You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
714 lines
24 KiB
714 lines
24 KiB
# |
|
# For a description of the syntax of this configuration file, |
|
# see misc/tools/kconfig-language.txt. |
|
# |
|
|
|
choice |
|
prompt "Select target board" |
|
default ARCH_BOARD_CUSTOM |
|
---help--- |
|
Select the board hosting the architure. You must first select the |
|
exact MCU part number, then the boards supporting that part will |
|
be available for selection. Use ARCH_BOARD_CUSTOM to create a new |
|
board configuration. |
|
|
|
config ARCH_BOARD_AMBER |
|
bool "Amber Web Server" |
|
depends on ARCH_CHIP_ATMEGA128 |
|
---help--- |
|
This is placeholder for the SoC Robotics Amber Web Server that is based |
|
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is |
|
there is untested due to tool-related issues. |
|
|
|
config ARCH_BOARD_AVR32DEV1 |
|
bool "Atmel AVR32DEV1 board" |
|
depends on ARCH_CHIP_AT32UC3B0256 |
|
---help--- |
|
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is |
|
based on the Atmel AT32UC3B0256 MCU and uses a specially patched |
|
version of the GNU toolchain: The patches provide support for the |
|
AVR32 family. That patched GNU toolchain is available only from the |
|
Atmel website. STATUS: This port is functional but very basic. There |
|
are configurations for NSH and the OS test. |
|
|
|
config ARCH_BOARD_C5471EVM |
|
bool "Spectrum Digital C5471 evaluation board" |
|
depends on ARCH_CHIP_C5471 |
|
---help--- |
|
This is a port to the Spectrum Digital C5471 evaluation board. The |
|
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general |
|
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180. |
|
NuttX runs on the ARM core and is built with a GNU arm-elf toolchain*. |
|
This port is complete and verified. |
|
|
|
config ARCH_BOARD_COMPALE88 |
|
bool "Compal e88 phone" |
|
depends on ARCH_CHIP_CALYPSO |
|
---help--- |
|
These directories contain the board support for compal e88 and e99 phones. |
|
These ports are based on patches contributed by Denis Carikli for both the |
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and |
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches. |
|
|
|
config ARCH_BOARD_COMPALE99 |
|
bool "Compal e99 phone" |
|
depends on ARCH_CHIP_CALYPSO |
|
---help--- |
|
These directories contain the board support for compal e88 and e99 phones. |
|
These ports are based on patches contributed by Denis Carikli for both the |
|
compal e99 and e88. The patches were made by Alan Carvalho de Assis and |
|
Denis Carikli using the Stefan Richter's Osmocom-bb patches. |
|
|
|
config ARCH_BOARD_DEMOS92S12NEC64 |
|
bool "Freescale DMO9S12NE64 board" |
|
depends on ARCH_CHIP_MCS92S12NEC64 |
|
---help--- |
|
Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This |
|
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it |
|
is code complete but has not yet been verified. |
|
|
|
config ARCH_BOARD_EA3131 |
|
bool "Embedded Artists EA3131 Development board" |
|
depends on ARCH_CHIP_LPC3131 |
|
---help--- |
|
Embedded Artists EA3131 Development board. This board is based on the |
|
an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*. |
|
STATUS: This port is complete and mature. |
|
|
|
config ARCH_BOARD_EA3152 |
|
bool "Embedded Artists EA3152 Development board" |
