You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
113 lines
2.3 KiB
113 lines
2.3 KiB
#!nsh |
|
|
|
# |
|
# Load default params for this platform |
|
# |
|
if param compare SYS_AUTOCONFIG 1 |
|
then |
|
# Set all params here, then disable autoconfig |
|
param set SYS_AUTOCONFIG 0 |
|
|
|
param set MC_ATTRATE_D 0.002 |
|
param set MC_ATTRATE_I 0.0 |
|
param set MC_ATTRATE_P 0.09 |
|
param set MC_ATT_D 0.0 |
|
param set MC_ATT_I 0.0 |
|
param set MC_ATT_P 6.8 |
|
param set MC_YAWPOS_D 0.0 |
|
param set MC_YAWPOS_I 0.0 |
|
param set MC_YAWPOS_P 2.0 |
|
param set MC_YAWRATE_D 0.005 |
|
param set MC_YAWRATE_I 0.2 |
|
param set MC_YAWRATE_P 0.3 |
|
param set NAV_TAKEOFF_ALT 3.0 |
|
param set MPC_TILT_MAX 0.5 |
|
param set MPC_THR_MAX 0.7 |
|
param set MPC_THR_MIN 0.3 |
|
param set MPC_XY_D 0 |
|
param set MPC_XY_P 0.5 |
|
param set MPC_XY_VEL_D 0 |
|
param set MPC_XY_VEL_I 0 |
|
param set MPC_XY_VEL_MAX 3 |
|
param set MPC_XY_VEL_P 0.2 |
|
param set MPC_Z_D 0 |
|
param set MPC_Z_P 1 |
|
param set MPC_Z_VEL_D 0 |
|
param set MPC_Z_VEL_I 0.1 |
|
param set MPC_Z_VEL_MAX 2 |
|
param set MPC_Z_VEL_P 0.20 |
|
|
|
param save |
|
fi |
|
|
|
# |
|
# Force some key parameters to sane values |
|
# MAV_TYPE 2 = quadrotor |
|
# |
|
param set MAV_TYPE 2 |
|
|
|
set EXIT_ON_END no |
|
|
|
# |
|
# Start the Mikrokopter ESC driver |
|
# |
|
if [ $MKBLCTRL_MODE == yes ] |
|
then |
|
if [ $MKBLCTRL_FRAME == x ] |
|
then |
|
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing" |
|
mkblctrl -mkmode x |
|
else |
|
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing" |
|
mkblctrl -mkmode + |
|
fi |
|
else |
|
if [ $MKBLCTRL_FRAME == x ] |
|
then |
|
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame" |
|
else |
|
echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame" |
|
fi |
|
mkblctrl |
|
fi |
|
|
|
usleep 10000 |
|
|
|
# |
|
# Start and configure PX4IO or FMU interface |
|
# |
|
if px4io detect |
|
then |
|
# Start MAVLink (depends on orb) |
|
mavlink start |
|
usleep 5000 |
|
|
|
sh /etc/init.d/rc.io |
|
else |
|
# Start MAVLink (on UART1 / ttyS0) |
|
mavlink start -d /dev/ttyS0 |
|
usleep 5000 |
|
fmu mode_pwm |
|
param set BAT_V_SCALING 0.004593 |
|
set EXIT_ON_END yes |
|
fi |
|
|
|
# |
|
# Load mixer |
|
# |
|
if [ $MKBLCTRL_FRAME == x ] |
|
then |
|
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_x.mix |
|
else |
|
mixer load /dev/mkblctrl /etc/mixers/FMU_quad_+.mix |
|
fi |
|
|
|
# |
|
# Start common for all multirotors apps |
|
# |
|
sh /etc/init.d/rc.multirotor |
|
|
|
if [ $EXIT_ON_END == yes ] |
|
then |
|
exit |
|
fi
|
|
|