You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
221 lines
8.1 KiB
221 lines
8.1 KiB
/**************************************************************************** |
|
* configs/pic32-starterkit/include/board.h |
|
* include/arch/board/board.h |
|
* |
|
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. |
|
* Author: Gregory Nutt <gnutt@nuttx.org> |
|
* |
|
* Redistribution and use in source and binary forms, with or without |
|
* modification, are permitted provided that the following conditions |
|
* are met: |
|
* |
|
* 1. Redistributions of source code must retain the above copyright |
|
* notice, this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright |
|
* notice, this list of conditions and the following disclaimer in |
|
* the documentation and/or other materials provided with the |
|
* distribution. |
|
* 3. Neither the name NuttX nor the names of its contributors may be |
|
* used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
|
* POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************/ |
|
|
|
#ifndef __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H |
|
#define __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H |
|
|
|
/**************************************************************************** |
|
* Included Files |
|
****************************************************************************/ |
|
|
|
#include <nuttx/config.h> |
|
|
|
#ifndef __ASSEMBLY__ |
|
# include <stdbool.h> |
|
#endif |
|
|
|
/**************************************************************************** |
|
* Pre-Processor Definitions |
|
****************************************************************************/ |
|
/* Configuration ************************************************************/ |
|
|
|
/* Clocking *****************************************************************/ |
|
/* Crystal frequencies */ |
|
|
|
#define BOARD_POSC_FREQ 8000000 /* Primary OSC XTAL frequency (8MHz) */ |
|
#define BOARD_SOSC_FREQ 32768 /* Secondary OSC XTAL frequency (32.768KHz) */ |
|
|
|
/* PLL configuration and resulting CPU clock. |
|
* CPU_CLOCK = ((POSC_FREQ / IDIV) * MULT) / ODIV |
|
*/ |
|
|
|
#define BOARD_PLL_IDIV 2 /* PLL input divider */ |
|
#define BOARD_PLL_MULT 20 /* PLL multiplier */ |
|
#define BOARD_PLL_ODIV 1 /* PLL output divider */ |
|
|
|
#define BOARD_CPU_CLOCK 80000000 /* CPU clock (80MHz = 8MHz * 20 / 2) */ |
|
|
|
/* USB PLL configuration. |
|
* USB_CLOCK = ((POSC_XTAL / IDIV) * 24) / 2 |
|
*/ |
|
|
|
#define BOARD_UPLL_IDIV 2 /* USB PLL divider (revisit) */ |
|
#define BOARD_USB_CLOCK 48000000 /* USB clock (8MHz / 2) * 24 / 2) */ |
|
|
|
/* Peripheral clock is divided down from CPU clock. |
|
* PBCLOCK = CPU_CLOCK / PBDIV |
|
*/ |
|
|
|
#define BOARD_PBDIV 2 /* Peripheral clock divisor (PBDIV) */ |
|
#define BOARD_PBCLOCK 40000000 /* Peripheral clock (PBCLK = 80MHz/2) */ |
|
|
|
/* Watchdog pre-scaler (re-visit) */ |
|
|
|
#define BOARD_WD_ENABLE 0 /* Watchdog is disabled */ |
|
#define BOARD_WD_PRESCALER 8 /* Watchdog pre-scaler */ |
|
|
|
/* Ethernet MII clocking. |
|
* |
|
* The clock divider used to create the MII Management Clock (MDC). The MIIM |
|
* module uses the SYSCLK as an input clock. According to the IEEE 802.3 |
|
* Specification this should be no faster than 2.5 MHz. However, some PHYs |
|
* support clock rates up to 12.5 MHz. |
|
*/ |
|
|
|
#define BOARD_EMAC_MIIM_DIV 32 /* Ideal: 80MHz/32 = 2.5MHz */ |
|
|
|
/* LED definitions **********************************************************/ |
|
/* LED Configuration ********************************************************/ |
|
/* The PIC32MX Ethernet Starter kit has 3 user LEDs labeled LED1-3 on the |
|
* board graphics (but referred to as LED4-6 in the schematic): |
|
* |
|
* PIN User's Guide Board Stencil Notes |
|