|
depends on ARCH_CHIP_LPC3152 |
|
---help--- |
|
Embedded Artists EA3152 Development board. This board is based on the |
|
an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*. |
|
STATUS: This port is has not be exercised well, but since it is |
|
a simple derivative of the ea3131, it should be fully functional. |
|
|
|
config ARCH_BOARD_EAGLE100 |
|
bool "Micromint Eagle-100 Development board" |
|
depends on ARCH_CHIP_LM3S6918 |
|
---help--- |
|
Micromint Eagle-100 Development board. This board is based on the |
|
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the |
|
arm-elf toolchain*. STATUS: This port is complete and mature. |
|
|
|
config ARCH_BOARD_EKK_LM3S9B96 |
|
bool "TI/Stellaris EKK-LM3S9B96" |
|
depends on ARCH_CHIP_LM3S9B96 |
|
---help--- |
|
TI/Stellaris EKK-LM3S9B96 board. This board is based on the |
|
an EKK-LM3S9B96 which is a Cortex-M3. |
|
|
|
config ARCH_BOARD_EZ80F910200KITG |
|
bool "ZiLOG ez80f0910200kitg development kit" |
|
depends on ARCH_CHIP_EZ80F91 |
|
---help--- |
|
ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f0910200kitg |
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line |
|
tools. The development environment is Cygwin under WinXP. |
|
|
|
config ARCH_BOARD_EZ80F910200ZCO |
|
bool "ZiLOG ez80f0910200zco development kit" |
|
depends on ARCH_CHIP_EZ80F91 |
|
---help--- |
|
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200zco |
|
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line |
|
tools. The development environment is Cygwin under WinXP. |
|
|
|
config ARCH_BOARD_HYMINI_STM32V |
|
bool "HY-Mini STM32v board" |
|
depends on ARCH_CHIP_STM32F103VCT |
|
---help--- |
|
A configuration for the HY-Mini STM32v board. This board is based on the |
|
STM32F103VCT chip. |
|
|
|
config ARCH_BOARD_LINCOLN60 |
|
bool "Micromint Lincoln 60 board" |
|
depends on ARCH_CHIP_LPC1769 |
|
---help--- |
|
Micromint Lincoln 60 board using the NXP LPC1769 MCU. |
|
|
|
config ARCH_BOARD_KWIKSTIK_K40 |
|
bool "FreeScale KwikStik-K40 development board" |
|
depends on ARCH_CHIP_MK40X256VLQ100 |
|
---help--- |
|
Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40 |
|
development board. |
|
|
|
config ARCH_BOARD_LM3S6432S2E |
|
bool "Stellaris RDK-S2E Reference Design Kit" |
|
depends on ARCH_CHIP_LM3S6432 |
|
---help--- |
|
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to |
|
Serial module. |
|
|
|
config ARCH_BOARD_LM3S6965EK |
|
bool "Stellaris LM3S6965 Evaluation Kit" |
|
depends on ARCH_CHIP_LM3S6965 |
|
---help--- |
|
Stellaris LM3S6965 Evaluation Kit. This board is based on the |
|
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the |
|
arm-elf toolchain*. STATUS: This port is complete and mature. |
|
|
|
config ARCH_BOARD_LM3S8962EK |
|
bool "Stellaris LMS38962 Evaluation Kit" |
|
depends on ARCH_CHIP_LM3S8962 |
|
---help--- |
|
Stellaris LMS38962 Evaluation Kit. |
|
|
|
config ARCH_BOARD_LPCXPRESSO |
|
bool "NXP LPCExpresso LPC1768" |
|
depends on ARCH_CHIP_LPC1768 |
|
---help--- |
|
Embedded Artists base board with NXP LPCExpresso LPC1768. This board |
|
is based on the NXP LPC1768. The Code Red toolchain is used by default. |
|
|
|
config ARCH_BOARD_LPC4330_XPLORER |
|
bool "NXG LPC4330-Xplorer" |
|
depends on ARCH_CHIP_LPC4330FET100 |
