/****************************************************************************
 *
 *   Copyright (c) 2015 Estimation and Control Library (ECL). All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name ECL nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/**
 * @file ekf_helper.cpp
 * Definition of ekf helper functions.
 *
 * @author Roman Bast <bapstroman@gmail.com>
 *
 */

#include "ekf.h"

#include <ecl.h>
#include <mathlib/mathlib.h>
#include <cstdlib>


void Ekf::resetVelocity()
{
	if (_control_status.flags.gps && isTimedOut(_last_gps_fail_us, (uint64_t)_min_gps_health_time_us)) {
		// this reset is only called if we have new gps data at the fusion time horizon
		resetVelocityToGps();

	} else if (_control_status.flags.opt_flow) {
		resetHorizontalVelocityToOpticalFlow();

	} else if (_control_status.flags.ev_vel) {
		resetVelocityToVision();

	} else {
		resetHorizontalVelocityToZero();
	}
}

void Ekf::resetVelocityToGps() {
	ECL_INFO_TIMESTAMPED("reset velocity to GPS");
	resetVelocityTo(_gps_sample_delayed.vel);
	P.uncorrelateCovarianceSetVariance<3>(4, sq(_gps_sample_delayed.sacc));
}

void Ekf::resetHorizontalVelocityToOpticalFlow() {
	ECL_INFO_TIMESTAMPED("reset velocity to flow");
	// constrain height above ground to be above minimum possible
	const float heightAboveGndEst = fmaxf((_terrain_vpos - _state.pos(2)), _params.rng_gnd_clearance);

	// calculate absolute distance from focal point to centre of frame assuming a flat earth
	const float range = heightAboveGndEst / _range_sensor.getCosTilt();

	if ((range - _params.rng_gnd_clearance) > 0.3f && _flow_sample_delayed.dt > 0.05f) {
		// we should have reliable OF measurements so
		// calculate X and Y body relative velocities from OF measurements
		Vector3f vel_optflow_body;
		vel_optflow_body(0) = - range * _flow_compensated_XY_rad(1) / _flow_sample_delayed.dt;
		vel_optflow_body(1) =   range * _flow_compensated_XY_rad(0) / _flow_sample_delayed.dt;
		vel_optflow_body(2) = 0.0f;

		// rotate from body to earth frame
		const Vector3f vel_optflow_earth = _R_to_earth * vel_optflow_body;

		resetHorizontalVelocityTo(Vector2f(vel_optflow_earth));
	} else {
		resetHorizontalVelocityTo(Vector2f{0.f, 0.f});
	}

	// reset the horizontal velocity variance using the optical flow noise variance
	P.uncorrelateCovarianceSetVariance<2>(4, sq(range) * calcOptFlowMeasVar());
}

void Ekf::resetVelocityToVision() {
	ECL_INFO_TIMESTAMPED("reset to vision velocity");
	Vector3f _ev_vel = _ev_sample_delayed.vel;
	if(_params.fusion_mode & MASK_ROTATE_EV){
		_ev_vel = _R_ev_to_ekf *_ev_sample_delayed.vel;
	}
	resetVelocityTo(getVisionVelocityInEkfFrame());
	P.uncorrelateCovarianceSetVariance<3>(4, getVisionVelocityVarianceInEkfFrame());
}

void Ekf::resetHorizontalVelocityToZero() {
	ECL_INFO_TIMESTAMPED("reset velocity to zero");
	// Used when falling back to non-aiding mode of operation
	resetHorizontalVelocityTo(Vector2f{0.f, 0.f});
	P.uncorrelateCovarianceSetVariance<2>(4, 25.0f);
}

void Ekf::resetVelocityTo(const Vector3f &new_vel) {
	resetHorizontalVelocityTo(Vector2f(new_vel));
	resetVerticalVelocityTo(new_vel(2));
}

void Ekf::resetHorizontalVelocityTo(const Vector2f &new_horz_vel) {
	const Vector2f delta_horz_vel = new_horz_vel - Vector2f(_state.vel);
	_state.vel.xy() = new_horz_vel;

	for (uint8_t index = 0; index < _output_buffer.get_length(); index++) {
		_output_buffer[index].vel.xy() += delta_horz_vel;
	}
	_output_new.vel.xy() += delta_horz_vel;

	_state_reset_status.velNE_change = delta_horz_vel;
	_state_reset_status.velNE_counter++;
}

void Ekf::resetVerticalVelocityTo(float new_vert_vel) {
	const float delta_vert_vel = new_vert_vel - _state.vel(2);
	_state.vel(2) = new_vert_vel;

	for (uint8_t index = 0; index < _output_buffer.get_length(); index++) {
		_output_buffer[index].vel(2) += delta_vert_vel;
		_output_vert_buffer[index].vert_vel += delta_vert_vel;
	}
	_output_new.vel(2) += delta_vert_vel;
	_output_vert_delayed.vert_vel = new_vert_vel;
	_output_vert_new.vert_vel += delta_vert_vel;

	_state_reset_status.velD_change = delta_vert_vel;
	_state_reset_status.velD_counter++;
}


void Ekf::resetHorizontalPosition()
{
	// let the next odometry update know that the previous value of states cannot be used to calculate the change in position
	_hpos_prev_available = false;

	if (_control_status.flags.gps) {
		// this reset is only called if we have new gps data at the fusion time horizon
		resetHorizontalPositionToGps();

	} else if (_control_status.flags.ev_pos) {
		// this reset is only called if we have new ev data at the fusion time horizon
		resetHorizontalPositionToVision();

	} else if (_control_status.flags.opt_flow) {
		ECL_INFO_TIMESTAMPED("reset position to last known position");

		if (!_control_status.flags.in_air) {
			// we are likely starting OF for the first time so reset the horizontal position
			resetHorizontalPositionTo(Vector2f(0.f, 0.f));
		} else {
			resetHorizontalPositionTo(_last_known_posNE);
		}

		// estimate is relative to initial position in this mode, so we start with zero error.
		P.uncorrelateCovarianceSetVariance<2>(7, 0.0f);

	} else {
		ECL_INFO_TIMESTAMPED("reset position to last known position");
		// Used when falling back to non-aiding mode of operation
		resetHorizontalPositionTo(_last_known_posNE);
		P.uncorrelateCovarianceSetVariance<2>(7, sq(_params.pos_noaid_noise));
	}
}

void Ekf::resetHorizontalPositionToGps() {
	ECL_INFO_TIMESTAMPED("reset position to GPS");
	resetHorizontalPositionTo(_gps_sample_delayed.pos);
	P.uncorrelateCovarianceSetVariance<2>(7, sq(_gps_sample_delayed.hacc));
}

void Ekf::resetHorizontalPositionToVision() {
	ECL_INFO_TIMESTAMPED("reset position to ev position");
	Vector3f _ev_pos = _ev_sample_delayed.pos;
	if(_params.fusion_mode & MASK_ROTATE_EV){
		_ev_pos = _R_ev_to_ekf *_ev_sample_delayed.pos;
	}
	resetHorizontalPositionTo(Vector2f(_ev_pos));
	P.uncorrelateCovarianceSetVariance<2>(7, _ev_sample_delayed.posVar.slice<2, 1>(0, 0));
}

void Ekf::resetHorizontalPositionTo(const Vector2f &new_horz_pos) {
	const Vector2f delta_horz_pos = new_horz_pos - Vector2f(_state.pos);
	_state.pos.xy() = new_horz_pos;

	for (uint8_t index = 0; index < _output_buffer.get_length(); index++) {
		_output_buffer[index].pos.xy() += delta_horz_pos;
	}
	_output_new.pos.xy() += delta_horz_pos;

	_state_reset_status.posNE_change = delta_horz_pos;
	_state_reset_status.posNE_counter++;
}

// Reset height state using the last height measurement
void Ekf::resetHeight()
{
	// Get the most recent GPS data
	const gpsSample &gps_newest = _gps_buffer.get_newest();

	// store the current vertical position and velocity for reference so we can calculate and publish the reset amount
	const float old_vert_pos = _state.pos(2);
	bool vert_pos_reset = false;

	// reset the vertical position
	if (_control_status.flags.rng_hgt) {
		const float new_pos_down = _hgt_sensor_offset - _range_sensor.getDistBottom();

		// update the state and associated variance
		_state.pos(2) = new_pos_down;

		// the state variance is the same as the observation
		P.uncorrelateCovarianceSetVariance<1>(9, sq(_params.range_noise));

		vert_pos_reset = true;

		// reset the baro offset which is subtracted from the baro reading if we need to use it as a backup
		const baroSample &baro_newest = _baro_buffer.get_newest();
		_baro_hgt_offset = baro_newest.hgt + _state.pos(2);

	} else if (_control_status.flags.baro_hgt) {
		// initialize vertical position with newest baro measurement
		const baroSample &baro_newest = _baro_buffer.get_newest();

		if (!_baro_hgt_faulty) {
			_state.pos(2) = -baro_newest.hgt + _baro_hgt_offset;

			// the state variance is the same as the observation
			P.uncorrelateCovarianceSetVariance<1>(9, sq(_params.baro_noise));

			vert_pos_reset = true;

		} else {
			// TODO: reset to last known baro based estimate
		}

	} else if (_control_status.flags.gps_hgt) {
		// initialize vertical position and velocity with newest gps measurement
		if (!_gps_hgt_intermittent) {
			_state.pos(2) = _hgt_sensor_offset - gps_newest.hgt + _gps_alt_ref;

