You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
216 lines
8.0 KiB
216 lines
8.0 KiB
/**************************************************************************** |
|
* configs/pic32mx7mmb/include/board.h |
|
* include/arch/board/board.h |
|
* |
|
* Copyright (C) 2012 Gregory Nutt. All rights reserved. |
|
* Author: Gregory Nutt <gnutt@nuttx.org> |
|
* |
|
* Redistribution and use in source and binary forms, with or without |
|
* modification, are permitted provided that the following conditions |
|
* are met: |
|
* |
|
* 1. Redistributions of source code must retain the above copyright |
|
* notice, this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright |
|
* notice, this list of conditions and the following disclaimer in |
|
* the documentation and/or other materials provided with the |
|
* distribution. |
|
* 3. Neither the name NuttX nor the names of its contributors may be |
|
* used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
|
* POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************/ |
|
|
|
#ifndef __CONFIGS_MIKROELEKTRONIKA_PIC32MX7MMB_INCLUDE_BOARD_H |
|
#define __CONFIGS_MIKROELEKTRONIKA_PIC32MX7MMB_INCLUDE_BOARD_H |
|
|
|
/**************************************************************************** |
|
* Included Files |
|
****************************************************************************/ |
|
|
|
#include <nuttx/config.h> |
|
|
|
#ifndef __ASSEMBLY__ |
|
# include <stdbool.h> |
|
#endif |
|
|
|
/**************************************************************************** |
|
* Pre-Processor Definitions |
|
****************************************************************************/ |
|
/* Configuration ************************************************************/ |
|
|
|
/* Clocking *****************************************************************/ |
|
/* Crystal frequencies */ |
|
|
|
#define BOARD_POSC_FREQ 8000000 /* Primary OSC XTAL frequency (8MHz) */ |
|
#define BOARD_SOSC_FREQ 32768 /* Secondary OSC XTAL frequency (32.768KHz) */ |
|
|
|
/* PLL configuration and resulting CPU clock. |
|
* CPU_CLOCK = ((POSC_FREQ / IDIV) * MULT) / ODIV |
|
*/ |
|
|
|
#define BOARD_PLL_IDIV 2 /* PLL input divider */ |
|
#define BOARD_PLL_MULT 20 /* PLL multiplier */ |
|
#define BOARD_PLL_ODIV 1 /* PLL output divider */ |
|
|
|
#define BOARD_CPU_CLOCK 80000000 /* CPU clock (80MHz = 8MHz * 20 / 2) */ |
|
|
|
/* USB PLL configuration. |
|
* USB_CLOCK = ((POSC_XTAL / IDIV) * 24) / 2 |
|
*/ |
|
|
|
#define BOARD_UPLL_IDIV 2 /* USB PLL divider (revisit) */ |
|
#define BOARD_USB_CLOCK 48000000 /* USB clock (8MHz / 2) * 24 / 2) */ |
|
|
|
/* Peripheral clock is divided down from CPU clock. |
|
* PBCLOCK = CPU_CLOCK / PBDIV |
|
*/ |
|
|
|
#define BOARD_PBDIV 2 /* Peripheral clock divisor (PBDIV) */ |
|
#define BOARD_PBCLOCK 40000000 /* Peripheral clock (PBCLK = 80MHz/2) */ |
|
|
|
/* Watchdog pre-scaler (re-visit) */ |
|
|
|
#define BOARD_WD_ENABLE 0 /* Watchdog is disabled */ |
|
#define BOARD_WD_PRESCALER 8 /* Watchdog pre-scaler */ |
|
|
|
/* Ethernet MII clocking. |
|
* |
|
* The clock divider used to create the MII Management Clock (MDC). The MIIM |
|
* module uses the SYSCLK as an input clock. According to the IEEE 802.3 |
|
* Specification this should be no faster than 2.5 MHz. However, some PHYs |
|
* support clock rates up to 12.5 MHz. |
|
*/ |
|
|
|
#define BOARD_EMAC_MIIM_DIV 32 /* Ideal: 80MHz/32 = 2.5MHz */ |
|
|
|
/* LED definitions **********************************************************/ |
|
/* LED Configuration ********************************************************/ |
|
/* The Mikroelektronika PIC32MX7 MMB has 3 user LEDs labeled LED0-2 in the |
|
* schematics: |
|
* |
|
* PIN Board Notes |
|
* --- ----- -------------------------------- |
