You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
954 lines
34 KiB
954 lines
34 KiB
############################################################################ |
|
# configs/stm3210e-eval/buttons/defconfig |
|
# |
|
# Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved. |
|
# Author: Gregory Nutt <gnutt@nuttx.org> |
|
# |
|
# Redistribution and use in source and binary forms, with or without |
|
# modification, are permitted provided that the following conditions |
|
# are met: |
|
# |
|
# 1. Redistributions of source code must retain the above copyright |
|
# notice, this list of conditions and the following disclaimer. |
|
# 2. Redistributions in binary form must reproduce the above copyright |
|
# notice, this list of conditions and the following disclaimer in |
|
# the documentation and/or other materials provided with the |
|
# distribution. |
|
# 3. Neither the name NuttX nor the names of its contributors may be |
|
# used to endorse or promote products derived from this software |
|
# without specific prior written permission. |
|
# |
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
|
# POSSIBILITY OF SUCH DAMAGE. |
|
# |
|
############################################################################ |
|
# |
|
# architecture selection |
|
# |
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the |
|
# processor architecture. |
|
# CONFIG_ARCH_family - for use in C code. This identifies the |
|
# particular chip family that the architecture is implemented |
|
# in. |
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the |
|
# specific architecture within the chip familyl. |
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory |
|
# CONFIG_ARCH_CHIP_name - For use in C code |
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, |
|
# the board that supports the particular chip or SoC. |
|
# CONFIG_ARCH_BOARD_name - for use in C code |
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) |
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops |
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM. |
|
# CONFIG_DRAM_START - The start address of DRAM (physical) |
|
# CONFIG_DRAM_END - Last address+1 of installed RAM |
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization |
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt |
|
# stack. If defined, this symbol is the size of the interrupt |
|
# stack in bytes. If not defined, the user task stacks will be |
|
# used during interrupt handling. |
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions |
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader. |
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. |
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture. |
|
# CONFIG_ARCH_IRQBUTTONS - Must be defined for interrupting button support |
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that |
|
# cause a 100 second delay during boot-up. This 100 second delay |
|
# serves no purpose other than it allows you to calibrate |
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure |
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until |
|
# the delay actually is 100 seconds. |
|
# CONFIG_ARCH_DMA - Support DMA initialization |
|
# |
|
CONFIG_ARCH=arm |
|
CONFIG_ARCH_ARM=y |
|
CONFIG_ARCH_CORTEXM3=y |
|
CONFIG_ARCH_CHIP=stm32 |
|
CONFIG_ARCH_CHIP_STM32F103ZET6=y |
|
CONFIG_ARCH_BOARD=stm3210e-eval |
|
CONFIG_ARCH_BOARD_STM3210E_EVAL=y |
|
CONFIG_BOARD_LOOPSPERMSEC=5483 |
|
CONFIG_DRAM_SIZE=0x00010000 |
|
CONFIG_DRAM_START=0x20000000 |
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) |
|
CONFIG_ARCH_IRQPRIO=y |
|
CONFIG_ARCH_INTERRUPTSTACK=n |
|
CONFIG_ARCH_STACKDUMP=y |
|
CONFIG_ARCH_BOOTLOADER=n |
|
CONFIG_ARCH_LEDS=y |
|
CONFIG_ARCH_BUTTONS=y |
|
CONFIG_ARCH_IRQBUTTONS=y |
|
CONFIG_ARCH_CALIBRATION=n |
|
CONFIG_ARCH_DMA=n |
|
|
|
# |
|
# Identify toolchain and linker options |
|
# |
|
CONFIG_STM32_CODESOURCERYW=y |
|
CONFIG_STM32_CODESOURCERYL=n |
|
CONFIG_STM32_DEVKITARM=n |
|
CONFIG_STM32_RAISONANCE=n |
|
CONFIG_STM32_BUILDROOT=n |
|
|
|
# |
|
# JTAG Enable settings (by default JTAG-DP and SW-DP are disabled): |
|
# |
|
# CONFIG_STM32_DFU - Use the DFU bootloader, not JTAG |
|
# |
|
# JTAG Enable options: |
|
# |
|
# CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) |
|
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP) |
|
# but without JNTRST. |
|
# CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled |
|
# |
|
CONFIG_STM32_DFU=y |
|
CONFIG_STM32_JTAG_FULL_ENABLE=y |
|
CONFIG_STM32_JTAG_NOJNTRST_ENABLE=n |
|
CONFIG_STM32_JTAG_SW_ENABLE=n |
|
|
|
# |
|
