Daniel Agar
fd11c3f7b1
clang-tidy disable cert-msc30-c rand() check
8 years ago
Daniel Agar
1bbca3bf1d
test_dataman add to SITL with minor updates
8 years ago
Julian Oes
9369262e63
navigator: allow more mission items
...
Since using more than 256 mission items has been tested and fixed, the
limit can now be raised to more than 256 (but smaller than UINT16_MAX).
Since the whole file is allocated in advance on NuttX, the limit there
is (arbitrarily) set to 2000. For POSIX archs such as SITL, we don't
really need to constrain ourselves any longer.
8 years ago
Julian Oes
8c1e85a65f
dataman: don't wrap around at 256
...
The dataman started overwriting contents after 256 items because the
item index were only uint8_t. This fix allows for more than 256
waypoints.
8 years ago
Lorenz Meier
081c40c6fa
Commander: Fix level cal command
8 years ago
Kabir Mohammed
e63747ec2f
lpe : changes to allow hybrid GPS-denied navigation
8 years ago
Kabir Mohammed
0f91378eeb
lpe : use vision timestamps to compute measurement delay
8 years ago
Kabir Mohammed
85df00d2da
lpe : use per-measurement variance for vision
8 years ago
Kabir Mohammed
48e7b94162
mavlink : track time offset faster
8 years ago
Kabir Mohammed
d831c262d0
mavlink : fix code style
8 years ago
Kabir Mohammed
444005f290
logger : Log new vision topics
8 years ago
Kabir Mohammed
3653d64b31
att_ekf : move to new vision topics
8 years ago
Kabir Mohammed
c65b8fffd3
sdlog2 : log new vision topic
8 years ago
Kabir Mohammed
a158d7f124
att_q : move to new vision attitude topic
8 years ago
Kabir Mohammed
bdcc626f29
mavlink : correct stream name for vision message
8 years ago
Kabir Mohammed
f43ee3a0f5
mavlink : use new vision estimate topic and fix stream name
8 years ago
Kabir Mohammed
294663854d
inav : move to new vision topic
8 years ago
Kabir Mohammed
7236bafee1
ekf2 : move to new vision topic
8 years ago
Kabir Mohammed
8eaddeee0a
lpe : move to new vision topic
8 years ago
Kabir Mohammed
f8775306d3
Remove deprecated vision_position_estimate topic
8 years ago
Kabir Mohammed
b643c94f0a
mavlink_receiver : Switch VISION_POSITION_ESTIMATE to new topics
8 years ago
Kabir Mohammed
569251dc2e
mavlink_receiver : Add external estimator interface
8 years ago
Sander Smeets
75f6b4eb0c
Readme changes
8 years ago
José Roberto de Souza
b7c53342dc
ROMFS: AeroFC: Start dataman with RAM backend
...
AeroFC don't have a SD Card or any other storage device, so changing
dataman backend to work over RAM to be able to load missions.
8 years ago
Roman
8c9f27bb8a
land detector (mc): takeoff throttle should be the same for all manual,
...
altitude controlled modes
Signed-off-by: Roman <bapstroman@gmail.com>
8 years ago
Phillip Kocmoud
ccfecd4ad2
Add support for the ICM-20602 to the Pixracer FMUv4 ( #6577 )
...
The current ICM-20608 is nearing EOL.
I have tested on both ICM-20608 and ICM-20602 based Pixracers.
8 years ago
Daniel Agar
8c837e72be
fixedwing_control example fix fds init ( #6575 )
8 years ago
Julian Oes
4ee8c43ea2
mavlink: send attitude quaternion in onboard mode
8 years ago
David Sidrane
7e425c8ff2
Disable bl_upload command on non F4 tartgets
...
Upstream nuttx needs to have the flash programing support added.
8 years ago
David Sidrane
94450eb43a
Use PX4_FLASH_BASE from micro HAL
8 years ago
David Sidrane
a2fa199a26
Define PX4_FLASH_BASE in micro HAL
8 years ago
Lorenz Meier
dfd02d8372
Plane interface: Fix motor scaling in simulator
8 years ago
Lorenz Meier
7f4601a50f
Plane: Fix motor scaling
8 years ago
ChristophTobler
0263ab8cd2
enable takeoff in gps denied areas and minor requested changes
8 years ago
ChristophTobler
64092f087f
fix landing angle if no gps
8 years ago
ChristophTobler
6a60ff9dc3
fix code style
8 years ago
ChristophTobler
52f5f1be07
update submodule ecl
8 years ago
ChristophTobler
1f7fdb2386
allow local position for takeoff (e.g. flow)
8 years ago
Matthias Grob
194f0c1de8
land_detector: ground detection corrected comment and clarified condition
8 years ago
Matthias Grob
9963cf532d
land_detector: refactored helper method names
8 years ago
Matthias Grob
c559f195ec
land_detector: Hotfix to prevent ground contact detection when descending velocity is very slow with manual stick all the way down
...
Now the stick down check is only done in manual control and the thrust low is again mandatory to detect ground in any case.
8 years ago
klopezal
b5858e729c
lis3mdl : correct offset and scale checks
8 years ago
Kevin
1167fba9ad
px4fmu-v4pro : adding correct logic for overcurrent sensing
8 years ago
Kevin
1ce0bafebd
lis3mdl : fix logic in check functions and code style
8 years ago
Kevin
62b4d2de0d
Fixing code style
8 years ago
klopezal
f09b60ad9e
lis3mdl : several fixes and enhancements
8 years ago
klopezal
089e50c574
px4fmu-v4pro : board configuration
8 years ago
Daniel Agar
b14cb952ae
sitl plane update tuning
8 years ago
Daniel Agar
ff68d63143
fw_pos_control_l1 force heading hold at flare
8 years ago
Daniel Agar
94d6a92f41
fw_pos_control_l1 publish quat in att_sp
8 years ago