|
---help--- |
|
NXG Technologoies LPC4330 Xplorer board. This board is based on the |
|
LPC4330FET100. The Code Red toolchain is used by default. |
|
|
|
config ARCH_BOARD_M68332EVB |
|
bool "Motoroloa M68332EVB" |
|
depends on ARCH_M68332 |
|
---help--- |
|
This is a work in progress for the venerable m68322evb board from |
|
Motorola. This OS is also built with the arm-elf toolchain. STATUS: |
|
This port was never completed. |
|
|
|
config ARCH_BOARD_MBED |
|
bool "mbed LCP1768" |
|
depends on ARCH_CHIP_LPC1768 |
|
---help--- |
|
The configurations in this directory support the mbed board (http://mbed.org) |
|
that features the NXP LPC1768 microcontroller. This OS is also built |
|
with the arm-elf toolchain*. STATUS: Contributed. |
|
|
|
config ARCH_BOARD_MCU123 |
|
bool "mcu123.com LPC2148 Development Board" |
|
depends on ARCH_CHIP_LPC2148 |
|
---help--- |
|
This port is for the NXP LPC2148 as provided on the mcu123.com |
|
lpc214x development board. This OS is also built with the arm-elf |
|
toolchain*. The port supports serial, timer0, spi, and usb. |
|
|
|
config ARCH_BOARD_MICROPENDOUS3 |
|
bool "Opendous Micropendous 3 board" |
|
depends on ARCH_CHIP_AT90USB646 || ARCH_CHIP_AT90USB647 || ARCH_CHIP_AT90USB1286 || ARCH_CHIP_AT90USB1287 |
|
---help--- |
|
This is a port to the Opendous Micropendous 3 board. This board may |
|
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU. |
|
Support is configured for the AT90USB647. |
|
|
|
config ARCH_BOARD_MX1ADS |
|
bool "Motorola MX1ADS development board" |
|
depends on ARCH_CHIP_IMX1 |
|
---help--- |
|
This is a port to the Motorola MX1ADS development board. That board |
|
is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T. |
|
STATUS: This port is nearly code complete but was never fully |
|
integrated due to tool-related issues. |
|
|
|
config ARCH_BOARD_NE64BADGE |
|
bool "FEG NE64 /PoE Badge board" |
|
depends on ARCH_CHIP_MCS92S12NEC64 |
|
---help--- |
|
Future Electronics Group NE64 /PoE Badge board based on the |
|
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. |
|
STATUS: Under development. The port is code-complete but has |
|
not yet been fully tested. |
|
|
|
config ARCH_BOARD_NTOSD_DM320 |
|
bool "Neuros OSD v1.0 Dev Board" |
|
depends on ARCH_CHIP_DM320 |
|
---help--- |
|
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf |
|
toolchain*: see |
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_1.0_Developer_Home |
|
|
|
There are some differences between the Dev Board and the currently |
|
available commercial v1.0 Boards. See |
|
|
|
http://wiki.neurostechnology.com/index.php/OSD_Developer_Board_v1 |
|
|
|
NuttX operates on the ARM9EJS of this dual core processor. |
|
STATUS: This port is code complete, verified, and included in the |
|
NuttX 0.2.1 release. |
|
|
|
config ARCH_BOARD_NUCLEUS2G |
|
bool "Nucleus 2G board" |
|
depends on ARCH_CHIP_LPC1768 |
|
---help--- |
|
This port uses the Nucleus 2G board (with Babel CAN board). This board |
|
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/) |
|
for more information about the Nucleus 2G. |
|
|
|
config ARCH_BOARD_LPC1766STK |
|
bool "Olimex LPC1766-STK board" |
|
depends on ARCH_CHIP_LPC1766 |
|
---help--- |
|
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under |
|
