6e63985a10
intel_aerofc-v1: Inital commit NuttX 7.27+
6 years ago
9294766658
gumstix_aerocore2: Inital commit NuttX 7.27+
6 years ago
48f9d3f3d9
bitcraze_crazyflie: Inital commit NuttX 7.27+
6 years ago
47e16e75f2
av_x-v1: Inital commit NuttX 7.27+
6 years ago
6872c6900e
auav_x21: Inital commit NuttX 7.27+
6 years ago
34aabed5e5
auav_esc35-v1: Inital commit NuttX 7.27+
6 years ago
e7f8042e90
atmel_same70xplained: Inital commit NuttX 7.27+
6 years ago
55559bc72c
airmind_mindpx-v2: Inital commit NuttX 7.27+
6 years ago
2d7effa342
px4_io-v2: Inital commit NuttX 7.27+
6 years ago
517add3c8c
auav_esc31-v1:Fix build
6 years ago
8f308efa88
upstram NuttX CONFIG_EXAMPLES_NSH_CXXINITIALIZE->CONFIG_SYSTEM_NSH_CXXINITIALIZE
6 years ago
5c23099eed
board_button_irq: API change in upstream
6 years ago
e358486ef7
aerofc-v1:Scope CRASHDUMP_RESET_ONLY to BOARD_CRASHDUMP_RESET_ONLY
6 years ago
f2208171d5
Add callout for CONFIG_BOARDCTL_FINALINIT
6 years ago
2ffb49b734
delete px4_includes.h header and update boards/ to use syslog
6 years ago
67e5986c9b
delete obsolete examples/subscriber
6 years ago
693ee4808a
delete obsolete examples/publisher
6 years ago
320d2e9383
create PX4 platform layer initialization helper ( #11269 )
...
- starts requirements for PX4 modules (hrt, param, etc)
6 years ago
65fe3ce5d3
px4_fmu-v2_default temporarily disable sf0x
...
- can be reenabled after #11256 is merged
6 years ago
d4c87132e4
board raspi (vanilla): simply added two lines to pass the compile
6 years ago
c319ea7189
boards sync fmu-v2 sensors start with fmu-v3
6 years ago
fef65bf5c8
ROMFS split rc.board into defaults, sensors, and extras
6 years ago
f6175605cd
px4_fmu-v4 init: Do not start mavlink stream on ttyS0 for the TealOne airframe
...
* We have RAM problems and can't afford 4 mavlink instances. This only adds logic the rc.board for the fmu-v4 that only has an effect for SYS_AUTOSTART = 4250 (TealOne airframe).
6 years ago
280a60c86f
Fixed unreliable ICM20948 detection.
...
Fixed ICM20948 magnetometer only option.
Specified bus for internal mpu9250 on Pixhawk 2.1 to avoid premature detection of
other device.
6 years ago
5e53f73ad8
fmu-v5:Add Alias CUAV V5 REV:5, VER:1
6 years ago
37e71a4d9d
sitl: rtps.cmake: add tone_alarm_sim and ENABLE_LOCKSTEP_SCHEDULER
6 years ago
1b8c2c82d5
px4flow start in rc.sensors instead of per board ( #11123 )
...
- fixes #11009
6 years ago
169722c46f
omnibus rc.board: add transition support to load params from file to FLASH
6 years ago
2698625be9
omnibus: switch to flash-based params
...
Not all boards have an SD card.
This is a *breaking* change and requires a bootloader change.
6 years ago
3e452e2e72
boards: tone_alarm_sim was missing for test board
6 years ago
547dd8511b
platforms: use define for lockstep scheduler
...
Instead of using the define __PX4_POSIX_SITL it makes more sense to have
a define just to determine if the lockstep scheduler should be used.
6 years ago
4efe4b0d15
platforms: reorg after rebase on new board config
...
The new board config changed everything, so I needed to move the
lockstep_scheduler repo.
6 years ago
8cbe26c6f6
platforms: fix linking issues for NuttX build
6 years ago
5b9dea5604
Replacing usleep with px4_usleep
...
This is a step towards isolating time from the system.
6 years ago
fce35ba9d2
fmu-v2: remove orbit support to save flash
6 years ago
1c90b917ea
Fix px4_fmu-v2/v3 serial port mapping
6 years ago
53bc357cda
nxphlite-v3:SDHC setting is for EMI issue with GPS and FCC ( #11029 )
...
This updating of the driver setting is for EMI issue with GPS and FCC.
With this setting the clock is sinusoidal
N.B. sd_bench fails on SanDISK HC, but Passes SanDISK **HC1** and
Kingston cards.
****Use HC1 or Kingston cards!***
Testing done on SanDISK HC all failed sd_bench with Drive/Slew other
than default and _PIN_OUTPUT_FAST|_PIN_OUTPUT_HIGHDRIVE
_PIN_OUTPUT_FAST|_PIN_OUTPUT_HIGHDRIVE Square noisy, pass SanDISK HC
_PIN_OUTPUT_FAST|_PIN_OUTPUT_LOWDRIVE Square noisy, pass SanDISK HC
_PIN_OUTPUT_HIGHDRIVE|_PIN_OUTPUT_SLOW sinusoidal fail SanDISK HC, pass SanDISK HC1
_PIN_OUTPUT_LOWDRIVE |_PIN_OUTPUT_SLOW sinusoidal fail SanDISK HC, pass SanDISK HC1
_PIN_OUTPUT_SLOW sinusoidal fail SanDISK HC, pass SanDISK HC1
6 years ago
c1d50d35d3
Move common shmem parameter declarations to shmem.h.
6 years ago
859b242cb8
Fix some dynamic linking errors.
...
_Stof, bsearch, param_find_changed
6 years ago
606bff2634
Fix paths in snapdragon upload code.
6 years ago
311c0941c9
Teal One airframe improvements for full support ( #10860 )
...
* added a parameter for enabled the smart battery
* start tel1 and tel2 at 921600 and max rate
* turned up the max tx rate on mavlink streams for telem1 and telem2
* turned off mavlink stream for tel1 in 4250_teal. This is connected to TX1 FTDI UART and has issues.
* moved check to 4250 board ID to start mpu9250s for Teal airframe into fmuv4 rc.board.
6 years ago
1f8c0e79e8
cmake toolchains force cache cpu flags and don't append
...
- these flags were accumlating on top of each other anytime cmake had to reconfigure
6 years ago
dbee6380ee
cmake move custom upload helpers to boards/
6 years ago
5ba56c8c2c
fmu-v5 timer_config.c fix code style
6 years ago
8622fa4aac
move pca8574 driver to lights
6 years ago
75b2053243
move uavcan from modules to drivers
6 years ago
bbab66d974
move vmount to modules (it's not a driver)
6 years ago
9d42480f4e
drivers create lights category (directory)
6 years ago
f6a4616501
move ocpoc_adc driver to board directory
6 years ago
766c33799d
move all navio2 drivers to emlid navio2 board directory
6 years ago
David Sidrane
Daniel Agar
SalimTerryLi
Jacob Dahl
Florian Olbrich
TSC21
Beat Küng
Julian Oes
Matthias Grob
斯东Stone
Kārlis Seņko