# Individual subsystems can be enabled: |
|
# |
|
# Individual subsystems can be enabled: |
|
# AHB: |
|
CONFIG_STM32_DMA1=n |
|
CONFIG_STM32_DMA2=n |
|
CONFIG_STM32_CRC=n |
|
CONFIG_STM32_FSMC=y |
|
CONFIG_STM32_SDIO=n |
|
# APB1: |
|
CONFIG_STM32_TIM2=n |
|
CONFIG_STM32_TIM3=n |
|
CONFIG_STM32_TIM4=n |
|
CONFIG_STM32_TIM5=n |
|
CONFIG_STM32_TIM6=n |
|
CONFIG_STM32_TIM7=n |
|
CONFIG_STM32_WWDG=n |
|
CONFIG_STM32_IWDG=n |
|
CONFIG_STM32_SPI2=n |
|
CONFIG_STM32_SPI4=n |
|
CONFIG_STM32_USART2=y |
|
CONFIG_STM32_USART3=n |
|
CONFIG_STM32_UART4=n |
|
CONFIG_STM32_UART5=n |
|
CONFIG_STM32_I2C1=n |
|
CONFIG_STM32_I2C2=n |
|
CONFIG_STM32_USB=y |
|
CONFIG_STM32_CAN1=n |
|
CONFIG_STM32_BKP=n |
|
CONFIG_STM32_PWR=n |
|
CONFIG_STM32_DAC=n |
|
# APB2: |
|
CONFIG_STM32_ADC1=n |
|
CONFIG_STM32_ADC2=n |
|
CONFIG_STM32_TIM1=n |
|
CONFIG_STM32_SPI1=n |
|
CONFIG_STM32_TIM8=n |
|
CONFIG_STM32_USART1=y |
|
CONFIG_STM32_ADC3=n |
|
|
|
# |
|
# Timer and I2C devices may need to the following to force power to be applied: |
|
# |
|
#CONFIG_STM32_FORCEPOWER=y |
|
|
|
# |
|
# STM32F103Z specific serial device driver settings |
|
# |
|
# CONFIG_USARTn_SERIAL_CONSOLE - selects the USARTn for the |
|
# console and ttys0 (default is the USART1). |
|
# CONFIG_USARTn_RXBUFSIZE - Characters are buffered as received. |
|
# This specific the size of the receive buffer |
|
# CONFIG_USARTn_TXBUFSIZE - Characters are buffered before |
|
# being sent. This specific the size of the transmit buffer |
|
# CONFIG_USARTn_BAUD - The configure BAUD of the UART. Must be |
|
# CONFIG_USARTn_BITS - The number of bits. Must be either 7 or 8. |
|
# CONFIG_USARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity |
|
# CONFIG_USARTn_2STOP - Two stop bits |
|
# |
|
CONFIG_USART1_SERIAL_CONSOLE=y |
|
CONFIG_USART2_SERIAL_CONSOLE=n |
|
CONFIG_USART3_SERIAL_CONSOLE=n |
|
CONFIG_USART4_SERIAL_CONSOLE=n |
|
CONFIG_USART5_SERIAL_CONSOLE=n |
|
|
|
CONFIG_USART1_TXBUFSIZE=256 |
|
CONFIG_USART2_TXBUFSIZE=256 |
|
CONFIG_USART3_TXBUFSIZE=256 |
|
CONFIG_USART4_TXBUFSIZE=256 |
|
CONFIG_USART5_TXBUFSIZE=256 |
|
|
|
CONFIG_USART1_RXBUFSIZE=256 |
|
CONFIG_USART2_RXBUFSIZE=256 |
|
CONFIG_USART3_RXBUFSIZE=256 |
|
CONFIG_USART4_RXBUFSIZE=256 |
|
CONFIG_USART5_RXBUFSIZE=256 |
|
|
|
CONFIG_USART1_BAUD=115200 |
|
CONFIG_USART2_BAUD=115200 |
|
CONFIG_USART3_BAUD=115200 |
|
CONFIG_USART4_BAUD=115200 |
|
CONFIG_USART5_BAUD=115200 |
|
|
|
CONFIG_USART1_BITS=8 |
|
CONFIG_USART2_BITS=8 |
|
CONFIG_USART3_BITS=8 |
|
CONFIG_USART4_BITS=8 |
|
CONFIG_USART5_BITS=8 |
|
|
|
CONFIG_USART1_PARITY=0 |
|
CONFIG_USART2_PARITY=0 |
|
CONFIG_USART3_PARITY=0 |
|
CONFIG_USART4_PARITY=0 |
|
CONFIG_USART5_PARITY=0 |
|
|
|
CONFIG_USART1_2STOP=0 |
|
CONFIG_USART2_2STOP=0 |
|
CONFIG_USART3_2STOP=0 |
|
CONFIG_USART4_2STOP=0 |
|
CONFIG_USART5_2STOP=0 |
|
|
|
# |
|
# STM32F103Z specific SSI device driver settings |
|
# |
|
# CONFIG_SSIn_DISABLE - select to disable all support for |
|
# the SSI |
|
# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support |
|
# Poll-waiting is recommended if the interrupt rate would be to |
|
# high in the interrupt driven case. |
|
# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before |
|
# emptying the Rx FIFO. If the SPI frequency is high and this |
|
# value is large, then larger values of this setting may cause |
|
# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). |
|
# |
|
CONFIG_SSI0_DISABLE=y |
|
CONFIG_SSI1_DISABLE=y |
|
CONFIG_SSI_POLLWAIT=y |
|
#CONFIG_SSI_TXLIMIT=4 |
|
|
|
# |
|
# STM3210E-EVAL specific LCD settings |
|
# |
|
CONFIG_STM32_AM240320_DISABLE=n |
|
CONFIG_STM32_SPFD5408B_DISABLE=n |
|
CONFIG_STM32_R61580_DISABLE=y |
|
|
|
# |
|
# General build options |
|
# |
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with |
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script |
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format |
|
# used with many different loaders using the GNU objcopy program |
|
# Should not be selected if you are not using the GNU toolchain. |
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format |
|
# used with many different loaders using the GNU objcopy program |
|
# Should not be selected if you are not using the GNU toolchain. |
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many |
|
# different loaders using the GNU objcopy program. This option |
|
# should not be selected if you are not using the GNU toolchain. |
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a |
|
# |
|
CONFIG_RRLOAD_BINARY=n |
|
CONFIG_INTELHEX_BINARY=y |
|
CONFIG_MOTOROLA_SREC=n |
|
CONFIG_RAW_BINARY=n |