			// the state variance is the same as the observation
			P.uncorrelateCovarianceSetVariance<1>(9, sq(gps_newest.hacc));

			vert_pos_reset = true;

			// reset the baro offset which is subtracted from the baro reading if we need to use it as a backup
			const baroSample &baro_newest = _baro_buffer.get_newest();
			_baro_hgt_offset = baro_newest.hgt + _state.pos(2);

		} else {
			// TODO: reset to last known gps based estimate
		}

	} else if (_control_status.flags.ev_hgt) {
		// initialize vertical position with newest measurement
		const extVisionSample &ev_newest = _ext_vision_buffer.get_newest();

		// use the most recent data if it's time offset from the fusion time horizon is smaller
		const int32_t dt_newest = ev_newest.time_us - _imu_sample_delayed.time_us;
		const int32_t dt_delayed = _ev_sample_delayed.time_us - _imu_sample_delayed.time_us;

		vert_pos_reset = true;

		if (std::abs(dt_newest) < std::abs(dt_delayed)) {
			_state.pos(2) = ev_newest.pos(2);

		} else {
			_state.pos(2) = _ev_sample_delayed.pos(2);
		}

	}

	// reset the vertical velocity state
	if (_control_status.flags.gps && !_gps_hgt_intermittent) {
		// If we are using GPS, then use it to reset the vertical velocity
		resetVerticalVelocityTo(gps_newest.vel(2));

		// the state variance is the same as the observation
		P.uncorrelateCovarianceSetVariance<1>(6, sq(1.5f * gps_newest.sacc));

	} else {
		// we don't know what the vertical velocity is, so set it to zero
		resetVerticalVelocityTo(0.0f);

		// Set the variance to a value large enough to allow the state to converge quickly
		// that does not destabilise the filter
		P.uncorrelateCovarianceSetVariance<1>(6, 10.0f);
	}

	// store the reset amount and time to be published
	if (vert_pos_reset) {
		_state_reset_status.posD_change = _state.pos(2) - old_vert_pos;
		_state_reset_status.posD_counter++;
	}

	// apply the change in height / height rate to our newest height / height rate estimate
	// which have already been taken out from the output buffer
	if (vert_pos_reset) {
		_output_new.pos(2) += _state_reset_status.posD_change;
	}

	// add the reset amount to the output observer buffered data
	for (uint8_t i = 0; i < _output_buffer.get_length(); i++) {
		if (vert_pos_reset) {
			_output_buffer[i].pos(2) += _state_reset_status.posD_change;
			_output_vert_buffer[i].vert_vel_integ += _state_reset_status.posD_change;
		}
	}

	// add the reset amount to the output observer vertical position state
	if (vert_pos_reset) {
		_output_vert_delayed.vert_vel_integ = _state.pos(2);
		_output_vert_new.vert_vel_integ = _state.pos(2);
	}
}

// align output filter states to match EKF states at the fusion time horizon
void Ekf::alignOutputFilter()
{
	// calculate the quaternion rotation delta from the EKF to output observer states at the EKF fusion time horizon
	Quatf q_delta = _state.quat_nominal * _output_sample_delayed.quat_nominal.inversed();
	q_delta.normalize();

	// calculate the velocity and position deltas between the output and EKF at the EKF fusion time horizon
	const Vector3f vel_delta = _state.vel - _output_sample_delayed.vel;
	const Vector3f pos_delta = _state.pos - _output_sample_delayed.pos;

	// loop through the output filter state history and add the deltas
	for (uint8_t i = 0; i < _output_buffer.get_length(); i++) {
		_output_buffer[i].quat_nominal = q_delta * _output_buffer[i].quat_nominal;
		_output_buffer[i].quat_nominal.normalize();
		_output_buffer[i].vel += vel_delta;
		_output_buffer[i].pos += pos_delta;
	}

	_output_new.quat_nominal = q_delta * _output_new.quat_nominal;
	_output_new.quat_nominal.normalize();

	_output_sample_delayed.quat_nominal = q_delta * _output_sample_delayed.quat_nominal;
	_output_sample_delayed.quat_nominal.normalize();
}

// Do a forced re-alignment of the yaw angle to align with the horizontal velocity vector from the GPS.
// It is used to align the yaw angle after launch or takeoff for fixed wing vehicle only.
bool Ekf::realignYawGPS()
{
	const float gpsSpeed = sqrtf(sq(_gps_sample_delayed.vel(0)) + sq(_gps_sample_delayed.vel(1)));

	// Need at least 5 m/s of GPS horizontal speed and
	// ratio of velocity error to velocity < 0.15  for a reliable alignment
	const bool gps_yaw_alignment_possible = (gpsSpeed > 5.0f) && (_gps_sample_delayed.sacc < (0.15f * gpsSpeed));

	if (!gps_yaw_alignment_possible) {
		// attempt a normal alignment using the magnetometer
		return resetMagHeading(_mag_lpf.getState());
	}

	// check for excessive horizontal GPS velocity innovations
	const bool badVelInnov = (_gps_vel_test_ratio(0) > 1.0f) && _control_status.flags.gps;

	// calculate GPS course over ground angle
	const float gpsCOG = atan2f(_gps_sample_delayed.vel(1), _gps_sample_delayed.vel(0));

	// calculate course yaw angle
	const float ekfCOG = atan2f(_state.vel(1), _state.vel(0));

	// Check the EKF and GPS course over ground for consistency
	const float courseYawError = wrap_pi(gpsCOG - ekfCOG);

	// If the angles disagree and horizontal GPS velocity innovations are large or no previous yaw alignment, we declare the magnetic yaw as bad
	const bool badYawErr = fabsf(courseYawError) > 0.5f;
	const bool badMagYaw = (badYawErr && badVelInnov);

	if (badMagYaw) {
		_num_bad_flight_yaw_events ++;
	}

	// correct yaw angle using GPS ground course if compass yaw bad or yaw is previously not aligned
	if (badMagYaw || !_control_status.flags.yaw_align) {
		ECL_WARN_TIMESTAMPED("bad yaw, using GPS course");

		// declare the magnetometer as failed if a bad yaw has occurred more than once
		if (_control_status.flags.mag_aligned_in_flight && (_num_bad_flight_yaw_events >= 2) && !_control_status.flags.mag_fault) {
			ECL_WARN_TIMESTAMPED("stopping mag use");
			_control_status.flags.mag_fault = true;
		}

		// calculate new yaw estimate
		float yaw_new;
		if (!_control_status.flags.mag_aligned_in_flight) {
			// This is our first flight alignment so we can assume that the recent change in velocity has occurred due to a
			// forward direction takeoff or launch and therefore the inertial and GPS ground course discrepancy is due to yaw error
			const Eulerf euler321(_state.quat_nominal);
			yaw_new = euler321(2) + courseYawError;
			_control_status.flags.mag_aligned_in_flight = true;

		} else if (_control_status.flags.wind) {
			// we have previously aligned yaw in-flight and have wind estimates so set the yaw such that the vehicle nose is
			// aligned with the wind relative GPS velocity vector
			yaw_new = atan2f((_gps_sample_delayed.vel(1) - _state.wind_vel(1)),
						(_gps_sample_delayed.vel(0) - _state.wind_vel(0)));

		} else {
			// we don't have wind estimates, so align yaw to the GPS velocity vector
			yaw_new = atan2f(_gps_sample_delayed.vel(1), _gps_sample_delayed.vel(0));

		}

		// use the combined EKF and GPS speed variance to calculate a rough estimate of the yaw error after alignment
		const float SpdErrorVariance = sq(_gps_sample_delayed.sacc) + P(4,4) + P(5,5);
		const float sineYawError = math::constrain(sqrtf(SpdErrorVariance) / gpsSpeed, 0.0f, 1.0f);
		const float yaw_variance_new = sq(asinf(sineYawError));

		// Apply updated yaw and yaw variance to states and covariances
		resetQuatStateYaw(yaw_new, yaw_variance_new, true);

		// Use the last magnetometer measurements to reset the field states
		_state.mag_B.zero();
		_R_to_earth = Dcmf(_state.quat_nominal);
		_state.mag_I = _R_to_earth * _mag_sample_delayed.mag;

		resetMagCov();

		// record the start time for the magnetic field alignment
		_flt_mag_align_start_time = _imu_sample_delayed.time_us;

		// If heading was bad, then we also need to reset the velocity and position states
		_velpos_reset_request = badMagYaw;

		return true;

	} else {
		// align mag states only

		// calculate initial earth magnetic field states
		_state.mag_I = _R_to_earth * _mag_sample_delayed.mag;

		resetMagCov();

		// record the start time for the magnetic field alignment
		_flt_mag_align_start_time = _imu_sample_delayed.time_us;

		return true;
	}
}

// Reset heading and magnetic field states
bool Ekf::resetMagHeading(const Vector3f &mag_init, bool increase_yaw_var, bool update_buffer)
{
	// prevent a reset being performed more than once on the same frame
	if (_imu_sample_delayed.time_us == _flt_mag_align_start_time) {
		return true;
	}

	if (_params.mag_fusion_type >= MAG_FUSE_TYPE_NONE) {
		stopMagFusion();
		return false;
	}

	// calculate the observed yaw angle and yaw variance
	float yaw_new;
	float yaw_new_variance = 0.0f;
	if (_control_status.flags.ev_yaw) {
		// convert the observed quaternion to a rotation matrix
		const Dcmf R_to_earth_ev(_ev_sample_delayed.quat);	// transformation matrix from body to world frame

