You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
23 lines
1.3 KiB
23 lines
1.3 KiB
# This is similar to the mavlink message CONTROL_SYSTEM_STATE, but for onboard use */ |
|
uint8 AIRSPD_MODE_MEAS = 0 # airspeed is measured airspeed from sensor |
|
uint8 AIRSPD_MODE_EST = 1 # airspeed is estimated by body velocity |
|
uint8 AIRSPD_MODE_DISABLED = 2 # airspeed is disabled |
|
|
|
float32 x_acc # X acceleration in body frame |
|
float32 y_acc # Y acceleration in body frame |
|
float32 z_acc # Z acceleration in body frame |
|
float32 x_vel # X velocity in body frame |
|
float32 y_vel # Y velocity in body frame |
|
float32 z_vel # Z velocity in body frame |
|
float32 x_pos # X position in local earth frame |
|
float32 y_pos # Y position in local earth frame |
|
float32 z_pos # z position in local earth frame |
|
float32 airspeed # Airspeed, estimated |
|
bool airspeed_valid # False: Non-finite values or non-updating sensor |
|
float32[3] vel_variance # Variance in body velocity estimate |
|
float32[3] pos_variance # Variance in local position estimate |
|
float32[4] q # Attitude Quaternion |
|
float32 roll_rate # Roll body angular rate (rad/s, x forward/y right/z down) |
|
float32 pitch_rate # Pitch body angular rate (rad/s, x forward/y right/z down) |
|
float32 yaw_rate # Yaw body angular rate (rad/s, x forward/y right/z down) |
|
float32 horz_acc_mag # low pass filtered magnitude of the horizontal acceleration
|
|
|