|
CONFIG_HAVE_LIBM=n |
|
|
|
# |
|
# General OS setup |
|
# |
|
# CONFIG_APPS_DIR - Identifies the relative path to the directory |
|
# that builds the application to link with NuttX. Default: ../apps |
|
# CONFIG_DEBUG - enables built-in debug options |
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output |
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with |
|
# debug symbols (needed for use with a debugger). |
|
# CONFIG_HAVE_CXX - Enable support for C++ |
|
# CONFIG_HAVE_CXXINITIALIZE - The platform-specific logic includes support |
|
# for initialization of static C++ instances for this architecture |
|
# and for the selected toolchain (via up_cxxinitialize()). |
|
# CONFIG_MM_REGIONS - If the architecture includes multiple |
|
# regions of memory to allocate from, this specifies the |
|
# number of memory regions that the memory manager must |
|
# handle and enables the API mm_addregion(start, end); |
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot |
|
# time console output |
|
# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz |
|
# or MSEC_PER_TICK=10. This setting may be defined to |
|
# inform NuttX that the processor hardware is providing |
|
# system timer interrupts at some interrupt interval other |
|
# than 10 msec. |
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set |
|
# this number of milliseconds; Round robin scheduling can |
|
# be disabled by setting this value to zero. |
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in |
|
# scheduler to monitor system performance |
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a |
|
# task name to save in the TCB. Useful if scheduler |
|
# instrumentation is selected. Set to zero to disable. |
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - |
|
# Used to initialize the internal time logic. |
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions. |
|
# You would only need this if you are concerned about accurate |
|
# time conversions in the past or in the distant future. |
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You |
|
# would only need this if you are concerned about accurate |
|
# time conversion in the distand past. You must also define |
|
# CONFIG_GREGORIAN_TIME in order to use Julian time. |
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic |
|
# provides /dev/console. Enables stdout, stderr, stdin. |
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console |
|
# driver (minimul support) |
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and |
|
# errorcheck mutexes. Enables pthread_mutexattr_settype(). |
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority |
|
# inheritance on mutexes and semaphores. |
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority |
|
# inheritance is enabled. It defines the maximum number of |
|
# different threads (minus one) that can take counts on a |
|
# semaphore with priority inheritance support. This may be |
|
# set to zero if priority inheritance is disabled OR if you |
|
# are only using semaphores as mutexes (only one holder) OR |
|
# if no more than two threads participate using a counting |
|
# semaphore. |
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, |
|
# then this setting is the maximum number of higher priority |
|
# threads (minus 1) than can be waiting for another thread |
|
# to release a count on a semaphore. This value may be set |
|
# to zero if no more than one thread is expected to wait for |
|
# a semaphore. |
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors |
|
# by task_create() when a new task is started. If set, all |
|
# files/drivers will appear to be closed in the new task. |
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first |
|
# three file descriptors (stdin, stdout, stderr) by task_create() |
|
# when a new task is started. If set, all files/drivers will |
|
# appear to be closed in the new task except for stdin, stdout, |
|
# and stderr. |
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket |
|
# desciptors by task_create() when a new task is started. If |
|
# set, all sockets will appear to be closed in the new task. |
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. |
|
# This format will support execution of NuttX binaries located |
|
# in a ROMFS filesystem (see examples/nxflat). |
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to |
|
# handle delayed processing from interrupt handlers. This feature |
|
# is required for some drivers but, if there are not complaints, |
|
# can be safely disabled. The worker thread also performs |
|