		// calculate the yaw angle for a 312 sequence
		yaw_new = atan2f(R_to_earth_ev(1, 0), R_to_earth_ev(0, 0));

		if (increase_yaw_var) {
			yaw_new_variance = fmaxf(_ev_sample_delayed.angVar, sq(1.0e-2f));
		}

	} else if (_params.mag_fusion_type <= MAG_FUSE_TYPE_3D) {
		// rotate the magnetometer measurements into earth frame using a zero yaw angle
		Dcmf R_to_earth;
		if (fabsf(_R_to_earth(2, 0)) < fabsf(_R_to_earth(2, 1))) {
			// rolled more than pitched so use 321 rotation order
			Eulerf euler321(_state.quat_nominal);
			euler321(2) = 0.0f;
			R_to_earth = Dcmf(euler321);

		} else {
			// pitched more than rolled so use 312 rotation order
			const Vector3f rotVec312(0.0f,  // yaw
						 asinf(_R_to_earth(2, 1)),  // roll
						 atan2f(-_R_to_earth(2, 0), _R_to_earth(2, 2)));  // pitch
			R_to_earth = taitBryan312ToRotMat(rotVec312);

		}

		// the angle of the projection onto the horizontal gives the yaw angle
		const Vector3f mag_earth_pred = R_to_earth * mag_init;
		yaw_new = -atan2f(mag_earth_pred(1), mag_earth_pred(0)) + getMagDeclination();

		if (increase_yaw_var) {
			yaw_new_variance = sq(fmaxf(_params.mag_heading_noise, 1.0e-2f));
		}

	} else if (_params.mag_fusion_type == MAG_FUSE_TYPE_INDOOR && _is_yaw_fusion_inhibited) {
		// we are operating temporarily without knowing the earth frame yaw angle
		return true;

	} else {
		// there is no yaw observation
		return false;
	}

	// update quaternion states and corresponding covarainces
	resetQuatStateYaw(yaw_new, yaw_new_variance, update_buffer);

	// set the earth magnetic field states using the updated rotation
	_state.mag_I = _R_to_earth * mag_init;

	resetMagCov();

	// record the time for the magnetic field alignment event
	_flt_mag_align_start_time = _imu_sample_delayed.time_us;

	return true;
}

// Return the magnetic declination in radians to be used by the alignment and fusion processing
float Ekf::getMagDeclination()
{
	// set source of magnetic declination for internal use
	if (_control_status.flags.mag_aligned_in_flight) {
		// Use value consistent with earth field state
		return atan2f(_state.mag_I(1), _state.mag_I(0));

	} else if (_params.mag_declination_source & MASK_USE_GEO_DECL) {
		// use parameter value until GPS is available, then use value returned by geo library
		if (_NED_origin_initialised) {
			return _mag_declination_gps;

		} else {
			return math::radians(_params.mag_declination_deg);
		}

	} else {
		// always use the parameter value
		return math::radians(_params.mag_declination_deg);
	}
}

void Ekf::constrainStates()
{
	_state.quat_nominal = matrix::constrain(_state.quat_nominal, -1.0f, 1.0f);
	_state.vel = matrix::constrain(_state.vel, -1000.0f, 1000.0f);
	_state.pos = matrix::constrain(_state.pos, -1.e6f, 1.e6f);

	const float delta_ang_bias_limit = math::radians(20.f) * _dt_ekf_avg;
	_state.delta_ang_bias = matrix::constrain(_state.delta_ang_bias, -delta_ang_bias_limit, delta_ang_bias_limit);

	const float delta_vel_bias_limit = _params.acc_bias_lim * _dt_ekf_avg;
	_state.delta_vel_bias = matrix::constrain(_state.delta_vel_bias, -delta_vel_bias_limit, delta_vel_bias_limit);

	_state.mag_I = matrix::constrain(_state.mag_I, -1.0f, 1.0f);
	_state.mag_B = matrix::constrain(_state.mag_B, -0.5f, 0.5f);
	_state.wind_vel = matrix::constrain(_state.wind_vel, -100.0f, 100.0f);
}

float Ekf::compensateBaroForDynamicPressure(const float baro_alt_uncompensated)
{
	// calculate static pressure error = Pmeas - Ptruth
	// model position error sensitivity as a body fixed ellipse with a different scale in the positive and
	// negative X and Y directions. Used to correct baro data for positional errors
	const matrix::Dcmf R_to_body(_output_new.quat_nominal.inversed());

	// Calculate airspeed in body frame
	const Vector3f velocity_earth = _output_new.vel - _vel_imu_rel_body_ned;

	const Vector3f wind_velocity_earth(_state.wind_vel(0), _state.wind_vel(1), 0.0f);

	const Vector3f airspeed_earth = velocity_earth - wind_velocity_earth;

	const Vector3f airspeed_body = R_to_body * airspeed_earth;

	const Vector3f K_pstatic_coef(airspeed_body(0) >= 0.0f ? _params.static_pressure_coef_xp : _params.static_pressure_coef_xn,
				      airspeed_body(1) >= 0.0f ? _params.static_pressure_coef_yp : _params.static_pressure_coef_yn,
				      _params.static_pressure_coef_z);

	const Vector3f airspeed_squared = matrix::min(airspeed_body.emult(airspeed_body), sq(_params.max_correction_airspeed));

	const float pstatic_err = 0.5f * _air_density * (airspeed_squared.dot(K_pstatic_coef));

	// correct baro measurement using pressure error estimate and assuming sea level gravity
	return baro_alt_uncompensated + pstatic_err / (_air_density * CONSTANTS_ONE_G);
}

// calculate the earth rotation vector
Vector3f Ekf::calcEarthRateNED(float lat_rad) const
{
	return Vector3f(CONSTANTS_EARTH_SPIN_RATE * cosf(lat_rad),
			0.0f,
			-CONSTANTS_EARTH_SPIN_RATE * sinf(lat_rad));
}

void Ekf::getGpsVelPosInnov(float hvel[2], float &vvel, float hpos[2],  float &vpos) const
{
	hvel[0] = _gps_vel_innov(0);
	hvel[1] = _gps_vel_innov(1);
	vvel    = _gps_vel_innov(2);
	hpos[0] = _gps_pos_innov(0);
	hpos[1] = _gps_pos_innov(1);
	vpos    = _gps_pos_innov(2);
}

void Ekf::getGpsVelPosInnovVar(float hvel[2], float &vvel, float hpos[2], float &vpos)  const
{
	hvel[0] = _gps_vel_innov_var(0);
	hvel[1] = _gps_vel_innov_var(1);
	vvel    = _gps_vel_innov_var(2);
	hpos[0] = _gps_pos_innov_var(0);
	hpos[1] = _gps_pos_innov_var(1);
	vpos    = _gps_pos_innov_var(2);
}

void Ekf::getGpsVelPosInnovRatio(float &hvel, float &vvel, float &hpos, float &vpos) const
{
	hvel = _gps_vel_test_ratio(0);
	vvel = _gps_vel_test_ratio(1);
	hpos = _gps_pos_test_ratio(0);
	vpos = _gps_pos_test_ratio(1);
}

void Ekf::getEvVelPosInnov(float hvel[2], float &vvel, float hpos[2], float &vpos) const
{
	hvel[0] = _ev_vel_innov(0);
	hvel[1] = _ev_vel_innov(1);
	vvel    = _ev_vel_innov(2);
	hpos[0] = _ev_pos_innov(0);
	hpos[1] = _ev_pos_innov(1);
	vpos    = _ev_pos_innov(2);
}

void Ekf::getEvVelPosInnovVar(float hvel[2], float &vvel, float hpos[2], float &vpos) const
{
	hvel[0] = _ev_vel_innov_var(0);
	hvel[1] = _ev_vel_innov_var(1);
	vvel    = _ev_vel_innov_var(2);
	hpos[0] = _ev_pos_innov_var(0);
	hpos[1] = _ev_pos_innov_var(1);
	vpos    = _ev_pos_innov_var(2);
}

void Ekf::getEvVelPosInnovRatio(float &hvel, float &vvel, float &hpos, float &vpos) const
{
	hvel = _ev_vel_test_ratio(0);
	vvel = _ev_vel_test_ratio(1);
	hpos = _ev_pos_test_ratio(0);
	vpos = _ev_pos_test_ratio(1);
}

void Ekf::getBaroHgtInnov(float &baro_hgt_innov) const
{
	baro_hgt_innov = _baro_hgt_innov(2);
}

void Ekf::getBaroHgtInnovVar(float &baro_hgt_innov_var) const
{
	baro_hgt_innov_var = _baro_hgt_innov_var(2);
}

void Ekf::getBaroHgtInnovRatio(float &baro_hgt_innov_ratio) const
{
	baro_hgt_innov_ratio = _baro_hgt_test_ratio(1);
}

void Ekf::getRngHgtInnov(float &rng_hgt_innov) const
{
	rng_hgt_innov = _rng_hgt_innov(2);
}

void Ekf::getRngHgtInnovVar(float &rng_hgt_innov_var) const
{
	rng_hgt_innov_var = _rng_hgt_innov_var(2);
}

void Ekf::getRngHgtInnovRatio(float &rng_hgt_innov_ratio) const
{
	rng_hgt_innov_ratio = _rng_hgt_test_ratio(1);
}

