543a057f80
fmu-v4: add dshot timer config
5 years ago
315141873e
NuttX boards reduce CONFIG_MAX_TASKS 64 -> 32 (default)
5 years ago
0955fd2d58
NuttX boards reduce CONFIG_NFILE_DESCRIPTORS 54 -> 20
6 years ago
5421ef5535
NuttX increase HPWORK and LPWORK stack by 256 bytes
6 years ago
9d701a077d
NuttX reduce stack for interrupts, HPWORK, LPWORK
6 years ago
dc10a68539
NuttX and apps update 7.29
6 years ago
bef7a9ba8e
NuttX boards increase task limit 32 -> 64 ( #12230 )
6 years ago
fcec3b3efc
px4_fmu-v4: increase uart buffer sizes for vision algorithms ( #12199 )
6 years ago
41ff6c60ba
px4_fmu-v4 nsh compress defconfig
6 years ago
edd9f91a19
board:Set larger stack margin
6 years ago
6f9a9b3d2c
px4_fmu-v4: add runtime external SPI4 detection to support pmw3901 ( #11301 )
...
* The build is built with SPI4. At run time the signal GPIO_8266_GPIO2 it tested. If it is low the SPI4 is configured. If it is high SPI4 is not configured.
* board_common: Add Notion of Board has bus manifest
6 years ago
938f1453fe
px4_fmu-v4: Inital commit NuttX 7.27+
6 years ago
abb3817d31
boards new split VENDOR_MODEL naming convention
6 years ago
f692ad04d0
boards organization
6 years ago
dfc390bbe0
px4fmu-v4 nsh: Disable ARCH_IRQPRIO & ARCH_HIPRI_INTERRUP
...
This insures the common exception handler will not be
re-entered. The handler does not support nested interrupts
and the interrupt stack pointer and context will be overwritten
resulting in hard to debug hardfaults.
If all the priorities are equal the NVIC prevents the
preemption. The startup code defaults all the priorities
to the same value 128.
This change safeguards in 2 ways 1) By disabling
CONFIG_ ARCH_IRQPRIO: up_prioritize_irq cannot be called.
This will insure that all HW interrupts are at the same
priority.
2) By disabling CONFIG_ARCH_HIPRI_INTERRUP, the common
exception will disable any interrupts during interrupt
processing.
7 years ago
ac298664c7
nuttx-configs increase idle thread stack size to 750 bytes
7 years ago
02c4ec9b2a
move nuttx-configs to platforms/nuttx
7 years ago
f170b28fbc
nuttx-configs remove cu and mount example
7 years ago
68679a3e8e
px4fmu-v4 nsh:Optimize memset for speed
8 years ago
bdc2397238
px4fmu-v4:nsh Refresh config
8 years ago
8cbd7a9290
px4fmu-v4 nsh: Upstream NuttX defconfig changes
...
was:CONFIG_STM32_STM32F40XX is:CONFIG_STM32_STM32F4XXX
8 years ago
4692b66f49
px4fmu-v4 nsh: Upstream NuttX defconfig changes
...
was:CONFIG_ARM_TOOLCHAIN_IAR is:CONFIG_ARCH_TOOLCHAIN_IAR
was:CONFIG_ARM_TOOLCHAIN_GNU is:CONFIG_ARCH_TOOLCHAIN_GNU
was:CONFIG_MUTEX_TYPES is:CONFIG_PTHREAD_MUTEX_TYPES
8 years ago
3a4013440a
px4fmu-v4 nsh Update for upstream NuttX removed CONFIG_LIBC_ARCH_BZERO
8 years ago
63b9c03e53
px4fmu-v4 Refreshed nuttx SDIO changes for 7.19+
8 years ago
d3e9a54b4f
px4fmu-v4 nsh Refreshed nuttx config for 7.19+
8 years ago
83643a719a
nuttx config: increase CONFIG_NFILE_DESCRIPTORS from 53 to 54
...
This is needed when logger is logging to file and ulog streaming gets
activated.
8 years ago
6f5499af7d
FMUv4: Schedule work queue with higher priority
8 years ago
235a789a47
FMUv4 configs: ensure there is enough TX buffer space
8 years ago
1be089cf0c
BBSRAM: add another partition and store the last ulog path
8 years ago
49b1bd597e
FMUv4 config: Ensure enough stack space in user main function
...
There was enough margin with 200 bytes, but this change widens that to the default of 300.
;
8 years ago
4a36a806de
px4fmu-v4 enable CONFIG_DEBUG_ALERT
8 years ago
9f9477e156
px4fmu-v4 nuttx config: reduce CONFIG_CDCACM_TXBUFSIZE to 2000
...
Log file download via Mavlink is the one that needs the most bandwidth.
It needs typically around 200B TX buffer, and spikes at around 1500B every
10sec, with an average download speed of 230KB/s.
8 years ago
1f520f15a3
px4fmu-v4 NuttX defconfig: lower CONFIG_DEV_PIPE_SIZE to 70
...
This saves almost 2kb of RAM when using the mavlink shell. 70 matches the
size of the mavlink message. Since the pipe is blocking, a process writing
a lot of data will just wait, data will not be dropped.
The mavlink shell is the only process creating a pipe.
8 years ago
1d93b1bce3
nuttx configs: increase CONFIG_NFILE_DESCRIPTORS from 51 to 53
...
this is needed due to the additional topics logged with the logger
8 years ago
eb72b49507
px4fmu-v4 use board common reset interface
8 years ago
88a4b5ba07
FMUv4: Ensure enough IRQ stack
8 years ago
17633c0714
Changes to px4fmu-v4 for upstream Nuttx and hardfault logging
8 years ago
302719527a
nuttx defconfig: increase nr of file descriptors, due to mavlink shell
9 years ago
fb1fd205bd
MAVLink app needs more FDs
9 years ago
d35814ed99
nuttx px4fmu-v4 config: increase CONFIG_NFILE_DESCRIPTORS to 52
...
necessary for mavlink receiver. It had the following output:
mavlink_rcv_if0: node_open as advertiser failed.
9 years ago
3829871612
Removed unused NXFFS buys back 5792 bytes of FLASH
9 years ago
9d35b05889
FMUv4: Safe RAM
9 years ago
45ea58d451
FMUv4: Increase USB and UART buffers to speed up log transfers
9 years ago
b2aa25448b
Pixracer: Boost buffer and FTP transfer capability
9 years ago
bbe69fbe45
Fix FMUv4 USB PID
9 years ago
0e48b58d7d
Support Mavlink on USART2 (ESP8266)
...
Needed bigger buffers
9 years ago
35d387792c
Fix product string for FMUv4
9 years ago
6cc1bb7ec8
Enable RX DMA for UART6
9 years ago
a3eeafebeb
Enable UART6 and enable S.BUS. Tested to work.
9 years ago
b137a24f30
Free timer 3
9 years ago
Igor Mišić
Daniel Agar
Tanja Baumann
David Sidrane
Beat Küng
Lorenz Meier
Lorenz Meier