# garbage collection -- completing any delayed memory deallocations |
|
# from interrupt handlers. If the worker thread is disabled, |
|
# then that clean will be performed by the IDLE thread instead |
|
# (which runs at the lowest of priority and may not be appropriate |
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE |
|
# is enabled, then the following options can also be used: |
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker |
|
# thread. Default: 50 |
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for |
|
# work in units of microseconds. Default: 50*1000 (50 MS). |
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker |
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE. |
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up |
|
# the worker thread. Default: 4 |
|
# |
|
#CONFIG_APPS_DIR= |
|
CONFIG_DEBUG=n |
|
CONFIG_DEBUG_VERBOSE=n |
|
CONFIG_DEBUG_SYMBOLS=n |
|
CONFIG_HAVE_CXX=n |
|
CONFIG_HAVE_CXXINITIALIZE=n |
|
CONFIG_MM_REGIONS=1 |
|
CONFIG_ARCH_LOWPUTC=y |
|
CONFIG_RR_INTERVAL=200 |
|
CONFIG_SCHED_INSTRUMENTATION=n |
|
CONFIG_TASK_NAME_SIZE=0 |
|
CONFIG_START_YEAR=2011 |
|
CONFIG_START_MONTH=7 |
|
CONFIG_START_DAY=7 |
|
CONFIG_GREGORIAN_TIME=n |
|
CONFIG_JULIAN_TIME=n |
|
CONFIG_DEV_CONSOLE=y |
|
CONFIG_DEV_LOWCONSOLE=y |
|
CONFIG_MUTEX_TYPES=n |
|
CONFIG_PRIORITY_INHERITANCE=n |
|
CONFIG_SEM_PREALLOCHOLDERS=0 |
|
CONFIG_SEM_NNESTPRIO=0 |
|
CONFIG_FDCLONE_DISABLE=n |
|
CONFIG_FDCLONE_STDIO=n |
|
CONFIG_SDCLONE_DISABLE=y |
|
CONFIG_NXFLAT=n |
|
CONFIG_SCHED_WORKQUEUE=n |
|
CONFIG_SCHED_WORKPRIORITY=50 |
|
CONFIG_SCHED_WORKPERIOD=(50*1000) |
|
CONFIG_SCHED_WORKSTACKSIZE=1024 |
|
CONFIG_SIG_SIGWORK=4 |
|
|
|
# |
|
# The following can be used to disable categories of |
|
# APIs supported by the OS. If the compiler supports |
|
# weak functions, then it should not be necessary to |
|
# disable functions unless you want to restrict usage |
|
# of those APIs. |
|
# |
|
# There are certain dependency relationships in these |
|
# features. |
|
# |
|
# o mq_notify logic depends on signals to awaken tasks |
|
# waiting for queues to become full or empty. |
|
# o pthread_condtimedwait() depends on signals to wake |
|
# up waiting tasks. |
|
# |
|
CONFIG_DISABLE_CLOCK=n |
|
CONFIG_DISABLE_POSIX_TIMERS=y |
|
CONFIG_DISABLE_PTHREAD=y |
|
CONFIG_DISABLE_SIGNALS=n |
|
CONFIG_DISABLE_MQUEUE=y |
|
CONFIG_DISABLE_MOUNTPOINT=y |
|
CONFIG_DISABLE_ENVIRON=y |
|
CONFIG_DISABLE_POLL=y |
|
|
|
# |
|
# Misc libc settings |
|
# |
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a |
|
# little smaller if we do not support fieldwidthes |
|
# |
|
CONFIG_NOPRINTF_FIELDWIDTH=n |
|
|
|
# |
|
# Allow for architecture optimized implementations |
|
# |
|
# The architecture can provide optimized versions of the |
|
# following to improve system performance |
|
# |
|
CONFIG_ARCH_MEMCPY=n |
|
CONFIG_ARCH_MEMCMP=n |
|
CONFIG_ARCH_MEMMOVE=n |
|
CONFIG_ARCH_MEMSET=n |
|
CONFIG_ARCH_STRCMP=n |
|
CONFIG_ARCH_STRCPY=n |
|
CONFIG_ARCH_STRNCPY=n |
|
CONFIG_ARCH_STRLEN=n |
|
CONFIG_ARCH_STRNLEN=n |
|
CONFIG_ARCH_BZERO=n |
|
|
|
# |
|
# Sizes of configurable things (0 disables) |
|
# |
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously |
|
# active tasks. This value must be a power of two. |
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of |
|
# of parameters that a task may receive (i.e., maxmum value |
|
# of 'argc') |
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread- |
|
# specific data that can be retained |
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file |
|
# descriptors (one for each open) |
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that |
|
# can be fopen'ed |
|
# CONFIG_NAME_MAX - The maximum size of a file name. |
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate |
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) |
|
# CONFIG_NUNGET_CHARS - Number of characters that can be |
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) |
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message |
|
# structures. The system manages a pool of preallocated |
|
# message structures to minimize dynamic allocations |
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with |
|
# a fixed payload size given by this settin (does not include |
|
# other message structure overhead. |
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that |
|
# can be passed to a watchdog handler |
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog |
|
# structures. The system manages a pool of preallocated |
|