Linux or Cygwin. STATUS: Complete and mature. |
|
|
|
config ARCH_BOARD_MIRTOO |
|
bool "Mirtoo PIC32 Module from Dimitech" |
|
depends on ARCH_CHIP_PIC32MX250F128D |
|
---help--- |
|
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip |
|
PIC32MX250F128D. See http://www.dimitech.com/ for further information. |
|
|
|
config ARCH_BOARD_OLIMEXLPC2378 |
|
bool "Olimex-lpc2378 board" |
|
depends on ARCH_CHIP_LPC2378 |
|
---help--- |
|
This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under |
|
Linux or Cygwin. STATUS: ostest and NSH configurations available. |
|
This port for the NXP LPC2378 was contributed by Rommel Marcelo. |
|
|
|
config ARCH_BOARD_OLIMEX_STRP711 |
|
bool "Olimex STR-P711 board" |
|
depends on ARCH_CHIP_STR71X |
|
---help--- |
|
This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under |
|
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for |
|
further information. STATUS: Configurations for the basic OS test and NSH |
|
are complete and verified. |
|
|
|
config ARCH_BOARD_PCBLOGICPIC32MX |
|
bool "PIC32MX board from PCB Logic Design Co" |
|
depends on ARCH_CHIP_PIC32MX460F512L |
|
---help--- |
|
This is the port of NuttX to the PIC32MX board from PCB Logic Design Co. |
|
This board features the MicroChip PIC32MX460F512L. |
|
The board is a very simple -- little more than a carrier for the PIC32 |
|
MCU plus voltage regulation, debug interface, and an OTG connector. |
|
STATUS: Code complete but testing has been stalled due to tool related problems |
|
(PICkit 2 does not work with the PIC32). |
|
|
|
config ARCH_BOARD_PIC32_STARTERKIT |
|
bool "Microchip PIC32 Ethernet Starter Kit (DM320004)" |
|
depends on ARCH_CHIP_PIC32MX795F512L |
|
---help--- |
|
This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit |
|
(DM320004) with the Multimedia Expansion Board (MEB, DM320005). |
|
See www.microchip.com for further information. |
|
|
|
config ARCH_BOARD_PIC32_PIC32MX7MMB |
|
bool "Mikroelektronika PIC32MX7 MMB" |
|
depends on ARCH_CHIP_PIC32MX795F512L |
|
---help--- |
|
This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board |
|
(MMB). See http://www.mikroe.com/ for further information. |
|
|
|
config ARCH_BOARD_PJRC_87C52 |
|
bool "PJRC 87C52 development system" |
|
depends on ARCH_CHIP_8052 |
|
---help--- |
|
8051 Microcontroller. This port uses the PJRC 87C52 development system |
|
and the SDCC toolchain. This port is not quite ready for prime time. |
|
|
|
config ARCH_BOARD_QEMU_I486 |
|
bool "Qemu i486 Mode" |
|
depends on ARCH_QEMU |
|
---help--- |
|
Port of NuttX to QEMU in i486 mode. This port will also run on real i486 |
|
hardwared (Google the Bifferboard). |
|
|
|
config ARCH_BOARD_RGMP |
|
bool "RGMP" |
|
depends on ARCH_RGMP |
|
---help--- |
|
RGMP stands for RTOS and GPOS on Multi-Processor. RGMP is a project for |
|
running GPOS and RTOS simultaneously on multi-processor platforms. You can |
|
port your favorite RTOS to RGMP together with an unmodified Linux to form a |
|
hybrid operating system. This makes your application able to use both RTOS |
|
and GPOS features. |
|
|
|
See http://rgmp.sourceforge.net/wiki/index.php/Main_Page for further information |
|
about RGMP. |
|
|
|
config ARCH_BOARD_SAM3UEK |
|
bool "Atmel SAM3U-EK development board" |
|
