You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
52 lines
2.0 KiB
52 lines
2.0 KiB
uint64 timestamp # time since system start (microseconds) |
|
|
|
uint64 timestamp_sample # the timestamp of the raw data (microseconds) |
|
|
|
uint8 SOURCE_UNKNOWN = 0 |
|
uint8 SOURCE_RC = 1 # radio control (input_rc) |
|
uint8 SOURCE_MAVLINK_0 = 2 # mavlink instance 0 |
|
uint8 SOURCE_MAVLINK_1 = 3 # mavlink instance 1 |
|
uint8 SOURCE_MAVLINK_2 = 4 # mavlink instance 2 |
|
uint8 SOURCE_MAVLINK_3 = 5 # mavlink instance 3 |
|
uint8 SOURCE_MAVLINK_4 = 6 # mavlink instance 4 |
|
uint8 SOURCE_MAVLINK_5 = 7 # mavlink instance 5 |
|
|
|
uint8 data_source |
|
|
|
# Any of the channels may not be available and be set to NaN |
|
# to indicate that it does not contain valid data. |
|
# The variable names follow the definition of the |
|
# MANUAL_CONTROL mavlink message. |
|
# The default range is from -1 to 1 (mavlink message -1000 to 1000) |
|
# The range for the z variable is defined from 0 to 1. (The z field of |
|
# the MANUAL_CONTROL mavlink message is defined from -1000 to 1000) |
|
|
|
float32 x # stick position in x direction -1..1 |
|
# in general corresponds to forward/back motion or pitch of vehicle, |
|
# in general a positive value means forward or negative pitch and |
|
# a negative value means backward or positive pitch |
|
|
|
float32 y # stick position in y direction -1..1 |
|
# in general corresponds to right/left motion or roll of vehicle, |
|
# in general a positive value means right or positive roll and |
|
# a negative value means left or negative roll |
|
|
|
float32 z # throttle stick position 0..1 |
|
# in general corresponds to up/down motion or thrust of vehicle, |
|
# in general the value corresponds to the demanded throttle by the user, |
|
# if the input is used for setting the setpoint of a vertical position |
|
# controller any value > 0.5 means up and any value < 0.5 means down |
|
|
|
float32 r # yaw stick/twist position, -1..1 |
|
# in general corresponds to the righthand rotation around the vertical |
|
# (downwards) axis of the vehicle |
|
|
|
float32 flaps # flap position |
|
|
|
float32 aux1 |
|
float32 aux2 |
|
float32 aux3 |
|
float32 aux4 |
|
float32 aux5 |
|
float32 aux6 |
|
|
|
|