You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
214 lines
5.4 KiB
214 lines
5.4 KiB
# |
|
# For a description of the syntax of this configuration file, |
|
# see misc/tools/kconfig-language.txt. |
|
# |
|
config LCD_MAXCONTRAST |
|
int "LCD maximum contrast" |
|
default 63 if NOKIA6100_S1D15G10 |
|
default 127 if NOKIA6100_PCF8833 |
|
default 255 if LCD_P14201 |
|
default 63 |
|
---help--- |
|
must be 63 with the Epson controller and 127 with |
|
the Phillips controller. |
|
|
|
config LCD_MAXPOWER |
|
int "LCD maximum power" |
|
default 1 |
|
---help--- |
|
Maximum value of backlight setting. The backlight |
|
control is managed outside of the 6100 driver so this value has no |
|
meaning to the driver. Board-specific logic may place restrictions on |
|
this value. |
|
|
|
config LCD_P14201 |
|
bool "Rit P1402 series display" |
|
default n |
|
---help--- |
|
p14201.c. Driver for RiT P14201 series display with SD1329 IC |
|
controller. This OLED is used with older versions of the |
|
TI/Luminary LM3S8962 Evaluation Kit. |
|
if LCD_P14201 |
|
config P14201_NINTERFACES |
|
int "Number of physical P14201 devices" |
|
default 1 |
|
range 1,1 |
|
---help--- |
|
Specifies the number of physical P14201 |
|
devices that will be supported. |
|
|
|
config P14201_SPIMODE |
|
int "SPI mode" |
|
default 2 |
|
range 0,3 |
|
---help--- |
|
Controls the SPI mode |
|
|
|
config P14201_FREQUENCY |
|
int "SPI frequency" |
|
default 1000000 |
|
---help--- |
|
Define to use a different bus frequency,FIXME DEFAULT VALUE OK? |
|
|
|
config P14201_FRAMEBUFFER |
|
bool "Enable P14201 GDDRAM cache" |
|
default y |
|
---help--- |
|
If defined, accesses will be performed |
|
using an in-memory copy of the OLEDs GDDRAM. This cost of this |
|
buffer is 128 * 96 / 2 = 6Kb. If this is defined, then the driver |
|
will be fully functional. If not, then it will have the following |
|
limitations: |
|
|
|
Reading graphics memory cannot be supported, and |
|
|
|
All pixel writes must be aligned to byte boundaries. |
|
The latter limitation effectively reduces the 128x96 disply to 64x96. |
|
endif |
|
|
|
config LCD_NOKIA6100 |
|
bool "Nokia 6100 display support" |
|
default n |
|
---help--- |
|
nokia6100.c. Supports the Nokia 6100 display with either the Philips |
|
PCF883 or the Epson S1D15G10 display controller. This LCD is used |
|
with the Olimex LPC1766-STK (but has not been fully integrated). |
|
if LCD_NOKIA6100 |
|
config NOKIA6100_NINTERFACES |
|
int "Number of physical NOKIA6100 devices" |
|
default 1 |
|
range 1,1 |
|
---help--- |
|
Specifies the number of physical Nokia |
|
6100 devices that will be supported. |
|
|
|
choice NOKIA6100_CONTROLLER |
|
prompt "Controller Setup" |
|
default NOKIA6100_S1D15G10 |
|
config NOKIA6100_S1D15G10 |
|
bool "S1D15G10 controller" |
|
---help--- |
|
Selects the Epson S1D15G10 display controller |
|
|
|
config NOKIA6100_PCF8833 |
|
bool "PCF8833 controller" |
|
---help--- |
|
Selects the Phillips PCF8833 display controller |
|
endchoice |
|
|
|
config NOKIA6100_SPIMODE |
|
int "SPI mode" |
|
default 0 |
|
range 0,3 |
|
---help--- |
|
Controls the SPI mode |
|
|
|
config NOKIA6100_FREQUENCY |
|
int "SPI frequency" |
|
default 1000000 |
|
---help--- |
|
Define to use a different bus frequency |
|
|
|
config NOKIA6100_BLINIT |
|
bool "Back light initial" |
|
default n |
|
---help--- |
|
Initial backlight setting |
|
The following may need to be tuned for your hardware: |
|
|
|
config NOKIA6100_BPP |
|
int "Display bits per pixel" |
|
default 8 |
|
---help--- |
|
Device supports 8, 12, and 16 bits per pixel. |
|
|
|
config NOKIA6100_INVERT |
|
int "Display inversion" |
|
default 1 |
|
range 0,1 |
|
---help--- |
|
Display inversion, 0 or 1, Default: 1 |
|
|
|
config NOKIA6100_MY |
|
int "Display row direction" |
|
default 0 |
|
range 0,1 |
|
---help--- |
|
Display row direction, 0 or 1, Default: 0 |
|
|
|
config NOKIA6100_MX |
|
int "Display column direction" |
|
default 1 |
|
range 0,1 |
|
---help--- |
|
Display column direction, 0 or 1, Default: 1 |
|
|
|
config NOKIA6100_V |
|
int "Display address direction" |
|
default 0 |
|
range 0,1 |
|
---help--- |
|
Display address direction, 0 or 1, Default: 0 |
|
|
|
config NOKIA6100_ML |
|
int "Display scan direction" |
|
default 0 |
|
range 0,1 |
|
---help--- |
|
Display scan direction, 0 or 1, Default: 0 |
|
|
|
config NOKIA6100_RGBORD |
|
int "Display RGB order" |
|
default 0 |
|
range 0,1 |
|
---help--- |
|
Display RGB order, 0 or 1, Default: 0 |
|
Required LCD driver settings: |
|
endif |
|
|
|
config LCD_UG9664HSWAG01 |
|
bool "9664HSWAG01 OLED Display Module" |
|
default n |
|
---help--- |
|
ug-9664hswag01.c. OLED Display Module, UG-9664HSWAG01", Univision |
|
Technology Inc. Used with the LPC Xpresso and Embedded Artists |
|
base board. |
|
|
|
choice |
|
prompt "LCD Orientation" |
|
default LCD_LANDSCAPE |
|
depends on LCD |
|
---help--- |
|
Some LCD drivers may support displays in different orientations. |
|
If the LCD driver supports this capability, than these are configuration |
|
options to select that display orientation. |
|
|
|
config LCD_LANDSCAPE |
|
bool "Landscape orientation" |
|
---help--- |
|
Define for "landscape" orientation support. Landscape mode refers one |
|
of two orientations where the the display is wider than it is tall |
|
(LCD_RLANDSCAPE is the other). This is the default orientation. |
|
|
|
config LCD_PORTRAIT |
|
bool "Portrait orientation" |
|
---help--- |
|
Define for "portrait" orientation support. Portrait mode refers one |
|
of two orientations where the the display is taller than it is wide |
|
(LCD_RPORTAIT is the other). |
|
|
|
config LCD_RPORTRAIT |
|
bool "Reverse portrait display" |
|
---help--- |
|
Define for "reverse portrait" orientation support. Reverse portrait mode |
|
refers one of two orientations where the the display is taller than it is |
|
wide (LCD_PORTAIT is the other). |
|
|
|
config LCD_RLANDSCAPE |
|
bool "Reverse landscape orientation" |
|
---help--- |
|
Define for "reverse landscape" orientation support. Reverse landscape mode |
|
refers one of two orientations where the the display is wider than it is |
|
tall (LCD_LANDSCAPE is the other). |
|
|
|
endchoice
|
|
|