You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
113 lines
5.1 KiB
113 lines
5.1 KiB
/**************************************************************************** |
|
* drivers/wireless/cc1101/ISM1_868MHzGFSK100kbps.c |
|
* |
|
* Copyright (C) 2011 Uros Platise. All rights reserved. |
|
* Copyright (C) 2011 Ales Verbic. All rights reserved. |
|
* |
|
* Authors: Uros Platise <uros.platise@isotel.eu> |
|
* Ales Verbic <ales.verbic@isotel.eu> |
|
* |
|
* Redistribution and use in source and binary forms, with or without |
|
* modification, are permitted provided that the following conditions |
|
* are met: |
|
* |
|
* 1. Redistributions of source code must retain the above copyright |
|
* notice, this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright |
|
* notice, this list of conditions and the following disclaimer in |
|
* the documentation and/or other materials provided with the |
|
* distribution. |
|
* 3. Neither the name NuttX nor the names of its contributors may be |
|
* used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
|
* POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************/ |
|
|
|
#include <nuttx/wireless/cc1101.h> |
|
|
|
/** Settings for 868 MHz, GFSK at 100kbps |
|
* |
|
* ISM Region 1 (Europe) only, Band 868–870 MHz |
|
* |
|
* Frequency ERP Duty Cycle Bandwidth Remarks |
|
* 868 – 868.6 MHz +14 dBm < 1% No limits |
|
* 868.7 – 869.2 MHz +14 dBm < 0.1% No limits |
|
* 869.3 – 869.4 MHz +10 dBm No limits < 25 kHz Appropriate access protocol required |
|
* 869.4 – 869.65 MHz +27 dBm < 10% < 25 kHz Channels may be combined to one high speed channel |
|
* 869.7 -870 MHz +7 dBm No limits No limits |
|
* |
|
* Deviation = 46.142578 |
|
* Base frequency = 867.999985 |
|
* Carrier frequency = 867.999985 |
|
* Channel number = 0 |
|
* Carrier frequency = 867.999985 |
|
* Modulated = true |
|
* Modulation format = GFSK |
|
* Manchester enable = false |
|
* Sync word qualifier mode = 30/32 sync word bits detected |
|
* Preamble count = 4 |
|
* Channel spacing = 199.813843 |
|
* Carrier frequency = 867.999985 |
|
* Data rate = 99.9069 |
|
* RX filter BW = 210.937500 |
|
* Data format = Normal mode |
|
* Length config = Fixed packet length mode. Length configured in PKTLEN register |
|
* CRC enable = true |
|
* Packet length = 62 |
|
* Device address = 00 |
|
* Address config = NO Address check, no broadcast |
|
* CRC autoflush = true |
|
* PA ramping = false |
|
* TX power = 0 |
|
*/ |
|
const struct c1101_rfsettings_s cc1101_rfsettings_ISM1_868MHzGFSK100kbps = { |
|
.FSCTRL1 = 0x08, // FSCTRL1 Frequency Synthesizer Control |
|
.FSCTRL0 = 0x00, // FSCTRL0 Frequency Synthesizer Control |
|
|
|
.FREQ2 = 0x20, // FREQ2 Frequency Control Word, High Byte |
|
.FREQ1 = 0x25, // FREQ1 Frequency Control Word, Middle Byte |
|
.FREQ0 = 0xED, // FREQ0 Frequency Control Word, Low Byte |
|
|
|
.MDMCFG4 = 0x8B, // MDMCFG4 Modem Configuration |
|
.MDMCFG3 = 0xE5, // MDMCFG3 Modem Configuration |
|
.MDMCFG2 = 0x13, // MDMCFG2 Modem Configuration |
|
.MDMCFG1 = 0x22, // MDMCFG1 Modem Configuration |
|
.MDMCFG0 = 0xE5, // MDMCFG0 Modem Configuration |
|
|
|
.DEVIATN = 0x46, // DEVIATN Modem Deviation Setting |
|
|
|
.FOCCFG = 0x1D, // FOCCFG Frequency Offset Compensation Configuration |
|
|
|
.BSCFG = 0x1C, // BSCFG Bit Synchronization Configuration |
|
|
|
.AGCCTRL2= 0xC7, // AGCCTRL2 AGC Control |
|
.AGCCTRL1= 0x00, // AGCCTRL1 AGC Control |
|
.AGCCTRL0= 0xB2, // AGCCTRL0 AGC Control |
|
|
|
.FREND1 = 0xB6, // FREND1 Front End RX Configuration |
|
.FREND0 = 0x10, // FREND0 Front End TX Configuration |
|
|
|
.FSCAL3 = 0xEA, // FSCAL3 Frequency Synthesizer Calibration |
|
.FSCAL2 = 0x2A, // FSCAL2 Frequency Synthesizer Calibration |
|
.FSCAL1 = 0x00, // FSCAL1 Frequency Synthesizer Calibration |
|
.FSCAL0 = 0x1F, // FSCAL0 Frequency Synthesizer Calibration |
|
|
|
.CHMIN = 0, // Fix at 9th channel: 869.80 MHz +- 100 kHz RF Bandwidth |
|
.CHMAX = 9, // single channel |
|
|
|
.PAMAX = 8, // 0 means power OFF, 8 represents PA[7] |
|
.PA = {0x03, 0x0F, 0x1E, 0x27, 0x67, 0x50, 0x81, 0xC2} |
|
};
|
|
|