# watchdog structures to minimize dynamic allocations |
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX |
|
# timer structures. The system manages a pool of preallocated |
|
# timer structures to minimize dynamic allocations. Set to |
|
# zero for all dynamic allocations. |
|
# |
|
CONFIG_MAX_TASKS=8 |
|
CONFIG_MAX_TASK_ARGS=4 |
|
CONFIG_NPTHREAD_KEYS=4 |
|
CONFIG_NFILE_DESCRIPTORS=6 |
|
CONFIG_NFILE_STREAMS=6 |
|
CONFIG_NAME_MAX=32 |
|
CONFIG_STDIO_BUFFER_SIZE=64 |
|
CONFIG_STDIO_LINEBUFFER=y |
|
CONFIG_NUNGET_CHARS=2 |
|
CONFIG_PREALLOC_MQ_MSGS=4 |
|
CONFIG_MQ_MAXMSGSIZE=32 |
|
CONFIG_MAX_WDOGPARMS=2 |
|
CONFIG_PREALLOC_WDOGS=4 |
|
CONFIG_PREALLOC_TIMERS=4 |
|
|
|
# |
|
# Filesystem configuration |
|
# |
|
# CONFIG_FS_FAT - Enable FAT filesystem support |
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size |
|
# CONFIG_FAT_LCNAMES - Enable use of the NT-style upper/lower case 8.3 |
|
# file name support. |
|
# CONFIG_FAT_LFN - Enable FAT long file names. NOTE: Microsoft claims |
|
# patents on FAT long file name technology. Please read the |
|
# disclaimer in the top-level COPYING file and only enable this |
|
# feature if you understand these issues. |
|
# CONFIG_FAT_MAXFNAME - If CONFIG_FAT_LFN is defined, then the |
|
# default, maximum long file name is 255 bytes. This can eat up |
|
# a lot of memory (especially stack space). If you are willing |
|
# to live with some non-standard, short long file names, then |
|
# define this value. A good choice would be the same value as |
|
# selected for CONFIG_NAME_MAX which will limit the visibility |
|
# of longer file names anyway. |
|
# CONFIG_FS_NXFFS: Enable NuttX FLASH file system (NXFF) support. |
|
# CONFIG_NXFFS_ERASEDSTATE: The erased state of FLASH. |
|
# This must have one of the values of 0xff or 0x00. |
|
# Default: 0xff. |
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, |
|
# don't both with file chunks smaller than this number of data bytes. |
|
# CONFIG_NXFFS_MAXNAMLEN: The maximum size of an NXFFS file name. |
|
# Default: 255. |
|
# CONFIG_NXFFS_PACKTHRESHOLD: When packing flash file data, |
|
# don't both with file chunks smaller than this number of data bytes. |
|
# Default: 32. |
|
# CONFIG_NXFFS_TAILTHRESHOLD: clean-up can either mean |
|
# packing files together toward the end of the file or, if file are |
|
# deleted at the end of the file, clean up can simply mean erasing |
|
# the end of FLASH memory so that it can be re-used again. However, |
|
# doing this can also harm the life of the FLASH part because it can |
|
# mean that the tail end of the FLASH is re-used too often. This |
|
# threshold determines if/when it is worth erased the tail end of FLASH |
|
# and making it available for re-use (and possible over-wear). |
|
# Default: 8192. |
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support |
|
# CONFIG_FS_RAMMAP - For file systems that do not support XIP, this |
|
# option will enable a limited form of memory mapping that is |
|
# implemented by copying whole files into memory. |
|
# |
|
CONFIG_FS_FAT=n |
|
CONFIG_FAT_LCNAMES=n |
|
CONFIG_FAT_LFN=n |
|
CONFIG_FAT_MAXFNAME=32 |
|
CONFIG_FS_NXFFS=n |
|
CONFIG_FS_ROMFS=n |
|
|
|
# |
|
# SPI-based MMC/SD driver |
|
# |
|
# CONFIG_MMCSD_NSLOTS |
|
# Number of MMC/SD slots supported by the driver |
|
# CONFIG_MMCSD_READONLY |
|
# Provide read-only access (default is read/write) |
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. |
|
# Default is 20MHz. |
|
# |
|
CONFIG_MMCSD_NSLOTS=1 |
|
CONFIG_MMCSD_READONLY=n |
|
CONFIG_MMCSD_SPICLOCK=12500000 |
|
|
|
# |
|
# Block driver buffering |
|
# |
|
# CONFIG_FS_READAHEAD |
|
# Enable read-ahead buffering |
|
# CONFIG_FS_WRITEBUFFER |
|
# Enable write buffering |
|
# |
|
CONFIG_FS_READAHEAD=n |
|
CONFIG_FS_WRITEBUFFER=n |
|
|
|
# |
|
# SDIO-based MMC/SD driver |
|
# |
|
# CONFIG_SDIO_DMA |
|
# SDIO driver supports DMA |
|
# CONFIG_MMCSD_MMCSUPPORT |
|
# Enable support for MMC cards |
|
# CONFIG_MMCSD_HAVECARDDETECT |
|
# SDIO driver card detection is 100% accurate |
|
# |
|
CONFIG_SDIO_DMA=n |
|
CONFIG_MMCSD_MMCSUPPORT=n |
|
CONFIG_MMCSD_HAVECARDDETECT=n |
|
|
|
# |
|
# TCP/IP and UDP support via uIP |
|
# CONFIG_NET - Enable or disable all network features |
|
# CONFIG_NET_IPv6 - Build in support for IPv6 |
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. |
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options |
|
# CONFIG_NET_BUFSIZE - uIP buffer size |
|
# CONFIG_NET_TCP - TCP support on or off |
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) |
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers |
