You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1662 lines
54 KiB
1662 lines
54 KiB
/**************************************************************************** |
|
* |
|
* Copyright (C) 2012 PX4 Development Team. All rights reserved. |
|
* Author: @author Lorenz Meier <lm@inf.ethz.ch> |
|
* |
|
* Redistribution and use in source and binary forms, with or without |
|
* modification, are permitted provided that the following conditions |
|
* are met: |
|
* |
|
* 1. Redistributions of source code must retain the above copyright |
|
* notice, this list of conditions and the following disclaimer. |
|
* 2. Redistributions in binary form must reproduce the above copyright |
|
* notice, this list of conditions and the following disclaimer in |
|
* the documentation and/or other materials provided with the |
|
* distribution. |
|
* 3. Neither the name PX4 nor the names of its contributors may be |
|
* used to endorse or promote products derived from this software |
|
* without specific prior written permission. |
|
* |
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS |
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED |
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
|
* POSSIBILITY OF SUCH DAMAGE. |
|
* |
|
****************************************************************************/ |
|
|
|
/** |
|
* @file mavlink.c |
|
* MAVLink 1.0 protocol implementation. |
|
*/ |
|
|
|
#include <nuttx/config.h> |
|
#include <unistd.h> |
|
#include <pthread.h> |
|
#include <stdio.h> |
|
#include <math.h> |
|
#include <stdbool.h> |
|
#include <fcntl.h> |
|
#include <mqueue.h> |
|
#include <string.h> |
|
#include "mavlink_bridge_header.h" |
|
#include <v1.0/common/mavlink.h> |
|
#include <arch/board/up_hrt.h> |
|
#include <time.h> |
|
#include <float.h> |
|
#include <unistd.h> |
|
#include <nuttx/sched.h> |
|
#include <sys/prctl.h> |
|
#include <termios.h> |
|
#include <errno.h> |
|
#include <stdlib.h> |
|
#include <poll.h> |
|
#include <uORB/uORB.h> |
|
#include <uORB/topics/sensor_combined.h> |
|
#include <uORB/topics/rc_channels.h> |
|
#include <uORB/topics/ardrone_control.h> |
|
#include <uORB/topics/fixedwing_control.h> |
|
#include <uORB/topics/vehicle_attitude.h> |
|
#include <uORB/topics/vehicle_gps_position.h> |
|
#include <uORB/topics/vehicle_global_position.h> |
|
#include <uORB/topics/vehicle_status.h> |
|
#include <uORB/topics/ardrone_motors_setpoint.h> |
|
#include <uORB/topics/vehicle_command.h> |
|
#include <uORB/topics/vehicle_local_position_setpoint.h> |
|
#include <uORB/topics/vehicle_global_position_setpoint.h> |
|
#include <uORB/topics/vehicle_attitude_setpoint.h> |
|
#include <uORB/topics/optical_flow.h> |
|
#include <uORB/topics/actuator_outputs.h> |
|
#include <uORB/topics/manual_control_setpoint.h> |
|
#include <systemlib/param/param.h> |
|
|
|
#include "waypoints.h" |
|
#include "mavlink_log.h" |
|
|
|
/* define MAVLink specific parameters */ |
|
PARAM_DEFINE_INT32(MAV_SYS_ID, 1); |
|
PARAM_DEFINE_INT32(MAV_COMP_ID, 50); |
|
PARAM_DEFINE_INT32(MAV_TYPE, MAV_TYPE_GENERIC); |
|
|
|
__EXPORT int mavlink_main(int argc, char *argv[]); |
|
int mavlink_thread_main(int argc, char *argv[]); |
|
|
|
static bool thread_should_exit = false; |
|
static bool thread_running = false; |
|
static int mavlink_task; |
|
|
|
/* terminate MAVLink on user request - disabled by default */ |