depends on ARCH_CHIP_AT91SAM3U4E |
|
---help--- |
|
The port of NuttX to the Atmel SAM3U-EK development board. |
|
|
|
config ARCH_BOARD_SKP16C26 |
|
bool "Renesas SKP16C26 StarterKit" |
|
depends on ARCH_CHIP_M30262F8 |
|
---help--- |
|
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port |
|
uses the GNU m32c toolchain. STATUS: The port is complete but untested |
|
due to issues with compiler internal errors. |
|
|
|
config ARCH_BOARD_STM3210E_EVAL |
|
bool "STMicro STM3210E-EVAL development board" |
|
depends on ARCH_CHIP_STM32F103ZET6 |
|
---help--- |
|
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6 |
|
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3 |
|
toolchain. |
|
|
|
config ARCH_BOARD_STM3220G_EVAL |
|
bool "STMicro STM3220G-EVAL development board" |
|
depends on ARCH_CHIP_STM32F207IG |
|
---help--- |
|
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG |
|
microcontroller (ARM Cortex-M3). |
|
|
|
config ARCH_BOARD_STM3240G_EVAL |
|
bool "STMicro STM3240G-EVAL development board" |
|
depends on ARCH_CHIP_STM32F407IG |
|
---help--- |
|
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6 |
|
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4 |
|
toolchain (such as CodeSourcery). |
|
|
|
config ARCH_BOARD_STM32F4_DISCOVERY |
|
bool "STMicro STM32F4-Discovery board" |
|
depends on ARCH_CHIP_STM32F407VG |
|
---help--- |
|
STMicro STM32F4-Discovery board boased on the STMIcro STM32F407VGT6 MCU. |
|
|
|
config ARCH_BOARD_SUREPIC32MX |
|
bool "Sure PIC32MX boards" |
|
depends on ARCH_CHIP_PIC32MX440F512H |
|
---help--- |
|
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure |
|
Electronics (http://www.sureelectronics.net/). This board features |
|
the MicroChip PIC32MX440F512H. See also |
|
http://www.sureelectronics.net/goods.php?id=1168 for further |
|
information about the Sure DB-DP11215 board. |
|
|
|
config ARCH_BOARD_TEENSY |
|
bool "PJRC Teensy++ 2.0 board" |
|
depends on ARCH_CHIP_AT90USB1286 |
|
---help--- |
|
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is |
|
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based |
|
on an Atmel AT90USB1286 MCU. |
|
|
|
config ARCH_BOARD_TWR_K60N512 |
|
bool "FreeScale TWR-K60N512d evelopment board" |
|
depends on ARCH_CHIP_MK60N512VMD100 |
|
---help--- |
|
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512 |
|
development board. |
|
|
|
config ARCH_BOARD_UBW32 |
|
bool "UBW32 v2.4 board from Sparkfun" |
|
depends on ARCH_CHIP_PIC32MX460F512L |
|
---help--- |
|
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4 |
|
board which is based on the MicroChip PIC32MX460F512L. See |
|
http://www.sparkfun.com/products/8971. This older version has been replaced |
|
with this board http://www.sparkfun.com/products/9713. See also |
|
http://www.schmalzhaus.com/UBW32/. |
|
|
|
config ARCH_BOARD_US7032EVB1 |
|
bool "Hitachi SH-1/US7032EVB1 board" |
|
depends on ARCH_CHIP_SH7032 |
|
---help--- |
|
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board. |
|
STATUS: Work has just began on this port. |
|
|
|
config ARCH_BOARD_VSN |
|
bool "SOTEL NetClamps VSN sensor network platform" |
|
depends on ARCH_CHIP_STM32F103RET6 |
|
---help--- |
|
ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the |
|
STMicro STM32F103RET6. Contributed by Uros Platise. See |