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) |
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until |
|
# accept() is called. The size of the backlog is selected when listen() is called. |
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) |
|
# CONFIG_NET_UDP - UDP support on or off |
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off |
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections |
|
# CONFIG_NET_ICMP - ICMP ping response support on or off |
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off |
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address |
|
# CONFIG_NET_STATISTICS - uIP statistics on or off |
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window |
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table |
|
# CONFIG_NET_BROADCAST - Broadcast support |
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates |
|
# |
|
CONFIG_NET=n |
|
CONFIG_NET_IPv6=n |
|
CONFIG_NSOCKET_DESCRIPTORS=0 |
|
CONFIG_NET_SOCKOPTS=y |
|
CONFIG_NET_BUFSIZE=420 |
|
CONFIG_NET_TCP=n |
|
CONFIG_NET_TCP_CONNS=40 |
|
CONFIG_NET_MAX_LISTENPORTS=40 |
|
CONFIG_NET_UDP=n |
|
CONFIG_NET_UDP_CHECKSUMS=y |
|
#CONFIG_NET_UDP_CONNS=10 |
|
CONFIG_NET_ICMP=n |
|
CONFIG_NET_ICMP_PING=n |
|
#CONFIG_NET_PINGADDRCONF=0 |
|
CONFIG_NET_STATISTICS=y |
|
#CONFIG_NET_RECEIVE_WINDOW= |
|
#CONFIG_NET_ARPTAB_SIZE=8 |
|
CONFIG_NET_BROADCAST=n |
|
#CONFIG_NET_FWCACHE_SIZE=2 |
|
|
|
# |
|
# UIP Network Utilities |
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP |
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries |
|
# |
|
CONFIG_NET_DHCP_LIGHT=n |
|
CONFIG_NET_RESOLV_ENTRIES=4 |
|
|
|
# |
|
# USB Device Configuration |
|
# |
|
# CONFIG_USBDEV |
|
# Enables USB device support |
|
# CONFIG_USBDEV_ISOCHRONOUS |
|
# Build in extra support for isochronous endpoints |
|
# CONFIG_USBDEV_DUALSPEED |
|
# Hardware handles high and full speed operation (USB 2.0) |
|
# CONFIG_USBDEV_SELFPOWERED |
|
# Will cause USB features to indicate that the device is |
|
# self-powered |
|
# CONFIG_USBDEV_MAXPOWER |
|
# Maximum power consumption in mA |
|
# CONFIG_USBDEV_TRACE |
|
# Enables USB tracing for debug |
|
# CONFIG_USBDEV_TRACE_NRECORDS |
|
# Number of trace entries to remember |
|
# |
|
CONFIG_USBDEV=n |
|
CONFIG_USBDEV_ISOCHRONOUS=n |
|
CONFIG_USBDEV_DUALSPEED=n |
|
CONFIG_USBDEV_SELFPOWERED=y |
|
CONFIG_USBDEV_REMOTEWAKEUP=n |
|
CONFIG_USBDEV_MAXPOWER=100 |
|
CONFIG_USBDEV_TRACE=n |
|
CONFIG_USBDEV_TRACE_NRECORDS=128 |
|
|
|
# |
|
# USB Serial Device Configuration |
|
# |
|
# CONFIG_PL2303 |
|
# Enable compilation of the USB serial driver |
|
# CONFIG_PL2303_EPINTIN |
|
# The logical 7-bit address of a hardware endpoint that supports |
|
# interrupt IN operation |
|
# CONFIG_PL2303_EPBULKOUT |
|
# The logical 7-bit address of a hardware endpoint that supports |
|
# bulk OUT operation |
|
# CONFIG_PL2303_EPBULKIN |
|
# The logical 7-bit address of a hardware endpoint that supports |
|
# bulk IN operation |
|
# # CONFIG_PL2303_NWRREQS and CONFIG_PL2303_NRDREQS |
|
# The number of write/read requests that can be in flight |
|
# CONFIG_PL2303_VENDORID and CONFIG_PL2303_VENDORSTR |
|
# The vendor ID code/string |
|
# CONFIG_PL2303_PRODUCTID and CONFIG_PL2303_PRODUCTSTR |
|
# The product ID code/string |
|
# CONFIG_PL2303_RXBUFSIZE and CONFIG_PL2303_TXBUFSIZE |
|
# Size of the serial receive/transmit buffers |
|
# |
|
CONFIG_PL2303=n |
|
CONFIG_PL2303_EPINTIN=1 |
|
CONFIG_PL2303_EPBULKOUT=2 |
|
CONFIG_PL2303_EPBULKIN=3 |
|
CONFIG_PL2303_NWRREQS=4 |
|
CONFIG_PL2303_NRDREQS=4 |
|
CONFIG_PL2303_VENDORID=0x067b |
|
CONFIG_PL2303_PRODUCTID=0x2303 |
|
CONFIG_PL2303_VENDORSTR="Nuttx" |
|
CONFIG_PL2303_PRODUCTSTR="USBdev Serial" |
|
CONFIG_PL2303_RXBUFSIZE=512 |
|
CONFIG_PL2303_TXBUFSIZE=512 |
|
|
|
# |
|
# USB Storage Device Configuration |
|
# |
|
# CONFIG_USBMSC |
|
# Enable compilation of the USB storage driver |
|
# CONFIG_USBMSC_EP0MAXPACKET |
|
# Max packet size for endpoint 0 |
|
# CONFIG_USBMSC_EPBULKOUT and CONFIG_USBMSC_EPBULKIN |
|
# The logical 7-bit address of a hardware endpoints that support |
|
# bulk OUT and IN operations |
|
# CONFIG_USBMSC_NWRREQS and CONFIG_USBMSC_NRDREQS |
|
# The number of write/read requests that can be in flight |
|
# CONFIG_USBMSC_BULKINREQLEN and CONFIG_USBMSC_BULKOUTREQLEN |
|
# The size of the buffer in each write/read request. This |
|
# value needs to be at least as large as the endpoint |
|
# maxpacket and ideally as large as a block device sector. |
|
# CONFIG_USBMSC_VENDORID and CONFIG_USBMSC_VENDORSTR |
|
# The vendor ID code/string |
|