void Ekf::getAuxVelInnov(float aux_vel_innov[2]) const
{
	aux_vel_innov[0] = _aux_vel_innov(0);
	aux_vel_innov[1] = _aux_vel_innov(1);
}

void Ekf::getAuxVelInnovVar(float aux_vel_innov_var[2]) const
{
	aux_vel_innov_var[0] = _aux_vel_innov_var(0);
	aux_vel_innov_var[1] = _aux_vel_innov_var(1);
}

void Ekf::getAuxVelInnovRatio(float &aux_vel_innov_ratio) const
{
	aux_vel_innov_ratio = _aux_vel_test_ratio(0);
}

void Ekf::getFlowInnov(float flow_innov[2]) const
{
	_flow_innov.copyTo(flow_innov);
}

void Ekf::getFlowInnovVar(float flow_innov_var[2]) const
{
	_flow_innov_var.copyTo(flow_innov_var);
}

void Ekf::getFlowInnovRatio(float &flow_innov_ratio) const
{
	flow_innov_ratio = _optflow_test_ratio;
}

void Ekf::getHeadingInnov(float &heading_innov) const
{
	heading_innov = _heading_innov;
}

void Ekf::getHeadingInnovVar(float &heading_innov_var) const
{
	heading_innov_var = _heading_innov_var;
}

void Ekf::getHeadingInnovRatio(float &heading_innov_ratio) const
{
	heading_innov_ratio = _yaw_test_ratio;
}

void Ekf::getMagInnov(float mag_innov[3]) const
{
	_mag_innov.copyTo(mag_innov);
}

void Ekf::getMagInnovVar(float mag_innov_var[3]) const
{
	_mag_innov_var.copyTo(mag_innov_var);
}

void Ekf::getMagInnovRatio(float &mag_innov_ratio) const
{
	mag_innov_ratio = _mag_test_ratio.max();
}

void Ekf::getDragInnov(float drag_innov[2]) const
{
	_drag_innov.copyTo(drag_innov);
}

void Ekf::getDragInnovVar(float drag_innov_var[2]) const
{
	_drag_innov_var.copyTo(drag_innov_var);
}

void Ekf::getDragInnovRatio(float drag_innov_ratio[2]) const
{
	_drag_test_ratio.copyTo(drag_innov_ratio);
}

void Ekf::getAirspeedInnov(float &airspeed_innov) const
{
	airspeed_innov = _airspeed_innov;
}

void Ekf::getAirspeedInnovVar(float &airspeed_innov_var) const
{
	airspeed_innov_var = _airspeed_innov_var;
}

void Ekf::getAirspeedInnovRatio(float &airspeed_innov_ratio) const
{
	airspeed_innov_ratio = _tas_test_ratio;
}

void Ekf::getBetaInnov(float &beta_innov) const
{
	beta_innov = _beta_innov;
}

void Ekf::getBetaInnovVar(float &beta_innov_var) const
{
	beta_innov_var = _beta_innov_var;
}

void Ekf::getBetaInnovRatio(float &beta_innov_ratio) const
{
	beta_innov_ratio = _beta_test_ratio;
}

void Ekf::getHaglInnov(float &hagl_innov) const
{
	hagl_innov = _hagl_innov;
}

void Ekf::getHaglInnovVar(float &hagl_innov_var) const
{
	hagl_innov_var = _hagl_innov_var;
}

void Ekf::getHaglInnovRatio(float &hagl_innov_ratio) const
{
	hagl_innov_ratio = _hagl_test_ratio;
}

// get GPS check status
void Ekf::get_gps_check_status(uint16_t *val)
{
	*val = _gps_check_fail_status.value;
}

// get the state vector at the delayed time horizon
matrix::Vector<float, 24> Ekf::getStateAtFusionHorizonAsVector() const
{
	matrix::Vector<float, 24> state;
	state.slice<4, 1>(0, 0) = _state.quat_nominal;
	state.slice<3, 1>(4, 0) = _state.vel;
	state.slice<3, 1>(7, 0) = _state.pos;
	state.slice<3, 1>(10, 0) = _state.delta_ang_bias;
	state.slice<3, 1>(13, 0) = _state.delta_vel_bias;
	state.slice<3, 1>(16, 0) = _state.mag_I;
	state.slice<3, 1>(19, 0) = _state.mag_B;
	state.slice<2, 1>(22, 0) = _state.wind_vel;
	return state;
}

Vector3f Ekf::getAccelBias() const
{
	return _state.delta_vel_bias / _dt_ekf_avg;
}

Vector3f Ekf::getGyroBias() const
{
	return _state.delta_ang_bias / _dt_ekf_avg;
}

// get the position and height of the ekf origin in WGS-84 coordinates and time the origin was set
// return true if the origin is valid
bool Ekf::get_ekf_origin(uint64_t *origin_time, map_projection_reference_s *origin_pos, float *origin_alt)
{
	memcpy(origin_time, &_last_gps_origin_time_us, sizeof(uint64_t));
	memcpy(origin_pos, &_pos_ref, sizeof(map_projection_reference_s));
	memcpy(origin_alt, &_gps_alt_ref, sizeof(float));
	return _NED_origin_initialised;
}

// return a vector containing the output predictor angular, velocity and position tracking
// error magnitudes (rad), (m/s), (m)
Vector3f Ekf::getOutputTrackingError() const
{
	return _output_tracking_error;
}

/*
Returns  following IMU vibration metrics in the following array locations
0 : Gyro delta angle coning metric = filtered length of (delta_angle x prev_delta_angle)
1 : Gyro high frequency vibe = filtered length of (delta_angle - prev_delta_angle)
2 : Accel high frequency vibe = filtered length of (delta_velocity - prev_delta_velocity)
*/
Vector3f Ekf::getImuVibrationMetrics() const
{
	return _vibe_metrics;
}

/*
	First argument returns GPS drift  metrics in the following array locations
	0 : Horizontal position drift rate (m/s)
	1 : Vertical position drift rate (m/s)
	2 : Filtered horizontal velocity (m/s)
	Second argument returns true when IMU movement is blocking the drift calculation
	Function returns true if the metrics have been updated and not returned previously by this function
*/
bool Ekf::get_gps_drift_metrics(float drift[3], bool *blocked)
{
	memcpy(drift, _gps_drift_metrics, 3 * sizeof(float));
	*blocked = !_control_status.flags.vehicle_at_rest;
	if (_gps_drift_updated) {
		_gps_drift_updated = false;
		return true;
	}
	return false;
}

// get the 1-sigma horizontal and vertical position uncertainty of the ekf WGS-84 position
void Ekf::get_ekf_gpos_accuracy(float *ekf_eph, float *ekf_epv)
{
	// report absolute accuracy taking into account the uncertainty in location of the origin
	// If not aiding, return 0 for horizontal position estimate as no estimate is available
	// TODO - allow for baro drift in vertical position error
	float hpos_err = sqrtf(P(7,7) + P(8,8) + sq(_gps_origin_eph));

	// If we are dead-reckoning, use the innovations as a conservative alternate measure of the horizontal position error
	// The reason is that complete rejection of measurements is often caused by heading misalignment or inertial sensing errors
	// and using state variances for accuracy reporting is overly optimistic in these situations
	if (_is_dead_reckoning && (_control_status.flags.gps)) {
		hpos_err = math::max(hpos_err, sqrtf(sq(_gps_pos_innov(0)) + sq(_gps_pos_innov(1))));
	}
	else if (_is_dead_reckoning && (_control_status.flags.ev_pos)) {
		hpos_err = math::max(hpos_err, sqrtf(sq(_ev_pos_innov(0)) + sq(_ev_pos_innov(1))));
	}

	*ekf_eph = hpos_err;
	*ekf_epv = sqrtf(P(9,9) + sq(_gps_origin_epv));
}

// get the 1-sigma horizontal and vertical position uncertainty of the ekf local position
void Ekf::get_ekf_lpos_accuracy(float *ekf_eph, float *ekf_epv)
{
	// TODO - allow for baro drift in vertical position error
	float hpos_err = sqrtf(P(7,7) + P(8,8));

	// If we are dead-reckoning, use the innovations as a conservative alternate measure of the horizontal position error
	// The reason is that complete rejection of measurements is often caused by heading misalignment or inertial sensing errors
	// and using state variances for accuracy reporting is overly optimistic in these situations
	if (_is_dead_reckoning && _control_status.flags.gps) {
		hpos_err = math::max(hpos_err, sqrtf(sq(_gps_pos_innov(0)) + sq(_gps_pos_innov(1))));
	}

	*ekf_eph = hpos_err;
	*ekf_epv = sqrtf(P(9,9));
}

// get the 1-sigma horizontal and vertical velocity uncertainty
void Ekf::get_ekf_vel_accuracy(float *ekf_evh, float *ekf_evv)
{
	float hvel_err = sqrtf(P(4,4) + P(5,5));