* --- ------------- -------------- ------------------------- |
|
* RD0 "User LED D4" "LED1 (RD0") High illuminates (RED) |
|
* RD2 "User LED D5" "LED3 (RD2)" High illuminates (YELLOW) |
|
* RD1 "User LED D6" "LED2 (RD1)" High illuminates (GREEN) |
|
* |
|
* We will use the labels on the board to identify LEDs |
|
* |
|
* There are 5 additional LEDs available on the MEB (but not used by NuttX): |
|
* |
|
* RD1 LED1 |
|
* RD2 LED2 |
|
* RD3 LED3 |
|
* RC1 LED4 |
|
* RC2 LED5 |
|
*/ |
|
|
|
/* LED index values for use with pic32mx_setled() */ |
|
|
|
#define PIC32MX_STARTERKIT_LED1 0 |
|
#define PIC32MX_STARTERKIT_LED2 1 |
|
#define PIC32MX_STARTERKIT_LED3 2 |
|
#define PIC32MX_STARTERKIT_NLEDS 3 |
|
|
|
/* LED bits for use with pic32mx_setleds() */ |
|
|
|
#define PIC32MX_STARTERKIT_LED1_BIT (1 << PIC32MX_STARTERKIT_LED1) |
|
#define PIC32MX_STARTERKIT_LED2_BIT (1 << PIC32MX_STARTERKIT_LED2) |
|
#define PIC32MX_STARTERKIT_LED3_BIT (1 << PIC32MX_STARTERKIT_LED3) |
|
|
|
/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 3 LEDs |
|
* on board the Ethernet Starter Kit. The following definitions |
|
* describe how NuttX controls the LEDs: |
|
* |
|
* ON OFF |
|
* ------------------------- ---- ---- ---- ---- ---- ---- |
|
* LED1 LED2 LED3 LED1 LED2 LED3 |
|
* ------------------------- ---- ---- ---- ---- ---- ---- |
|
* LED_STARTED 0 OFF OFF OFF --- --- --- |
|
* LED_HEAPALLOCATE 1 ON OFF N/C --- --- --- |
|
* LED_IRQSENABLED 2 OFF ON N/C --- --- --- |
|
* LED_STACKCREATED 3 ON ON N/C --- --- --- |
|
* LED_INIRQ 4 N/C N/C ON N/C N/C OFF |
|
* LED_SIGNAL 4 N/C N/C ON N/C N/C OFF |
|
* LED_ASSERTION 4 N/C N/C ON N/C N/C OFF |
|
* LED_PANIC 5 ON N/C N/C OFF N/C N/C |
|
*/ |
|
|
|
#define LED_STARTED 0 |
|
#define LED_HEAPALLOCATE 1 |
|
#define LED_IRQSENABLED 2 |
|
#define LED_STACKCREATED 3 |
|
#define LED_INIRQ 4 |
|
#define LED_SIGNAL 4 |
|
#define LED_ASSERTION 4 |
|
#define LED_PANIC 5 |
|
|
|
#define LED_NVALUES 6 |
|
|
|
/* Switch definitions *******************************************************/ |
|
/* The PIC32 starter kit has 3 switches: |
|
* |
|
* RD7 Switch SW2 (low when closed) |
|
* RD6 Switch SW1 (low when closed) |
|
* RD13 Switch SW3 (low when closed) |
|
*/ |
|
|
|
/**************************************************************************** |
|
* Public Types |
|
****************************************************************************/ |
|
|
|
#ifndef __ASSEMBLY__ |
|
|
|
/**************************************************************************** |
|
* Inline Functions |
|
****************************************************************************/ |
|
|
|
/**************************************************************************** |
|
* Public Function Prototypes |
|
****************************************************************************/ |
|
|
|
#ifdef __cplusplus |
|
#define EXTERN extern "C" |
|
extern "C" { |
|
#else |
|
#define EXTERN extern |
|
#endif |
|
|
|
/**************************************************************************** |
|
* Name: pic32mx_ledinit and pic32mx_setled |
|
* |
|
* Description: |
|
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board |
|
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces |
|
* are available to control the LEDs from user applicaitons. |
|
* |
|
****************************************************************************/ |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_ledinit(void); |
|
#endif |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_setled(int led, bool ledon); |
|
#endif |
|
|
|
#ifndef CONFIG_ARCH_LEDS |
|
EXTERN void pic32mx_setleds(uint8_t ledset); |
|
#endif |
|
|
|
#undef EXTERN |
|
#ifdef __cplusplus |
|
} |
|
#endif |
|
|
|
#endif /* __ASSEMBLY__ */ |
|
#endif /* __CONFIGS_SURE_PIC32MX_INCLUDE_BOARD_H */
|
|
|