#!nsh # # PX4FMU startup script for test hackery. # set unit_test_failure 0 uorb start if rgbled start then led_control on -c blue fi if sercon then echo "[i] USB interface connected" # Try to get an USB console nshterm /dev/ttyACM0 & fi # # Try to mount the microSD card. # mount -t vfat /dev/mmcsd0 /fs/microsd if [ $? == 0 ] then echo "[i] card mounted at /fs/microsd" # Start playing the startup tune tone_alarm start else echo "[i] no microSD card found" # Play SOS tone_alarm error fi # # Start a minimal system # # # Start the ORB (first app to start) # uorb start # # Load parameters # set PARAM_FILE /fs/microsd/params if mtd start then set PARAM_FILE /fs/mtd_params fi param select $PARAM_FILE if param load then echo "[param] Loaded: $PARAM_FILE" else echo "[param] FAILED loading $PARAM_FILE" fi if [ -f /etc/extras/px4io-v2.bin ] then set io_file /etc/extras/px4io-v2.bin else set io_file /etc/extras/px4io-v1.bin fi if px4io start then echo "PX4IO OK" else set unit_test_failure 1 set unit_test_failure_list "${unit_test_failure_list} px4io_start" fi if px4io checkcrc $io_file then echo "PX4IO CRC OK" else echo "PX4IO CRC failure" tone_alarm MBABGP if px4io forceupdate 14662 $io_file then if px4io start then echo "PX4IO restart OK" tone_alarm MSPAA else echo "PX4IO restart failed" tone_alarm MNGGG set unit_test_failure 1 set unit_test_failure_list "${unit_test_failure_list} px4io_flash" fi else echo "PX4IO update failed" tone_alarm MNGGG set unit_test_failure 1 set unit_test_failure_list "${unit_test_failure_list} px4io_flash" fi fi # # The presence of this file suggests we're running a mount stress test # if [ -f /fs/microsd/mount_test_cmds.txt ] then tests mount fi sh /etc/init.d/rc.sensors ver all # # Run unit tests at board boot, reporting failure as needed. # Add new unit tests using the same pattern as below. # if tests all then echo echo "All Unit Tests PASSED" led_control on -c green else echo echo "Some Unit Tests FAILED" led_control on -c red fi free