|
* RA0 LED0 Pulled-up, low value illuminates |
|
* RA1 LED1 Pulled-up, low value illuminates |
|
* RD9 LED2 Pulled-up, low value illuminates |
|
*/ |
|
|
|
/* LED index values for use with pic32mx_setled() */ |
|
|
|
#define PIC32MX_PIC32MX7MMB_LED0 0 |
|
#define PIC32MX_PIC32MX7MMB_LED1 1 |
|
#define PIC32MX_PIC32MX7MMB_LED2 2 |
|
#define PIC32MX_PIC32MX7MMB_NLEDS 3 |
|
|
|
/* LED bits for use with pic32mx_setleds() */ |
|
|
|
#define PIC32MX_PIC32MX7MMB_LED0_BIT (1 << PIC32MX_PIC32MX7MMB_LED0) |
|
#define PIC32MX_PIC32MX7MMB_LED1_BIT (1 << PIC32MX_PIC32MX7MMB_LED2) |
|
#define PIC32MX_PIC32MX7MMB_LED2_BIT (1 << PIC32MX_PIC32MX7MMB_LED3) |
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs |
|
* on board the Mikroelektronika PIC32MX7 MMB. The following definitions |
|
* describe how NuttX controls the LEDs: |
|
* |
|
* ON OFF |
|
* ------------------------- ---- ---- ---- ---- ---- ---- |
|
* LED0 LED1 LED2 LED0 LED1 LED2 |
|
* ------------------------- ---- ---- ---- ---- ---- ---- |
|
* LED_STARTED 0 OFF OFF OFF --- --- --- |
|
* LED_HEAPALLOCATE 1 ON OFF N/C --- --- --- |
|
* LED_IRQSENABLED 2 OFF ON N/C --- --- --- |
|
* LED_STACKCREATED 3 ON ON N/C --- --- --- |
|
* LED_INIRQ 4 N/C N/C ON N/C N/C OFF |
|
* LED_SIGNAL 4 N/C N/C ON N/C N/C OFF |
|
* LED_ASSERTION 4 N/C N/C ON N/C N/C OFF |
|
* LED_PANIC 5 ON N/C N/C OFF N/C N/C |
|
*/ |
|
|
|
#define LED_STARTED 0 |
|
#define LED_HEAPALLOCATE 1 |
|
#define LED_IRQSENABLED 2 |
|
#define LED_STACKCREATED 3 |
|
#define LED_INIRQ 4 |
|
#define LED_SIGNAL 4 |
|
#define LED_ASSERTION 4 |
|
#define LED_PANIC 5 |
|
|
|
#define LED_NVALUES 6 |
|
|
|
/* Switch definitions *******************************************************/ |
|
/* The Mikroelektronika PIC32MX7 MMB has a joystick: |
|
* |
|
* ------ -------- -------------------------- |
|
* GPIO SIGNAL BOARD CONNECTION |
|
* ------ -------- -------------------------- |
|
* RB0 JOY-A Joystick A, HDR1 pin 24 |
|
* RB2 JOY-C Joystick C, HDR1 pin 22 |
|
* RB1 JOY-B Joystick B, HDR1 pin 23 |
|
* RB3 JOY-D Joystick D, HDR1 pin 21 |
|
* RA10 JOY-CP Joystick CP, HDR1 pin 25 |
|
*/ |
|
|
|
/**************************************************************************** |
|
* Public Types |
|
****************************************************************************/ |
|
|
|
#ifndef __ASSEMBLY__ |
|
|
|
/**************************************************************************** |
|
* Inline Functions |
|
****************************************************************************/ |
|
|
|
/**************************************************************************** |
|
* Public Function Prototypes |
|
****************************************************************************/ |
|
|
|
#ifdef __cplusplus |
|
#define EXTERN extern "C" |
|
extern "C" { |
|
#else |
|
#define EXTERN extern |
|
#endif |
|
|
|
/**************************************************************************** |
|
* Name: pic32mx_ledinit and pic32mx_setled |
|
* |
|
* Description: |
|
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board |
|
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces |
|
* are available to control the LEDs from user applicaitons. |
|
* |
|
****************************************************************************/ |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_ledinit(void); |
|
#endif |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_setled(int led, bool ledon); |
|
#endif |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_setleds(uint8_t ledset); |
|
#endif |
|
|
|
#undef EXTERN |
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
#endif /* __ASSEMBLY__ */ |
|
#endif /* __CONFIGS_MIKROELEKTRONIKA_PIC32MX7MMB_INCLUDE_BOARD_H */
|
|
|