|
http://isotel.eu/NetClamps/ |
|
|
|
config ARCH_BOARD_XTRS |
|
bool "XTRS TRS80 Model 3 emulation" |
|
depends on ARCH_CHIP_Z80 |
|
---help--- |
|
TRS80 Model 3. This port uses a vintage computer based on the Z80. |
|
An emulator for this computer is available to run TRS80 programs on a |
|
linux platform (http://www.tim-mann.org/xtrs.html). |
|
|
|
config ARCH_BOARD_Z16F2800100ZCOG |
|
bool "Zilog Z16F2800100ZCOG Development Kit" |
|
depends on ARCH_CHIP_Z16F281 |
|
---help--- |
|
z16f Microcontroller. This port use the ZiLIG z16f2800100zcog |
|
development kit and the Zilog ZDS-II Windows command line tools. The |
|
development environment is Cygwin under WinXP. |
|
|
|
config ARCH_BOARD_Z80SIM |
|
bool "Z80 Instruction Set Simulator" |
|
depends on ARCH_CHIP_Z80 |
|
---help--- |
|
z80 Microcontroller. This port uses a Z80 instruction set simulator. |
|
That simulator can be found in the NuttX SVN at |
|
http://nuttx.svn.sourceforge.net/viewvc/nuttx/trunk/misc/sims/z80sim. |
|
This port also uses the SDCC toolchain (http://sdcc.sourceforge.net/") |
|
(verified with version 2.6.0). |
|
|
|
config ARCH_BOARD_Z8ENCORE000ZCO |
|
bool "ZiLOG z8encore000zco Development Kit" |
|
depends on ARCH_CHIP_Z8F6403 |
|
---help--- |
|
z8Encore! Microcontroller. This port use the ZiLOG z8encore000zco |
|
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line |
|
tools. The development environment is Cygwin under WinXP. |
|
|
|
config ARCH_BOARD_Z8F64200100KI |
|
bool "ZiLOG Z8F64200100KIT Development Kit" |
|
depends on ARCH_CHIP_Z8F642X |
|
---help--- |
|
z8Encore! Microcontroller. This port use the Zilog z8f64200100kit |
|
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line |
|
tools. The development environment is Cygwin under WinXP. |
|
|
|
config ARCH_BOARD_SIM |
|
bool "User mode simulation" |
|
depends on ARCH_SIM |
|
---help--- |
|
A user-mode port of NuttX to the x86 Linux/Cygwin platform is available. |
|
The purpose of this port is primarily to support OS feature development. |
|
This port does not support interrupts or a real timer (and hence no |
|
round robin scheduler) Otherwise, it is complete. |
|
|
|
config ARCH_BOARD_CUSTOM |
|
bool "Custom development board" |
|
---help--- |
|
Select this option if there is no directory for the board under configs/. |
|
|
|
Don't see the board you want? You must first select the exact MCU part |
|
number, then the boards supporting that part will be available for selection. |
|
|
|
endchoice |
|
|
|
config ARCH_BOARD |
|
string |
|
default "amber" if ARCH_BOARD_AMBER |
|
default "avr32dev1" if ARCH_BOARD_AVR32DEV1 |
|
default "c5471evm" if ARCH_BOARD_C5471EVM |
|
default "compal_e88" if ARCH_BOARD_COMPALE88 |
|
default "compal_e99" if ARCH_BOARD_COMPALE99 |
|
default "demo9s12ne64" if ARCH_BOARD_DEMOS92S12NEC64 |
|
default "ea3131" if ARCH_BOARD_EA3131 |
|
default "ea3152" if ARCH_BOARD_EA3152 |
|
default "eagle100" if ARCH_BOARD_EAGLE100 |
|
default "ekk-lm3s9b96" if ARCH_BOARD_EKK_LM3S9B96 |
|
default "ez80f0910200kitg" if ARCH_BOARD_EZ80F910200KITG |
|
default "ez80f0910200zco" if ARCH_BOARD_EZ80F910200ZCO |
|
default "hymini-stm32v" if ARCH_BOARD_HYMINI_STM32V |
|
default "kwikstik-k40" if ARCH_BOARD_KWIKSTIK_K40 |
|
default "lincoln60" if ARCH_BOARD_LINCOLN60 |
|