	// If we are dead-reckoning, use the innovations as a conservative alternate measure of the horizontal velocity error
	// The reason is that complete rejection of measurements is often caused by heading misalignment or inertial sensing errors
	// and using state variances for accuracy reporting is overly optimistic in these situations
	if (_is_dead_reckoning) {
		float vel_err_conservative = 0.0f;

		if (_control_status.flags.opt_flow) {
			float gndclearance = math::max(_params.rng_gnd_clearance, 0.1f);
			vel_err_conservative = math::max((_terrain_vpos - _state.pos(2)), gndclearance) * _flow_innov.norm();
		}

		if (_control_status.flags.gps) {
			vel_err_conservative = math::max(vel_err_conservative, sqrtf(sq(_gps_pos_innov(0)) + sq(_gps_pos_innov(1))));
		}
		else if (_control_status.flags.ev_pos) {
			vel_err_conservative = math::max(vel_err_conservative, sqrtf(sq(_ev_pos_innov(0)) + sq(_ev_pos_innov(1))));
		}

		if (_control_status.flags.ev_vel) {
			vel_err_conservative = math::max(vel_err_conservative, sqrtf(sq(_ev_vel_innov(0)) + sq(_ev_vel_innov(1))));
		}
		hvel_err = math::max(hvel_err, vel_err_conservative);
	}

	*ekf_evh = hvel_err;
	*ekf_evv = sqrtf(P(6,6));
}

/*
Returns the following vehicle control limits required by the estimator to keep within sensor limitations.
vxy_max : Maximum ground relative horizontal speed (meters/sec). NaN when limiting is not needed.
vz_max : Maximum ground relative vertical speed (meters/sec). NaN when limiting is not needed.
hagl_min : Minimum height above ground (meters). NaN when limiting is not needed.
hagl_max : Maximum height above ground (meters). NaN when limiting is not needed.
*/
void Ekf::get_ekf_ctrl_limits(float *vxy_max, float *vz_max, float *hagl_min, float *hagl_max)
{
	// Calculate range finder limits
	const float rangefinder_hagl_min = _range_sensor.getValidMinVal();
	// Allow use of 75% of rangefinder maximum range to allow for angular motion
	const float rangefinder_hagl_max = 0.75f * _range_sensor.getValidMaxVal();

	// Calculate optical flow limits
	// Allow ground relative velocity to use 50% of available flow sensor range to allow for angular motion
	const float flow_vxy_max = fmaxf(0.5f * _flow_max_rate * (_terrain_vpos - _state.pos(2)), 0.0f);
	const float flow_hagl_min = _flow_min_distance;
	const float flow_hagl_max = _flow_max_distance;

	// TODO : calculate visual odometry limits

	const bool relying_on_rangefinder = _control_status.flags.rng_hgt && !_params.range_aid;

	const bool relying_on_optical_flow = isOnlyActiveSourceOfHorizontalAiding(_control_status.flags.opt_flow);

	// Do not require limiting by default
	*vxy_max = NAN;
	*vz_max = NAN;
	*hagl_min = NAN;
	*hagl_max = NAN;

	// Keep within range sensor limit when using rangefinder as primary height source
	if (relying_on_rangefinder) {
		*vxy_max = NAN;
		*vz_max = NAN;
		*hagl_min = rangefinder_hagl_min;
		*hagl_max = rangefinder_hagl_max;
	}

	// Keep within flow AND range sensor limits when exclusively using optical flow
	if (relying_on_optical_flow) {
		*vxy_max = flow_vxy_max;
		*vz_max = NAN;
		*hagl_min = fmaxf(rangefinder_hagl_min, flow_hagl_min);
		*hagl_max = fminf(rangefinder_hagl_max, flow_hagl_max);
	}

}

bool Ekf::reset_imu_bias()
{
	if (_imu_sample_delayed.time_us - _last_imu_bias_cov_reset_us < (uint64_t)10e6) {
		return false;

	}

	// Zero the delta angle and delta velocity bias states
	_state.delta_ang_bias.zero();
	_state.delta_vel_bias.zero();

	// Zero the corresponding covariances and set
	// variances to the values use for initial alignment
	P.uncorrelateCovarianceSetVariance<3>(10, sq(_params.switch_on_gyro_bias * FILTER_UPDATE_PERIOD_S));
	P.uncorrelateCovarianceSetVariance<3>(13, sq(_params.switch_on_accel_bias * FILTER_UPDATE_PERIOD_S));
	_last_imu_bias_cov_reset_us = _imu_sample_delayed.time_us;

	// Set previous frame values
	_prev_dvel_bias_var = P.slice<3,3>(13,13).diag();

	return true;
}

// get EKF innovation consistency check status information comprising of:
// status - a bitmask integer containing the pass/fail status for each EKF measurement innovation consistency check
// Innovation Test Ratios - these are the ratio of the innovation to the acceptance threshold.
// A value > 1 indicates that the sensor measurement has exceeded the maximum acceptable level and has been rejected by the EKF
// Where a measurement type is a vector quantity, eg magnetometer, GPS position, etc, the maximum value is returned.
void Ekf::get_innovation_test_status(uint16_t &status, float &mag, float &vel, float &pos, float &hgt, float &tas, float &hagl, float &beta)
{
	// return the integer bitmask containing the consistency check pass/fail status
	status = _innov_check_fail_status.value;
	// return the largest magnetometer innovation test ratio
	mag = sqrtf(math::max(_yaw_test_ratio,_mag_test_ratio.max()));
	// return the largest velocity innovation test ratio
	vel = math::max(sqrtf(math::max(_gps_vel_test_ratio(0), _gps_vel_test_ratio(1))),
			sqrtf(math::max(_ev_vel_test_ratio(0), _ev_vel_test_ratio(1))));
	// return the largest position innovation test ratio
	pos = math::max(sqrtf(_gps_pos_test_ratio(0)),sqrtf(_ev_pos_test_ratio(0)));

	// return the vertical position innovation test ratio
	hgt = sqrtf(_gps_pos_test_ratio(0));
	// return the airspeed fusion innovation test ratio
	tas = sqrtf(_tas_test_ratio);
	// return the terrain height innovation test ratio
	hagl = sqrtf(_hagl_test_ratio);
	// return the synthetic sideslip innovation test ratio
	beta = sqrtf(_beta_test_ratio);
}

// return a bitmask integer that describes which state estimates are valid
void Ekf::get_ekf_soln_status(uint16_t *status)
{
	ekf_solution_status soln_status;
	// TODO: Is this accurate enough?
	soln_status.flags.attitude = _control_status.flags.tilt_align && _control_status.flags.yaw_align && (_fault_status.value == 0);
	soln_status.flags.velocity_horiz = (isHorizontalAidingActive() || (_control_status.flags.fuse_beta && _control_status.flags.fuse_aspd)) && (_fault_status.value == 0);
	soln_status.flags.velocity_vert = (_control_status.flags.baro_hgt || _control_status.flags.ev_hgt || _control_status.flags.gps_hgt || _control_status.flags.rng_hgt) && (_fault_status.value == 0);
	soln_status.flags.pos_horiz_rel = (_control_status.flags.gps || _control_status.flags.ev_pos || _control_status.flags.opt_flow) && (_fault_status.value == 0);
	soln_status.flags.pos_horiz_abs = (_control_status.flags.gps || _control_status.flags.ev_pos) && (_fault_status.value == 0);
	soln_status.flags.pos_vert_abs = soln_status.flags.velocity_vert;
	soln_status.flags.pos_vert_agl = isTerrainEstimateValid();
	soln_status.flags.const_pos_mode = !soln_status.flags.velocity_horiz;
	soln_status.flags.pred_pos_horiz_rel = soln_status.flags.pos_horiz_rel;
	soln_status.flags.pred_pos_horiz_abs = soln_status.flags.pos_horiz_abs;
	const bool gps_vel_innov_bad = (_gps_vel_test_ratio(0) > 1.0f) || (_gps_vel_test_ratio(1) > 1.0f);
	const bool gps_pos_innov_bad = (_gps_pos_test_ratio(0) > 1.0f);
	const bool mag_innov_good = (_mag_test_ratio.max() < 1.0f) && (_yaw_test_ratio < 1.0f);
	soln_status.flags.gps_glitch = (gps_vel_innov_bad || gps_pos_innov_bad) && mag_innov_good;
	soln_status.flags.accel_error = _bad_vert_accel_detected;
	*status = soln_status.value;
}

void Ekf::fuse(const Vector24f& K, float innovation)
{
	_state.quat_nominal -= K.slice<4, 1>(0, 0) * innovation;
	_state.quat_nominal.normalize();
	_state.vel -= K.slice<3, 1>(4, 0) * innovation;
	_state.pos -= K.slice<3, 1>(7, 0) * innovation;
	_state.delta_ang_bias -= K.slice<3, 1>(10, 0) * innovation;
	_state.delta_vel_bias -= K.slice<3, 1>(13, 0) * innovation;
	_state.mag_I -= K.slice<3, 1>(16, 0) * innovation;
	_state.mag_B -= K.slice<3, 1>(19, 0) * innovation;
	_state.wind_vel -= K.slice<2, 1>(22, 0) * innovation;
}

void Ekf::uncorrelateQuatFromOtherStates()
{
	P.slice<_k_num_states - 4, 4>(4, 0) = 0.f;
	P.slice<4, _k_num_states - 4>(0, 4) = 0.f;
}

bool Ekf::global_position_is_valid()
{
	// return true if the origin is set we are not doing unconstrained free inertial navigation
	// and have not started using synthetic position observations to constrain drift
	return (_NED_origin_initialised && !_deadreckon_time_exceeded && !_using_synthetic_position);
}