# CONFIG_USBMSC_PRODUCTID and CONFIG_USBMSC_PRODUCTSTR |
|
# The product ID code/string |
|
# CONFIG_USBMSC_REMOVABLE |
|
# Select if the media is removable |
|
# |
|
CONFIG_USBMSC=n |
|
CONFIG_USBMSC_EP0MAXPACKET=64 |
|
CONFIG_USBMSC_EPBULKOUT=2 |
|
CONFIG_USBMSC_EPBULKIN=5 |
|
CONFIG_USBMSC_NRDREQS=2 |
|
CONFIG_USBMSC_NWRREQS=2 |
|
CONFIG_USBMSC_BULKINREQLEN=256 |
|
CONFIG_USBMSC_BULKOUTREQLEN=256 |
|
CONFIG_USBMSC_VENDORID=0x584e |
|
CONFIG_USBMSC_VENDORSTR="NuttX" |
|
CONFIG_USBMSC_PRODUCTID=0x5342 |
|
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" |
|
CONFIG_USBMSC_VERSIONNO=0x0399 |
|
CONFIG_USBMSC_REMOVABLE=y |
|
|
|
# |
|
# Watchdog timer configuration |
|
# |
|
# CONFIG_WATCHDOG - Enable overall watchdog timer driver support. |
|
# |
|
# The STM32 also needs one of the following enabled: |
|
# |
|
# CONFIG_STM32_WWDG=y, OR |
|
# CONFIG_STM32_IWDG=y (but not both) |
|
# |
|
CONFIG_WATCHDOG=n |
|
|
|
# |
|
# Settings for examples/uip |
|
# |
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) |
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) |
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) |
|
CONFIG_EXAMPLE_UIP_DHCPC=n |
|
|
|
# |
|
# Settings for examples/nettest |
|
CONFIG_EXAMPLE_NETTEST_SERVER=n |
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n |
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n |
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) |
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) |
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) |
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) |
|
|
|
# |
|
# Settings for examples/buttons |
|
# |
|
# CONFIG_EXAMPLE_BUTTONS_MIN and CONFIG_EXAMPLE_BUTTONS_MAX |
|
# Lowest and highest button number (0-7) |
|
# CONFIG_EXAMPLE_IRQBUTTONS_MIN and CONFIG_EXAMPLE_IRQBUTTONS_MAX |
|
# Lowest and highest interrupting button number (-7) |
|
# CONFIG_EXAMPLE_BUTTONS_NAMEn - Name for button n |
|
# |
|
CONFIG_EXAMPLE_BUTTONS_MIN=0 |
|
CONFIG_EXAMPLE_BUTTONS_MAX=7 |
|
CONFIG_EXAMPLE_IRQBUTTONS_MIN=2 |
|
CONFIG_EXAMPLE_IRQBUTTONS_MAX=7 |
|
CONFIG_EXAMPLE_BUTTONS_NAME0="WAKEUP" |
|
CONFIG_EXAMPLE_BUTTONS_NAME1="TAMPER" |
|
CONFIG_EXAMPLE_BUTTONS_NAME2="KEY" |
|
CONFIG_EXAMPLE_BUTTONS_NAME3="SELECT" |
|
CONFIG_EXAMPLE_BUTTONS_NAME4="DOWN" |
|
CONFIG_EXAMPLE_BUTTONS_NAME5="LEFT" |
|
CONFIG_EXAMPLE_BUTTONS_NAME6="RIGHT" |
|
CONFIG_EXAMPLE_BUTTONS_NAME7="UP" |
|
|
|
# |
|
# Settings for examples/ostest |
|
# |
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1 |
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 |
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 |
|
|
|
# |
|
# Settings for apps/nshlib |
|
# |
|
# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer |
|
# CONFIG_NSH_STRERROR - Use strerror(errno) |
|
# CONFIG_NSH_LINELEN - Maximum length of one command line |
|
# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi |
|
# CONFIG_NSH_DISABLESCRIPT - Disable scripting support |
|
# CONFIG_NSH_DISABLEBG - Disable background commands |
|
# CONFIG_NSH_ROMFSETC - Use startup script in /etc |
|
# CONFIG_NSH_CONSOLE - Use serial console front end |
|
# CONFIG_NSH_TELNET - Use telnetd console front end |
|
# CONFIG_NSH_ARCHINIT - Platform provides architecture |
|
# specific initialization (nsh_archinitialize()). |
|
# |
|
# If CONFIG_NSH_TELNET is selected: |
|
# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size |
|
# CONFIG_NSH_DHCPC - Obtain address using DHCP |
|
# CONFIG_NSH_IPADDR - Provides static IP address |
|
# CONFIG_NSH_DRIPADDR - Provides static router IP address |
|
# CONFIG_NSH_NETMASK - Provides static network mask |
|
# CONFIG_NSH_NOMAC - Use a bogus MAC address |
|
# |
|
# If CONFIG_NSH_ROMFSETC is selected: |
|
# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint |
|
# CONFIG_NSH_INITSCRIPT - Relative path to init script |
|
# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor |
|
# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size |
|
# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor |
|
# CONFIG_NSH_FATSECTSIZE - FAT FS sector size |
|
# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors |
|
# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint |
|
# |
|
CONFIG_NSH_FILEIOSIZE=512 |
|
CONFIG_NSH_STRERROR=n |
|
CONFIG_NSH_LINELEN=64 |
|
CONFIG_NSH_NESTDEPTH=3 |
|
CONFIG_NSH_DISABLESCRIPT=n |
|
CONFIG_NSH_DISABLEBG=n |
|
CONFIG_NSH_ROMFSETC=n |
|
CONFIG_NSH_CONSOLE=y |
|
CONFIG_NSH_TELNET=n |
|
CONFIG_NSH_ARCHINIT=n |
|
CONFIG_NSH_IOBUFFER_SIZE=512 |
|
CONFIG_NSH_DHCPC=n |
|
CONFIG_NSH_NOMAC=n |
|
CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2) |