default "lm3s6432-s2e" if ARCH_BOARD_LM3S6432S2E |
|
default "lm3s6965-ek" if ARCH_BOARD_LM3S6965EK |
|
default "lm3s8962-ek" if ARCH_BOARD_LM3S8962EK |
|
default "lpc4330-xplorer" if ARCH_BOARD_LPC4330_XPLORER |
|
default "lpcxpresso-lpc1768" if ARCH_BOARD_LPCXPRESSO |
|
default "m68322evb" if ARCH_BOARD_M68332EVB |
|
default "mbed" if ARCH_BOARD_MBED |
|
default "mcu123-lpc214x" if ARCH_BOARD_MCU123 |
|
default "micropendous3" if ARCH_BOARD_MICROPENDOUS3 |
|
default "mirtoo" if ARCH_BOARD_MIRTOO |
|
default "mx1ads" if ARCH_BOARD_MX1ADS |
|
default "ne64badge" if ARCH_BOARD_NE64BADGE |
|
default "ntosd-dm320" if ARCH_BOARD_NTOSD_DM320 |
|
default "nucleus2g" if ARCH_BOARD_NUCLEUS2G |
|
default "olimex-lpc1766stk" if ARCH_BOARD_LPC1766STK |
|
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378 |
|
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711 |
|
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX |
|
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT |
|
default "pic32mx7mmb" if ARCH_BOARD_PIC32_PIC32MX7MMB |
|
default "pjrc-8051" if ARCH_BOARD_PJRC_87C52 |
|
default "qemu-i486" if ARCH_BOARD_QEMU_I486 |
|
default "rgmp" if ARCH_BOARD_RGMP |
|
default "sam3u-ek" if ARCH_BOARD_SAM3UEK |
|
default "skp16c26" if ARCH_BOARD_SKP16C26 |
|
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL |
|
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL |
|
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL |
|
default "stm32f4discovery" if ARCH_BOARD_STM32F4_DISCOVERY |
|
default "sure-pic32mx" if ARCH_BOARD_SUREPIC32MX |
|
default "teensy" if ARCH_BOARD_TEENSY |
|
default "twr-k60n512" if ARCH_BOARD_TWR_K60N512 |
|
default "ubw32" if ARCH_BOARD_UBW32 |
|
default "us7032evb1" if ARCH_BOARD_US7032EVB1 |
|
default "vsn" if ARCH_BOARD_VSN |
|
default "xtrs" if ARCH_BOARD_XTRS |
|
default "z16f2800100zcog" if ARCH_BOARD_Z16F2800100ZCOG |
|
default "z80sim" if ARCH_BOARD_Z80SIM |
|
default "z8encore000zco" if ARCH_BOARD_Z8ENCORE000ZCO |
|
default "z8f64200100kit" if ARCH_BOARD_Z8F64200100KI |
|
default "sim" if ARCH_BOARD_SIM |
|
default "" if ARCH_BOARD_CUSTOM |
|
|
|
if ARCH_BOARD_AMBER |
|
source "configs/amber/Kconfig" |
|
endif |
|
if ARCH_BOARD_AVR32DEV1 |
|
source "configs/avr32dev1/Kconfig" |
|
endif |
|
if ARCH_BOARD_C5471EVM |
|
source "configs/c5471evm/Kconfig" |
|
endif |
|
if ARCH_BOARD_COMPALE88 |
|
source "configs/compal_e88/Kconfig" |
|
endif |
|
if ARCH_BOARD_COMPALE99 |
|
source "configs/compal_e99/Kconfig" |
|
endif |
|
if ARCH_BOARD_DEMOS92S12NEC64 |
|
source "configs/demo9s12ne64/Kconfig" |
|
endif |
|
if ARCH_BOARD_EA3131 |
|
source "configs/ea3131/Kconfig" |
|
endif |
|
if ARCH_BOARD_EA3152 |
|
source "configs/ea3152/Kconfig" |
|
endif |
|
if ARCH_BOARD_EAGLE100 |
|
source "configs/eagle100/Kconfig" |
|
endif |
|
if ARCH_BOARD_EKK_LM3S9B96 |
|
source "configs/ekk-lm3s9b96/Kconfig" |
|
endif |
|
if ARCH_BOARD_EZ80F910200KITG |
|
source "configs/ez80f910200kitg/Kconfig" |
|
endif |
|
if ARCH_BOARD_EZ80F910200ZCO |
|
source "configs/ez80f910200zco/Kconfig" |
|
endif |
|
if ARCH_BOARD_HYMINI_STM32V |
|
source "configs/hymini-stm32v/Kconfig" |
|
endif |
|
if ARCH_BOARD_KWIKSTIK_K40 |
|
source "configs/kwikstik-k40/Kconfig" |
|
endif |
|
if ARCH_BOARD_LINCOLN60 |
|
source "configs/lincoln60/Kconfig" |