// return true if we are totally reliant on inertial dead-reckoning for position
void Ekf::update_deadreckoning_status()
{
	const bool velPosAiding = (_control_status.flags.gps || _control_status.flags.ev_pos || _control_status.flags.ev_vel)
				&& (isRecent(_time_last_hor_pos_fuse, _params.no_aid_timeout_max)
				|| isRecent(_time_last_hor_vel_fuse, _params.no_aid_timeout_max)
				|| isRecent(_time_last_delpos_fuse, _params.no_aid_timeout_max));
	const bool optFlowAiding = _control_status.flags.opt_flow && isRecent(_time_last_of_fuse, _params.no_aid_timeout_max);
	const bool airDataAiding = _control_status.flags.wind &&
				   isRecent(_time_last_arsp_fuse, _params.no_aid_timeout_max) &&
				   isRecent(_time_last_beta_fuse, _params.no_aid_timeout_max);

	_is_wind_dead_reckoning = !velPosAiding && !optFlowAiding && airDataAiding;
	_is_dead_reckoning = !velPosAiding && !optFlowAiding && !airDataAiding;

	if (!_is_dead_reckoning) {
		_time_last_aiding = _time_last_imu - _params.no_aid_timeout_max;
	}

	// report if we have been deadreckoning for too long, initial state is deadreckoning until aiding is present
	_deadreckon_time_exceeded = (_time_last_aiding == 0) || isTimedOut(_time_last_aiding, (uint64_t)_params.valid_timeout_max);
}

// calculate the variances for the rotation vector equivalent
Vector3f Ekf::calcRotVecVariances()
{
	Vector3f rot_var_vec;
	float q0, q1, q2, q3;

	if (_state.quat_nominal(0) >= 0.0f) {
		q0 = _state.quat_nominal(0);
		q1 = _state.quat_nominal(1);
		q2 = _state.quat_nominal(2);
		q3 = _state.quat_nominal(3);

	} else {
		q0 = -_state.quat_nominal(0);
		q1 = -_state.quat_nominal(1);
		q2 = -_state.quat_nominal(2);
		q3 = -_state.quat_nominal(3);
	}
	float t2 = q0*q0;
	float t3 = acosf(q0);
	float t4 = -t2+1.0f;
	float t5 = t2-1.0f;
	if ((t4 > 1e-9f) && (t5 < -1e-9f)) {
		float t6 = 1.0f/t5;
		float t7 = q1*t6*2.0f;
		float t8 = 1.0f/powf(t4,1.5f);
		float t9 = q0*q1*t3*t8*2.0f;
		float t10 = t7+t9;
		float t11 = 1.0f/sqrtf(t4);
		float t12 = q2*t6*2.0f;
		float t13 = q0*q2*t3*t8*2.0f;
		float t14 = t12+t13;
		float t15 = q3*t6*2.0f;
		float t16 = q0*q3*t3*t8*2.0f;
		float t17 = t15+t16;
		rot_var_vec(0) = t10*(P(0,0)*t10+P(1,0)*t3*t11*2.0f)+t3*t11*(P(0,1)*t10+P(1,1)*t3*t11*2.0f)*2.0f;
		rot_var_vec(1) = t14*(P(0,0)*t14+P(2,0)*t3*t11*2.0f)+t3*t11*(P(0,2)*t14+P(2,2)*t3*t11*2.0f)*2.0f;
		rot_var_vec(2) = t17*(P(0,0)*t17+P(3,0)*t3*t11*2.0f)+t3*t11*(P(0,3)*t17+P(3,3)*t3*t11*2.0f)*2.0f;
	} else {
		rot_var_vec = 4.0f * P.slice<3,3>(1,1).diag();
	}

	return rot_var_vec;
}

// initialise the quaternion covariances using rotation vector variances
// do not call before quaternion states are initialised
void Ekf::initialiseQuatCovariances(Vector3f &rot_vec_var)
{
	// calculate an equivalent rotation vector from the quaternion
	float q0,q1,q2,q3;
	if (_state.quat_nominal(0) >= 0.0f) {
		q0 = _state.quat_nominal(0);
		q1 = _state.quat_nominal(1);
		q2 = _state.quat_nominal(2);
		q3 = _state.quat_nominal(3);

	} else {
		q0 = -_state.quat_nominal(0);
		q1 = -_state.quat_nominal(1);
		q2 = -_state.quat_nominal(2);
		q3 = -_state.quat_nominal(3);
	}
	float delta = 2.0f*acosf(q0);
	float scaler = (delta/sinf(delta*0.5f));
	float rotX = scaler*q1;
	float rotY = scaler*q2;
	float rotZ = scaler*q3;

	// autocode generated using matlab symbolic toolbox
	float t2 = rotX*rotX;
	float t4 = rotY*rotY;
	float t5 = rotZ*rotZ;
	float t6 = t2+t4+t5;
	if (t6 > 1e-9f) {
		float t7 = sqrtf(t6);
		float t8 = t7*0.5f;
		float t3 = sinf(t8);
		float t9 = t3*t3;
		float t10 = 1.0f/t6;
		float t11 = 1.0f/sqrtf(t6);
		float t12 = cosf(t8);
		float t13 = 1.0f/powf(t6,1.5f);
		float t14 = t3*t11;
		float t15 = rotX*rotY*t3*t13;
		float t16 = rotX*rotZ*t3*t13;
		float t17 = rotY*rotZ*t3*t13;
		float t18 = t2*t10*t12*0.5f;
		float t27 = t2*t3*t13;
		float t19 = t14+t18-t27;
		float t23 = rotX*rotY*t10*t12*0.5f;
		float t28 = t15-t23;
		float t20 = rotY*rot_vec_var(1)*t3*t11*t28*0.5f;
		float t25 = rotX*rotZ*t10*t12*0.5f;
		float t31 = t16-t25;
		float t21 = rotZ*rot_vec_var(2)*t3*t11*t31*0.5f;
		float t22 = t20+t21-rotX*rot_vec_var(0)*t3*t11*t19*0.5f;
		float t24 = t15-t23;
		float t26 = t16-t25;
		float t29 = t4*t10*t12*0.5f;
		float t34 = t3*t4*t13;
		float t30 = t14+t29-t34;
		float t32 = t5*t10*t12*0.5f;
		float t40 = t3*t5*t13;
		float t33 = t14+t32-t40;
		float t36 = rotY*rotZ*t10*t12*0.5f;
		float t39 = t17-t36;
		float t35 = rotZ*rot_vec_var(2)*t3*t11*t39*0.5f;
		float t37 = t15-t23;
		float t38 = t17-t36;
		float t41 = rot_vec_var(0)*(t15-t23)*(t16-t25);
		float t42 = t41-rot_vec_var(1)*t30*t39-rot_vec_var(2)*t33*t39;
		float t43 = t16-t25;
		float t44 = t17-t36;

		// zero all the quaternion covariances
		P.uncorrelateCovarianceSetVariance<2>(0, 0.0f);
		P.uncorrelateCovarianceSetVariance<2>(2, 0.0f);


		// Update the quaternion internal covariances using auto-code generated using matlab symbolic toolbox
		P(0,0) = rot_vec_var(0)*t2*t9*t10*0.25f+rot_vec_var(1)*t4*t9*t10*0.25f+rot_vec_var(2)*t5*t9*t10*0.25f;
		P(0,1) = t22;
		P(0,2) = t35+rotX*rot_vec_var(0)*t3*t11*(t15-rotX*rotY*t10*t12*0.5f)*0.5f-rotY*rot_vec_var(1)*t3*t11*t30*0.5f;
		P(0,3) = rotX*rot_vec_var(0)*t3*t11*(t16-rotX*rotZ*t10*t12*0.5f)*0.5f+rotY*rot_vec_var(1)*t3*t11*(t17-rotY*rotZ*t10*t12*0.5f)*0.5f-rotZ*rot_vec_var(2)*t3*t11*t33*0.5f;
		P(1,0) = t22;
		P(1,1) = rot_vec_var(0)*(t19*t19)+rot_vec_var(1)*(t24*t24)+rot_vec_var(2)*(t26*t26);
		P(1,2) = rot_vec_var(2)*(t16-t25)*(t17-rotY*rotZ*t10*t12*0.5f)-rot_vec_var(0)*t19*t28-rot_vec_var(1)*t28*t30;
		P(1,3) = rot_vec_var(1)*(t15-t23)*(t17-rotY*rotZ*t10*t12*0.5f)-rot_vec_var(0)*t19*t31-rot_vec_var(2)*t31*t33;
		P(2,0) = t35-rotY*rot_vec_var(1)*t3*t11*t30*0.5f+rotX*rot_vec_var(0)*t3*t11*(t15-t23)*0.5f;
		P(2,1) = rot_vec_var(2)*(t16-t25)*(t17-t36)-rot_vec_var(0)*t19*t28-rot_vec_var(1)*t28*t30;
		P(2,2) = rot_vec_var(1)*(t30*t30)+rot_vec_var(0)*(t37*t37)+rot_vec_var(2)*(t38*t38);
		P(2,3) = t42;
		P(3,0) = rotZ*rot_vec_var(2)*t3*t11*t33*(-0.5f)+rotX*rot_vec_var(0)*t3*t11*(t16-t25)*0.5f+rotY*rot_vec_var(1)*t3*t11*(t17-t36)*0.5f;
		P(3,1) = rot_vec_var(1)*(t15-t23)*(t17-t36)-rot_vec_var(0)*t19*t31-rot_vec_var(2)*t31*t33;
		P(3,2) = t42;
		P(3,3) = rot_vec_var(2)*(t33*t33)+rot_vec_var(0)*(t43*t43)+rot_vec_var(1)*(t44*t44);

