px4_autopilot

Commit Graph

Author	SHA1	Message	Date
Daniel Agar	89b920333b	boards: px4_fmu-v2_multicopter disable gyro_calibration module to save flash	4 years ago
Beat Küng	0e1f3a2d62	px4_add_board: infer VENDOR, MODEL & LABEL from cmake file name	4 years ago
David Sidrane	6379f2b032	px4_fmu-v2:Use NO_HELP option to save flash	4 years ago
Daniel Agar	b33fdf704b	boards: px4 fmu-v2/v3 swap external SPI chip select order - fixes https://github.com/PX4/PX4-Autopilot/issues/17858	4 years ago
Daniel Agar	774ad80ba0	systemcmds/tests: split out microbenchmarks and remove obsolete tests - reorganize Jenkins HIL tests	4 years ago
Daniel Agar	12ad7b17ce	Makefile: add all_variants_@ helper target and consolidate github actions builds	4 years ago
Beat Küng	50b0f0e392	iridiumsbd: disable module until everything is fixed There seem to be more issues in combination with MAVLink.	4 years ago
David Sidrane	05bdef867d	Track NuttX syslog change	4 years ago
David Sidrane	62fd132047	boards:Use inttypes nxp_ucans32k146:Fix constant spracing_h7extreme:Use inttypes	4 years ago
echoG	6bc09138c1	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
Daniel Agar	5831494164	boards: px4_fmu-v2_default disable gyro_calibration module to save flash - this doesn't impact regular gyro calibration	4 years ago
Daniel Agar	c3884b5bc1	fake_imu (formally fake_gyro) updates for testing gyro filtering - fake_imu now publishes sine sweeps over 10 seconds - accel is also published so that fake IMU can be selected when the only option	4 years ago
David Sidrane	b1e0702657	px4_fmuv2:Save Flash CONFIG_LIBC_STRERROR=n	4 years ago
Daniel Agar	58b40fbbb9	boards: move testing to dedicated test variants	4 years ago
Daniel Agar	6874e9fba0	boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default - closes https://github.com/PX4/PX4-Autopilot/issues/17062	4 years ago
Daniel Agar	3d667b1675	delete unused drivers/lights/blinkm	4 years ago
Daniel Agar	631d1647d3	boards: minimize unnecessary differences in default variants	4 years ago
Daniel Agar	2257c3767e	simple gyro auto calibration module	4 years ago
Daniel Agar	f8eaa6e46b	ROMFS handle bl_update generically - include all available legacy bootloaders	4 years ago
Daniel Agar	4d288512b5	add board architecture specific init defaults	4 years ago
Daniel Agar	19de1e57e3	gyro_fft promote to modules and include on all boards	4 years ago
Daniel Agar	c9a2d0ed34	IMU_GYRO_RATEMAX set system default to 400 Hz - MC default is still 800 Hz	4 years ago
Beat Küng	7e33d03470	drivers: remove tap_esc - it's not used anymore - it would need a refactoring to use mixer_module	4 years ago
Daniel Agar	11ad41f7cb	delete old imu/mpu6000 driver	4 years ago
Daniel Agar	cd7713eba2	boards: delete unused variants	4 years ago
Daniel Agar	414f9f81d9	move fake GPS to standalone module	4 years ago
Julian Oes	20bc924668	boards: disable vmount for fmu-v2	4 years ago
Daniel Agar	ab0d0fd0be	uORB move to PX4 platform layer	4 years ago
Daniel Agar	44df0fb7a2	Analog Devices ADIS16448 rewrite - new IMU driver structure with state machine (no sleeps in bus thread) - verify all configured registers and trigger reset on failure - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage - don't use CRC-16 on burst transfers except for verified lots	4 years ago
Daniel Agar	fb2a199621	delete unmaintaned mkblctrl driver	4 years ago
Daniel Agar	a257120e8d	boards: use new param default mechanism	4 years ago
Daniel Agar	8f0918a16b	boards: remove unused linker __param section	4 years ago
David Sidrane	3b25790b06	px4_fmu-v2:Make room	4 years ago
Daniel Agar	78dff6adcb	boards: add CONSTRAINED_MEMORY build option - currently the main change is that it reduces the max number of ORB multi instances to 4, but usage will be expanded as needed - limits number of EKF2 multi instances to 2. - enabled on all cortex m4 boards	4 years ago
Daniel Agar	318c7e83b3	support up to PWM 14 - generate PWM_MAIN 1-14 - generate PWM_AUX 1-8 - generate PWM_EXTRA 1-8 - px4io and pwm_out directly read configuration parameters - only available and active physical outputs are actually shown for configuration - overall saves flash despite adding many new parameters	4 years ago
Daniel Agar	1ec10bfcc6	boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573 ) - this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause	4 years ago
Daniel Agar	cb74cb8692	boards: enable CONFIG_ARMV7M_LAZYFPU everywhere	4 years ago
Matthias Grob	7545249215	Add flight_mode_manager to all targets with mc_pos_control	4 years ago
David Sidrane	22bc176885	Added mft for queries	4 years ago
David Sidrane	313b3edc04	px4_fmu-v2: Use px4_platform_configure	4 years ago
Daniel Agar	c60743b306	boards: NuttX increase file name max 32 -> 40	4 years ago
Daniel Agar	81aa8a914f	boards: px4_fmu-v2 disable ver command line to save flash	4 years ago
Daniel Agar	233949a377	NuttX upgrade to 10.0.0+ defconfig changes	4 years ago
Beat Küng	d2644a3bf7	distance_sensor/sf0x: rename to lightware_laser_serial	4 years ago
David Sidrane	42b466dc45	px4_fmu-v2: Updates for NuttX 9.1.0+ External schedule_note	4 years ago
David Sidrane	77ce7b2457	px4_fmu-v2 Updates for NuttX 9.1.0- px4_fmu-v2: defconfig MMCSD enable multiblock	4 years ago
flbernier	0ece66dc80	Add a internal start for rgbled_ncp5623c on fmu-v2 v3 v4pro	5 years ago
SalimTerryLi	c037dbef21	Rename and move src/drivers/adc to src/drivers/adc/board_adc	5 years ago
Daniel Agar	2c3441aa90	boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 - reduced now that calibration uses uORB::Subscription - can likely be reduced further (perhaps < 8) with additional testing	5 years ago
Daniel Agar	e3d31a881e	boards: NuttX disable posix message queues	5 years ago

1 2 3 4

186 Commits (fae1627d9294deb414df021b4e0d28ff989df34b)