|
endif |
|
if ARCH_BOARD_LM3S6432S2E |
|
source "configs/lm3s6432-s2e/Kconfig" |
|
endif |
|
if ARCH_BOARD_LM3S6965EK |
|
source "configs/lm3s6965-ek/Kconfig" |
|
endif |
|
if ARCH_BOARD_LM3S8962EK |
|
source "configs/lm3s8962-ek/Kconfig" |
|
endif |
|
if ARCH_BOARD_LPC4330_XPLORER |
|
source "configs/lpc4330-xplorer/Kconfig" |
|
endif |
|
if ARCH_BOARD_LPCXPRESSO |
|
source "configs/lpcxpresso-lpc1768/Kconfig" |
|
endif |
|
if ARCH_BOARD_M68332EVB |
|
source "configs/m68332evb/Kconfig" |
|
endif |
|
if ARCH_BOARD_MBED |
|
source "configs/mbed/Kconfig" |
|
endif |
|
if ARCH_BOARD_MCU123 |
|
source "configs/mcu123-lpc214x/Kconfig" |
|
endif |
|
if ARCH_BOARD_MICROPENDOUS3 |
|
source "configs/micropendous3/Kconfig" |
|
endif |
|
if ARCH_BOARD_MIRTOO |
|
source "configs/mirtoo/Kconfig" |
|
endif |
|
if ARCH_BOARD_MX1ADS |
|
source "configs/mx1ads/Kconfig" |
|
endif |
|
if ARCH_BOARD_NE64BADGE |
|
source "configs/ne64badge/Kconfig" |
|
endif |
|
if ARCH_BOARD_NTOSD_DM320 |
|
source "configs/ntosd-dm320/Kconfig" |
|
endif |
|
if ARCH_BOARD_NUCLEUS2G |
|
source "configs/nucleus2g/Kconfig" |
|
endif |
|
if ARCH_BOARD_LPC1766STK |
|
source "configs/olimex-lpc1766stk/Kconfig" |
|
endif |
|
if ARCH_BOARD_OLIMEXLPC2378 |
|
source "configs/olimex-lpc2378/Kconfig" |
|
endif |
|
if ARCH_BOARD_OLIMEX_STRP711 |
|
source "configs/olimex-strp711/Kconfig" |
|
endif |
|
if ARCH_BOARD_PCBLOGICPIC32MX |
|
source "configs/pcblogic-pic32mx/Kconfig" |
|
endif |
|
if ARCH_BOARD_PIC32_STARTERKIT |
|
source "configs/pic32-starterkit/Kconfig" |
|
endif |
|
if ARCH_BOARD_PIC32_PIC32MX7MMB |
|
source "configs/pic32mx7mmb/Kconfig" |
|
endif |
|
if ARCH_BOARD_PJRC_87C52 |
|
source "configs/pjrc-8051/Kconfig" |
|
endif |
|
if ARCH_BOARD_QEMU_I486 |
|
source "configs/qemu-i486/Kconfig" |
|
endif |
|
if ARCH_BOARD_RGMP |
|
source "configs/rgmp/Kconfig" |
|
endif |
|
if ARCH_BOARD_SAM3UEK |
|
source "configs/sam3u-ek/Kconfig" |
|
endif |
|
if ARCH_BOARD_SKP16C26 |
|
source "configs/skp16c26/Kconfig" |
|
endif |
|
if ARCH_BOARD_STM3210E_EVAL |
|
source "configs/stm3210e-eval/Kconfig" |
|
endif |
|
if ARCH_BOARD_STM3220G_EVAL |
|
source "configs/stm3220g-eval/Kconfig" |
|
endif |
|
if ARCH_BOARD_STM3240G_EVAL |
|
source "configs/stm3240g-eval/Kconfig" |
|
endif |
|
if ARCH_BOARD_STM32F4_DISCOVERY |
|
source "configs/stm32f4discovery/Kconfig" |
|
endif |
|
if ARCH_BOARD_SUREPIC32MX |
|
source "configs/sure-pic32mx/Kconfig" |
|
endif |
|
if ARCH_BOARD_TEENSY |
|
source "configs/teensy/Kconfig" |
|
endif |
|
if ARCH_BOARD_TWR_K60N512 |
|
source "configs/twr-k60n512/Kconfig" |
|
endif |
|
if ARCH_BOARD_UBW32 |
|
source "configs/ubw32/Kconfig" |
|
endif |
|
if ARCH_BOARD_US7032EVB1 |
|
source "configs/us7032evb1/Kconfig" |
|
endif |
|
if ARCH_BOARD_VSN |
|
source "configs/vsn/Kconfig" |
|
endif |
|
if ARCH_BOARD_XTRS |
|
source "configs/xtrs/Kconfig" |
|
endif |
|
if ARCH_BOARD_Z16F2800100ZCOG |
|
source "configs/z16f2800100zcog/Kconfig" |
|
endif |
|
if ARCH_BOARD_Z80SIM |
|
source "configs/z80sim/Kconfig" |
|
endif |
|
if ARCH_BOARD_Z8ENCORE000ZCO |
|
source "configs/z8encore000zco/Kconfig" |
|
endif |
|
if ARCH_BOARD_Z8F64200100KI |
|
source "configs/z8f64200100kit/Kconfig" |
|
endif |
|
if ARCH_BOARD_SIM |
|
source "configs/sim/Kconfig" |
|
endif
|
|
|