The bulk of this change was tightly coupled and needed to be deleted in one pass. Some of the smaller changes were things that broke as a result of the initial purge and subsequently fixed by further eradicating unnecessary platform differences. Finally, I deleted any dead code I came across in the related files I touched while going through everything.
- DriverFramework (src/lib/DriverFramework submodule) completely removed
- added dspal submodule in qurt platform (was brought in via DriverFramework)
- all df wrapper drivers removed
- all boards using df wrapper drivers updated to use in tree equivalents
- unused empty arch/board.h on posix and qurt removed
- unused IOCTLs removed (pub block, priv, etc)
- Integrator delete methods only used from df wrapper drivers
- commander: sensor calibration use "NuttX version" everywhere for now
- sensors: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- battery_status: update to px4_{open, read, close} instead of DevMgr wrapper (adc open for analog differential pressure)
- cdev cleanup conflicting typedefs and names with actual OS (pollevent_t, etc)
- load_mon and top remove from linux boards (unused)
- delete unused PX4_MAIN_FUNCTION
- delete unused getreg32 macro
- delete unused SIOCDEVPRIVATE define
- named each platform tasks consistently
- posix list_devices and list_topics removed (list_files now shows all virtual files)
- deprecate DriverFramework bmp280 driver (df_bmp280_wrapper)
- update beaglebone blue and snapdragon flight eagle boards to use in tree bmp280
- update posix (really just linux) and qurt I2C wrappers
- tested on beaglebone blue
- just use external mag, if they run together the sensor_mag_0 topic gets
corrupted even though they publish on different instances
- added sleep at two places, they resolve weird boot problems like params
not being read correctly...
Signed-off-by: Roman <bapstroman@gmail.com>
In order to capture everything for replay logs, start sdlog2 at the very
beginning. Also, wait with starting the sensors for a second, to make
sure sdlog2 has started by then.
We need to start the external mag before we start the internal mag on
the MPU9250 because the ekf2 does not support voting for the sensor with
the highest priority (or failures) yet, so it will just subscribe to
whatever is at 0.
The name uart_esc was initially taken by Qualcomm's UART ESC driver but
then got changed into the current mavlink ESC/RC helper. Since the
uart_esc is still around, we should prevent the names clashing.
* Qflight: add intersil sensor driver
* df_isl_wrapper: change driver lib name to isl
* posix-config: add df_isl_wrapper start command to eagle startup
* isl_wrapper: cleanup isl wrapper
* isl: remove unused option -R
* isl: change the driver name to isl29501
* DriverFramework: updated submodule again
This is to get the latest `make fix-style` changes.
* df_isl29501_wrapper: rename wrapper all the way
Daniel Agar
Beat Küng
Roman
ChristophTobler
ChristophTobler
ChristophTobler
Dennis Mannhart
Julian Oes
Lorenz Meier
Nicolas de Palezieux
tumbili