#!/bin/sh
#
# Fixed wing default parameters
#
# NOTE: Script variables are declared/initialized/unset in the rcS script.
#

set VEHICLE_TYPE fw

if [ $AUTOCNF = yes ]
then
	#
	# Default parameters for fixed wing UAVs.
	#
	param set COM_POS_FS_DELAY 5
	param set COM_POS_FS_EPH 25
	param set COM_POS_FS_EPV 50
	param set COM_POS_FS_GAIN 0
	param set COM_POS_FS_PROB 1
	param set COM_VEL_FS_EVH 5

	param set EKF2_ARSP_THR 8
	param set EKF2_FUSE_BETA 1
	param set EKF2_GPS_CHECK 21
	param set EKF2_MAG_ACCLIM 0
	param set EKF2_MAG_YAWLIM 0
	param set EKF2_REQ_EPH 10
	param set EKF2_REQ_EPV 10
	param set EKF2_REQ_HDRIFT 0.5
	param set EKF2_REQ_SACC 1
	param set EKF2_REQ_VDRIFT 1.0

	param set RTL_RETURN_ALT 100
	param set RTL_DESCEND_ALT 100
	param set RTL_LAND_DELAY -1

	#
	# FW uses L1 distance for acceptance radius.
	# Set a smaller NAV_ACC_RAD for vertical acceptance distance.
	#
	param set NAV_ACC_RAD 10

	param set MIS_LTRMIN_ALT 25
	param set MIS_TAKEOFF_ALT 25

	param set PWM_RATE 50

	#
	# FW takeoff acceleration can easily exceed ublox GPS 2G default.
	#
	param set GPS_UBX_DYNMODEL 8
fi

#
# This is the gimbal pass mixer.
#
set MIXER_AUX pass

set PWM_AUX_RATE 50
set PWM_AUX_OUT 1234