|
CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) |
|
CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0) |
|
CONFIG_NSH_ROMFSMOUNTPT="/etc" |
|
CONFIG_NSH_INITSCRIPT="init.d/rcS" |
|
CONFIG_NSH_ROMFSDEVNO=0 |
|
CONFIG_NSH_ROMFSSECTSIZE=64 |
|
CONFIG_NSH_FATDEVNO=1 |
|
CONFIG_NSH_FATSECTSIZE=512 |
|
CONFIG_NSH_FATNSECTORS=1024 |
|
CONFIG_NSH_FATMOUNTPT=/tmp |
|
|
|
# |
|
# Architecture-specific NSH options |
|
# |
|
CONFIG_NSH_MMCSDSPIPORTNO=0 |
|
CONFIG_NSH_MMCSDSLOTNO=0 |
|
CONFIG_NSH_MMCSDMINOR=0 |
|
|
|
# |
|
# Settings for examples/usbserial |
|
# |
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY |
|
# Only verify IN (device-to-host) data transfers. Default: both |
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY |
|
# Only verify OUT (host-to-device) data transfers. Default: both |
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL |
|
# Send only small, single packet messages. Default: Send large and small. |
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG |
|
# Send only large, multi-packet messages. Default: Send large and small. |
|
# |
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n |
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n |
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n |
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n |
|
|
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n |
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n |
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n |
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n |
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n |
|
|
|
# |
|
# Settings for examples/watchdog |
|
# |
|
# This test depends on these specific Watchdog/NSH configurations settings (your |
|
# specific watchdog hardware settings might require additional settings). |
|
# |
|
# CONFIG_WATCHDOG- Enables watchdog timer support support. |
|
# CONFIG_NSH_BUILTIN_APPS - Build the watchdog time test as an NSH |
|
# built-in function. Default: Not built! The example can only be used |
|
# as an NSH built-in application |
|
# |
|
# The STM32 also needs one of the following enabled: |
|
# |
|
# CONFIG_STM32_WWDG=y, OR |
|
# CONFIG_STM32_IWDG=y (but not both) |
|
# |
|
# Specific configuration options for this example include: |
|
# |
|
# CONFIG_EXAMPLES_WATCHDOG_DEVPATH - The path to the Watchdog device. |
|
# Default: /dev/watchdog0 |
|
# CONFIG_EXAMPLES_WATCHDOG_PINGTIME - Time in milliseconds that the example |
|
# will ping the watchdog before letting the watchdog expire. Default: 5000 |
|
# milliseconds |
|
# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY - Time delay between pings in |
|
# milliseconds. Default: 500 milliseconds. |
|
# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT - The watchdog timeout value in |
|
# milliseconds before the watchdog timer expires. Default: 2000 |
|
# milliseconds. |
|
# |
|
# CONFIG_EXAMPLES_WATCHDOG_DEVPATH |
|
# CONFIG_EXAMPLES_WATCHDOG_PINGTIME |
|
# CONFIG_EXAMPLES_WATCHDOG_PINGDELAY |
|
# CONFIG_EXAMPLES_WATCHDOG_TIMEOUT |
|
|
|
# |
|
# Stack and heap information |
|
# |
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP |
|
# operation from FLASH but must copy initialized .data sections to RAM. |
|
# (should also be =n for the STM3210E-EVAL which always runs from flash) |
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH |
|
# but copy themselves entirely into RAM for better performance. |
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle |
|
# all stack operations outside of the nuttx model. |
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) |
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. |
|
# This is the thread that (1) performs the inital boot of the system up |
|
# to the point where user_start() is spawned, and (2) there after is the |
|
# IDLE thread that executes only when there is no other thread ready to |
|
# run. |
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate |
|
# for the main user thread that begins at the user_start() entry point. |
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size |
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size |
|
# CONFIG_HEAP_BASE - The beginning of the heap |
|
# CONFIG_HEAP_SIZE - The size of the heap |
|
# |
|
CONFIG_BOOT_RUNFROMFLASH=n |
|
CONFIG_BOOT_COPYTORAM=n |
|
CONFIG_CUSTOM_STACK=n |
|
#CONFIG_STACK_POINTER |
|
CONFIG_IDLETHREAD_STACKSIZE=1024 |
|
CONFIG_USERMAIN_STACKSIZE=2048 |
|
CONFIG_PTHREAD_STACK_MIN=256 |
|
CONFIG_PTHREAD_STACK_DEFAULT=2048 |
|
CONFIG_HEAP_BASE= |
|
CONFIG_HEAP_SIZE=
|
|
|