	} else {
		// the equations are badly conditioned so use a small angle approximation
		P.uncorrelateCovarianceSetVariance<1>(0, 0.0f);
		P.uncorrelateCovarianceSetVariance<3>(1, 0.25f * rot_vec_var);
	}
}

void Ekf::setControlBaroHeight()
{
	_control_status.flags.baro_hgt = true;

	_control_status.flags.gps_hgt = false;
	_control_status.flags.rng_hgt = false;
	_control_status.flags.ev_hgt = false;
}

void Ekf::setControlRangeHeight()
{
	_control_status.flags.rng_hgt = true;

	_control_status.flags.baro_hgt = false;
	_control_status.flags.gps_hgt = false;
	_control_status.flags.ev_hgt = false;
}

void Ekf::setControlGPSHeight()
{
	_control_status.flags.gps_hgt = true;

	_control_status.flags.baro_hgt = false;
	_control_status.flags.rng_hgt = false;
	_control_status.flags.ev_hgt = false;
}

void Ekf::setControlEVHeight()
{
	_control_status.flags.ev_hgt = true;

	_control_status.flags.baro_hgt = false;
	_control_status.flags.gps_hgt = false;
	_control_status.flags.rng_hgt = false;
}

void Ekf::stopMagFusion()
{
	stopMag3DFusion();
	stopMagHdgFusion();
	clearMagCov();
}

void Ekf::stopMag3DFusion()
{
	// save covariance data for re-use if currently doing 3-axis fusion
	if (_control_status.flags.mag_3D) {
		saveMagCovData();
		_control_status.flags.mag_3D = false;
	}
}

void Ekf::stopMagHdgFusion()
{
	_control_status.flags.mag_hdg = false;
}

void Ekf::startMagHdgFusion()
{
	stopMag3DFusion();
	_control_status.flags.mag_hdg = true;
}

void Ekf::startMag3DFusion()
{
	if (!_control_status.flags.mag_3D) {
		stopMagHdgFusion();
		zeroMagCov();
		loadMagCovData();
		_control_status.flags.mag_3D = true;
	}
}

void Ekf::startBaroHgtFusion()
{
	setControlBaroHeight();

	// We don't need to set a height sensor offset
	// since we track a separate _baro_hgt_offset
	_hgt_sensor_offset = 0.0f;

	// Turn off ground effect compensation if it times out
	if (_control_status.flags.gnd_effect) {
		if (isTimedOut(_time_last_gnd_effect_on, GNDEFFECT_TIMEOUT)) {

			_control_status.flags.gnd_effect = false;
		}
	}
}

void Ekf::startGpsHgtFusion()
{
	setControlGPSHeight();

	// we have just switched to using gps height, calculate height sensor offset such that current
	// measurement matches our current height estimate
	if (_control_status_prev.flags.gps_hgt != _control_status.flags.gps_hgt) {
		_hgt_sensor_offset = _gps_sample_delayed.hgt - _gps_alt_ref + _state.pos(2);
	}
}

void Ekf::updateBaroHgtOffset()
{
	// calculate a filtered offset between the baro origin and local NED origin if we are not
	// using the baro as a height reference
	if (!_control_status.flags.baro_hgt && _baro_data_ready) {
		const float local_time_step = math::constrain(1e-6f * _delta_time_baro_us, 0.0f, 1.0f);

		// apply a 10 second first order low pass filter to baro offset
		const float offset_rate_correction =  0.1f * (_baro_sample_delayed.hgt + _state.pos(2) -
								_baro_hgt_offset);
		_baro_hgt_offset += local_time_step * math::constrain(offset_rate_correction, -0.1f, 0.1f);
	}
}

Vector3f Ekf::getVisionVelocityInEkfFrame() const
{
	Vector3f vel;
	// correct velocity for offset relative to IMU
	const Vector3f pos_offset_body = _params.ev_pos_body - _params.imu_pos_body;
	const Vector3f vel_offset_body = _ang_rate_delayed_raw % pos_offset_body;

	// rotate measurement into correct earth frame if required
	switch(_ev_sample_delayed.vel_frame) {
		case BODY_FRAME_FRD:
			vel = _R_to_earth * (_ev_sample_delayed.vel - vel_offset_body);
			break;
		case LOCAL_FRAME_FRD:
			const Vector3f vel_offset_earth = _R_to_earth * vel_offset_body;
			if (_params.fusion_mode & MASK_ROTATE_EV)
			{
				vel = _R_ev_to_ekf *_ev_sample_delayed.vel - vel_offset_earth;
			} else {
				vel = _ev_sample_delayed.vel - vel_offset_earth;
			}
			break;
	}
	return vel;
}

Vector3f Ekf::getVisionVelocityVarianceInEkfFrame() const
{
	Matrix3f ev_vel_cov = _ev_sample_delayed.velCov;

	// rotate measurement into correct earth frame if required
	switch(_ev_sample_delayed.vel_frame) {
		case BODY_FRAME_FRD:
			ev_vel_cov = _R_to_earth * ev_vel_cov * _R_to_earth.transpose();
			break;

		case LOCAL_FRAME_FRD:
			if(_params.fusion_mode & MASK_ROTATE_EV)
			{
				ev_vel_cov = _R_ev_to_ekf * ev_vel_cov * _R_ev_to_ekf.transpose();
			}
			break;
	}
	return ev_vel_cov.diag();
}

// update the rotation matrix which rotates EV measurements into the EKF's navigation frame
void Ekf::calcExtVisRotMat()
{
	// Calculate the quaternion delta that rotates from the EV to the EKF reference frame at the EKF fusion time horizon.
	const Quatf q_error((_state.quat_nominal * _ev_sample_delayed.quat.inversed()).normalized());
	_R_ev_to_ekf = Dcmf(q_error);
}

// return the quaternions for the rotation from External Vision system reference frame to the EKF reference frame
matrix::Quatf Ekf::getVisionAlignmentQuaternion() const
{
	return Quatf(_R_ev_to_ekf);
}

// Increase the yaw error variance of the quaternions
// Argument is additional yaw variance in rad**2
void Ekf::increaseQuatYawErrVariance(float yaw_variance)
{
	// See DeriveYawResetEquations.m for derivation which produces code fragments in C_code4.txt file
	// The auto-code was cleaned up and had terms multiplied by zero removed to give the following:

	// Intermediate variables
	float SG[3];
	SG[0] = sq(_state.quat_nominal(0)) - sq(_state.quat_nominal(1)) - sq(_state.quat_nominal(2)) + sq(_state.quat_nominal(3));
	SG[1] = 2*_state.quat_nominal(0)*_state.quat_nominal(2) - 2*_state.quat_nominal(1)*_state.quat_nominal(3);
	SG[2] = 2*_state.quat_nominal(0)*_state.quat_nominal(1) + 2*_state.quat_nominal(2)*_state.quat_nominal(3);

	float SQ[4];
	SQ[0] = 0.5f * ((_state.quat_nominal(1)*SG[0]) - (_state.quat_nominal(0)*SG[2]) + (_state.quat_nominal(3)*SG[1]));
	SQ[1] = 0.5f * ((_state.quat_nominal(0)*SG[1]) - (_state.quat_nominal(2)*SG[0]) + (_state.quat_nominal(3)*SG[2]));
	SQ[2] = 0.5f * ((_state.quat_nominal(3)*SG[0]) - (_state.quat_nominal(1)*SG[1]) + (_state.quat_nominal(2)*SG[2]));
	SQ[3] = 0.5f * ((_state.quat_nominal(0)*SG[0]) + (_state.quat_nominal(1)*SG[2]) + (_state.quat_nominal(2)*SG[1]));

	// Limit yaw variance increase to prevent a badly conditioned covariance matrix
	yaw_variance = fminf(yaw_variance, 1.0e-2f);

	// Add covariances for additonal yaw uncertainty to existing covariances.
	// This assumes that the additional yaw error is uncorrrelated to existing errors
	P(0,0) += yaw_variance*sq(SQ[2]);
	P(0,1) += yaw_variance*SQ[1]*SQ[2];
	P(1,1) += yaw_variance*sq(SQ[1]);
	P(0,2) += yaw_variance*SQ[0]*SQ[2];
	P(1,2) += yaw_variance*SQ[0]*SQ[1];
	P(2,2) += yaw_variance*sq(SQ[0]);
	P(0,3) -= yaw_variance*SQ[2]*SQ[3];
	P(1,3) -= yaw_variance*SQ[1]*SQ[3];
	P(2,3) -= yaw_variance*SQ[0]*SQ[3];
	P(3,3) += yaw_variance*sq(SQ[3]);
	P(1,0) += yaw_variance*SQ[1]*SQ[2];
	P(2,0) += yaw_variance*SQ[0]*SQ[2];
	P(2,1) += yaw_variance*SQ[0]*SQ[1];
	P(3,0) -= yaw_variance*SQ[2]*SQ[3];
	P(3,1) -= yaw_variance*SQ[1]*SQ[3];
	P(3,2) -= yaw_variance*SQ[0]*SQ[3];
}

// save covariance data for re-use when auto-switching between heading and 3-axis fusion
void Ekf::saveMagCovData()
{
	// save variances for the D earth axis and XYZ body axis field
	for (uint8_t index = 0; index <= 3; index ++) {
		_saved_mag_bf_variance[index] = P(index + 18,index + 18);
	}

