but using stackcheck to set our minimum ensures we have a very safe margin on regular builds and it's something we can currently afford - remove holybro_durandal-v1_stackcheck from test rack (there's only one unit)	5 years ago
Daniel Agar	a89bba470a	boards: STM32F76xxx/STM32F77xxx linker add ITCM RAM and .ramfuncs handling ... - this doesn't currently change anything, but gets us ready to start experimenting with using the small amount of instruction tightly memory on STM32F7 - the .ramfuncs section works with NuttX CONFIG_ARCH_RAMFUNCS	5 years ago
Daniel Agar	7aa7f0ed95	switch remaining boards to new InvenSense IMU drivers	5 years ago
Daniel Agar	ad559a66a1	examples: add simple work_item example module	5 years ago
Daniel Agar	40b1043e12	NuttX boards minor lpwork and init stack increases	5 years ago
Daniel Agar	15332a7e56	boards: reduce CONFIG_NFILE_DESCRIPTORS 20 -> 15	5 years ago
Daniel Agar	ca81175b07	rename drivers/px4fmu -> drivers/pwm_out ... - split out header	5 years ago
Daniel Agar	44bec269b0	boards: update all NuttX configs CONFIG_NSH_MAXARGUMENTS 12 -> 15	5 years ago
Daniel Agar	f5fe50f839	invensense/icm20608g driver minor improvements ... - interupt pin set active low and latch - relax retry timeout if configure failed - improve configured empty rate (sample rate) rounding - fix RegisterCheck - check FIFO count as part of full transfer and reset or adjust timing if necessary - rename DRV_IMU_DEVTYPE_ICM20608 -> DRV_IMU_DEVTYPE_ICM20608G	5 years ago
Beat Küng	b156fe5787	boards: remove deprecated SPI + I2C defines from board_config.h ... chip-selects are deselected in stm32_spiinitialize()	5 years ago
Beat Küng	7626be0485	refactor mpu9250: use driver base class	5 years ago
Daniel Agar	8738c26426	boards: enable NuttX SPI DMA buffers ... - update to NuttX with stm32f4 and stm32f7 SPI DMA internal buffers - remove explicit DMA buffer allocations from new IMU drivers - restore original BOARD_DMA_ALLOC_POOL_SIZE - decrease SPI DMA thresholds based on fmu-v2/v3/v4/v5 bench testing	5 years ago
Beat Küng	8ebde51648	refactor hmc5883: use driver base class ... Removes the calibration on startup, as these values were overwritten by the system calibration values anyway. So the only difference is that if all calibration scales were equal to 1, the driver startup would have failed.	5 years ago