You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Branch: release/1.12

main

master

my1.12

my1.12-iic

pr-sensor-distance

release/1.12

sbg

tf-1.12

tf-1.12-print_test

tf-iic2uart

tf_driver-1.12

tf_i2c-1.12

tf_i2c_collis_pre

v1.13.0-BW

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'release/1.12'

${ noResults }

px4_autopilot/boards/mro/ctrl-zero-h7-oem

History

Lorenz Meier 15e6ca9e1e MRO: Set up MPU after boot to app ... This is needed in case the bootloader configured the MPU, which could interfere with the app as the bootloader memory map / configuration is different.		3 years ago
..
init	boards: minimize unnecessary differences in default variants	4 years ago
nuttx-config	boards: enable CONFIG_OTG_ID_GPIO_DISABLE on all F7/H7	4 years ago
src	MRO: Set up MPU after boot to app	3 years ago
bootloader.cmake	boards: MRO Control Zero H7 OEM Board Support	4 years ago
default.cmake	Adding BatMon smart battery as a module and refactoring SMBUS based SBS 1.1 spec to a library	4 years ago
firmware.prototype	boards: MRO Control Zero H7 OEM Board Support	4 years ago