	// save the NE axis covariance sub-matrix
	_saved_mag_ef_covmat = P.slice<2, 2>(16, 16);
}

void Ekf::loadMagCovData()
{
	// re-instate variances for the D earth axis and XYZ body axis field
	for (uint8_t index = 0; index <= 3; index ++) {
		P(index + 18,index + 18) = _saved_mag_bf_variance[index];
	}
	// re-instate the NE axis covariance sub-matrix
	P.slice<2, 2>(16, 16) = _saved_mag_ef_covmat;
}

void Ekf::startGpsFusion()
{
	resetHorizontalPositionToGps();

	// when using optical flow,
	// velocity reset is not necessary
	if (!_control_status.flags.opt_flow) {
		resetVelocityToGps();
	}

	ECL_INFO_TIMESTAMPED("starting GPS fusion");
	_control_status.flags.gps = true;
}

void Ekf::stopGpsFusion()
{
	stopGpsPosFusion();
	stopGpsVelFusion();
	stopGpsYawFusion();
}

void Ekf::stopGpsPosFusion()
{
	_control_status.flags.gps = false;
	_control_status.flags.gps_hgt = false;
	_gps_pos_innov.setZero();
	_gps_pos_innov_var.setZero();
	_gps_pos_test_ratio.setZero();
}

void Ekf::stopGpsVelFusion()
{
	_gps_vel_innov.setZero();
	_gps_vel_innov_var.setZero();
	_gps_vel_test_ratio.setZero();
}

void Ekf::startGpsYawFusion()
{
	_control_status.flags.mag_dec = false;
	stopEvYawFusion();
	stopMagHdgFusion();
	stopMag3DFusion();
	_control_status.flags.gps_yaw = true;
}

void Ekf::stopGpsYawFusion()
{
	_control_status.flags.gps_yaw = false;
}

void Ekf::startEvPosFusion() {
	_control_status.flags.ev_pos = true;
	resetHorizontalPosition();
	ECL_INFO_TIMESTAMPED("starting vision pos fusion");
}

void Ekf::startEvVelFusion() {
	_control_status.flags.ev_vel = true;
	resetVelocity();
	ECL_INFO_TIMESTAMPED("starting vision vel fusion");
}

void Ekf::startEvYawFusion() {
	// reset the yaw angle to the value from the vision quaternion
	const Eulerf euler_obs(_ev_sample_delayed.quat);
	const float yaw = euler_obs(2);
	const float yaw_variance = fmaxf(_ev_sample_delayed.angVar, sq(1.0e-2f));

	resetQuatStateYaw(yaw, yaw_variance, true);

	// flag the yaw as aligned
	_control_status.flags.yaw_align = true;

	// turn on fusion of external vision yaw measurements and disable all magnetometer fusion
	_control_status.flags.ev_yaw = true;
	_control_status.flags.mag_dec = false;

	stopMagHdgFusion();
	stopMag3DFusion();

	ECL_INFO_TIMESTAMPED("starting vision yaw fusion");
}

void Ekf::stopEvFusion()
{
	stopEvPosFusion();
	stopEvVelFusion();
	stopEvYawFusion();
}

void Ekf::stopEvPosFusion()
{
	_control_status.flags.ev_pos = false;
	_ev_pos_innov.setZero();
	_ev_pos_innov_var.setZero();
	_ev_pos_test_ratio.setZero();
}

void Ekf::stopEvVelFusion()
{
	_control_status.flags.ev_vel = false;
	_ev_vel_innov.setZero();
	_ev_vel_innov_var.setZero();
	_ev_vel_test_ratio.setZero();
}

void Ekf::stopEvYawFusion()
{
	_control_status.flags.ev_yaw = false;
}

void Ekf::stopAuxVelFusion()
{
	_aux_vel_innov.setZero();
	_aux_vel_innov_var.setZero();
	_aux_vel_test_ratio.setZero();
}

void Ekf::stopFlowFusion()
{
	_control_status.flags.opt_flow = false;
	_flow_innov.setZero();
	_flow_innov_var.setZero();
	_optflow_test_ratio = 0.0f;
}

void Ekf::resetQuatStateYaw(float yaw, float yaw_variance, bool update_buffer)
{
	// save a copy of the quaternion state for later use in calculating the amount of reset change
	const Quatf quat_before_reset = _state.quat_nominal;

	// update transformation matrix from body to world frame using the current estimate
	_R_to_earth = Dcmf(_state.quat_nominal);

	// update the rotation matrix using the new yaw value
	// determine if a 321 or 312 Euler sequence is best
	if (fabsf(_R_to_earth(2, 0)) < fabsf(_R_to_earth(2, 1))) {
		// use a 321 sequence
		Eulerf euler321(_R_to_earth);
		euler321(2) = yaw;
		_R_to_earth = Dcmf(euler321);

	} else {
		// Calculate the 312 Tait-Bryan rotation sequence that rotates from earth to body frame
		// We use a 312 sequence as an alternate when there is more pitch tilt than roll tilt
		// to avoid gimbal lock
		const Vector3f rot312(yaw,
				      asinf(_R_to_earth(2, 1)),
				      atan2f(-_R_to_earth(2, 0), _R_to_earth(2, 2)));
		_R_to_earth = taitBryan312ToRotMat(rot312);

	}

	// calculate the amount that the quaternion has changed by
	const Quatf quat_after_reset(_R_to_earth);
	const Quatf q_error((quat_after_reset * quat_before_reset.inversed()).normalized());

	// update quaternion states
	_state.quat_nominal = quat_after_reset;
	uncorrelateQuatFromOtherStates();

	// record the state change
	_state_reset_status.quat_change = q_error;

	// update the yaw angle variance
	if (yaw_variance > FLT_EPSILON) {
		increaseQuatYawErrVariance(yaw_variance);
	}

	// add the reset amount to the output observer buffered data
	if (update_buffer) {
		for (uint8_t i = 0; i < _output_buffer.get_length(); i++) {
			_output_buffer[i].quat_nominal = _state_reset_status.quat_change * _output_buffer[i].quat_nominal;
		}

		// apply the change in attitude quaternion to our newest quaternion estimate
		// which was already taken out from the output buffer
		_output_new.quat_nominal = _state_reset_status.quat_change * _output_new.quat_nominal;

	}

	// capture the reset event
	_state_reset_status.quat_counter++;
}

// Resets the main Nav EKf yaw to the estimator from the EKF-GSF yaw estimator
// Resets the horizontal velocity and position to the default navigation sensor
// Returns true if the reset was successful
bool Ekf::resetYawToEKFGSF()
{
	// don't allow reet using the EKF-GSF estimate until the filter has started fusing velocity
	// data and the yaw estimate has converged
	float new_yaw, new_yaw_variance;

	if (!yawEstimator.getYawData(&new_yaw, &new_yaw_variance)) {
		return false;
	}

	const bool has_converged = new_yaw_variance < sq(_params.EKFGSF_yaw_err_max);

	if (!has_converged) {
		return false;
	}

	resetQuatStateYaw(new_yaw, new_yaw_variance, true);

	// reset velocity and position states to GPS - if yaw is fixed then the filter should start to operate correctly
	resetVelocity();
	resetHorizontalPosition();

	// record a magnetic field alignment event to prevent possibility of the EKF trying to reset the yaw to the mag later in flight
	_flt_mag_align_start_time = _imu_sample_delayed.time_us;
	_control_status.flags.yaw_align = true;

	if (_params.mag_fusion_type == MAG_FUSE_TYPE_NONE) {
		ECL_INFO_TIMESTAMPED("Yaw aligned using IMU and GPS");
	} else {
		// stop using the magnetometer in the main EKF otherwise it's fusion could drag the yaw around
		// and cause another navigation failure
		_control_status.flags.mag_fault = true;
		ECL_INFO_TIMESTAMPED("Emergency yaw reset - mag use stopped");
	}

	return true;
}

void Ekf::requestEmergencyNavReset()
{
	_do_ekfgsf_yaw_reset = true;
}

bool Ekf::getDataEKFGSF(float *yaw_composite, float *yaw_variance, float yaw[N_MODELS_EKFGSF], float innov_VN[N_MODELS_EKFGSF], float innov_VE[N_MODELS_EKFGSF], float weight[N_MODELS_EKFGSF])
{
	return yawEstimator.getLogData(yaw_composite,yaw_variance,yaw,innov_VN,innov_VE,weight);
}

void Ekf::runYawEKFGSF()
{
	float TAS;
	if (isTimedOut(_airspeed_sample_delayed.time_us, 1000000) && _control_status.flags.fixed_wing) {
		TAS = _params.EKFGSF_tas_default;
	} else {
		TAS = _airspeed_sample_delayed.true_airspeed;
	}

	const Vector3f imu_gyro_bias = getGyroBias();
	yawEstimator.update(_imu_sample_delayed, _control_status.flags.in_air, TAS, imu_gyro_bias);

	// basic sanity check on GPS velocity data
	if (_gps_data_ready && _gps_sample_delayed.vacc > FLT_EPSILON &&
	    ISFINITE(_gps_sample_delayed.vel(0)) && ISFINITE(_gps_sample_delayed.vel(1))) {
		yawEstimator.setVelocity(_gps_sample_delayed.vel.xy(), _gps_sample_delayed.vacc);
	}
}

void Ekf::resetGpsDriftCheckFilters()
{
	_gps_velNE_filt.setZero();
	_gps_pos_deriv_filt.setZero();
}