|
static bool mavlink_link_termination_allowed = false; |
|
|
|
mavlink_system_t mavlink_system = {100, 50, MAV_TYPE_FIXED_WING, 0, 0, 0}; // System ID, 1-255, Component/Subsystem ID, 1-255 |
|
static uint8_t chan = MAVLINK_COMM_0; |
|
static mavlink_status_t status; |
|
|
|
/* pthreads */ |
|
static pthread_t receive_thread; |
|
static pthread_t uorb_receive_thread; |
|
|
|
/* Allocate storage space for waypoints */ |
|
mavlink_wpm_storage wpm_s; |
|
|
|
/** Global position */ |
|
static struct vehicle_global_position_s global_pos; |
|
|
|
/** Local position */ |
|
static struct vehicle_local_position_s local_pos; |
|
|
|
/** Vehicle status */ |
|
static struct vehicle_status_s v_status; |
|
|
|
/** RC channels */ |
|
static struct rc_channels_s rc; |
|
|
|
/* HIL publishers */ |
|
static orb_advert_t pub_hil_attitude = -1; |
|
|
|
/** HIL attitude */ |
|
static struct vehicle_attitude_s hil_attitude; |
|
|
|
static struct vehicle_global_position_s hil_global_pos; |
|
|
|
static struct fixedwing_control_s fw_control; |
|
|
|
static struct ardrone_motors_setpoint_s ardrone_motors; |
|
|
|
static struct vehicle_command_s vcmd; |
|
|
|
static orb_advert_t pub_hil_global_pos = -1; |
|
static orb_advert_t ardrone_motors_pub = -1; |
|
static orb_advert_t cmd_pub = -1; |
|
static int local_pos_sub = -1; |
|
static orb_advert_t flow_pub = -1; |
|
static orb_advert_t global_position_setpoint_pub = -1; |
|
static orb_advert_t local_position_setpoint_pub = -1; |
|
static bool mavlink_hil_enabled = false; |
|
|
|
static char mavlink_message_string[51] = {0}; |
|
|
|
/* interface mode */ |
|
static enum { |
|
MAVLINK_INTERFACE_MODE_OFFBOARD, |
|
MAVLINK_INTERFACE_MODE_ONBOARD |
|
} mavlink_link_mode = MAVLINK_INTERFACE_MODE_OFFBOARD; |
|
|
|
static struct mavlink_subscriptions { |
|
int sensor_sub; |
|
int att_sub; |
|
int global_pos_sub; |
|
int act_0_sub; |
|
int act_1_sub; |
|
int act_2_sub; |
|
int act_3_sub; |
|
int gps_sub; |
|
int man_control_sp_sub; |
|
bool initialized; |
|
} mavlink_subs = { |
|
.sensor_sub = 0, |
|
.att_sub = 0, |
|
.global_pos_sub = 0, |
|
.act_0_sub = 0, |
|
.act_1_sub = 0, |
|
.act_2_sub = 0, |
|
.act_3_sub = 0, |
|
.gps_sub = 0, |
|
.man_control_sp_sub = 0, |
|
.initialized = false |
|
}; |
|
|
|
|
|
/* 3: Define waypoint helper functions */ |
|
void mavlink_wpm_send_message(mavlink_message_t *msg); |
|
void mavlink_wpm_send_gcs_string(const char *string); |
|
uint64_t mavlink_wpm_get_system_timestamp(void); |
|
int mavlink_missionlib_send_message(mavlink_message_t *msg); |
|
int mavlink_missionlib_send_gcs_string(const char *string); |
|
uint64_t mavlink_missionlib_get_system_timestamp(void); |
|
|
|
void handleMessage(mavlink_message_t *msg); |
|
|
|
/** |
|
* Enable / disable Hardware in the Loop simulation mode. |
|
*/ |
|
int set_hil_on_off(bool hil_enabled); |
|
|
|
/** |
|
* Translate the custom state into standard mavlink modes and state. |
|
*/ |
|
void get_mavlink_mode_and_state(const struct vehicle_status_s *c_status, uint8_t *mavlink_state, uint8_t *mavlink_mode); |
|
|
|
int mavlink_open_uart(int baudrate, const char *uart_name, struct termios *uart_config_original, bool *is_usb); |
|
|
|
/* 4: Include waypoint protocol */ |
|
#include "waypoints.h" |
|
mavlink_wpm_storage *wpm; |
|
|
|
|
|
#include "mavlink_parameters.h" |
|
|
|
/** |
|
* Print the usage |
|
*/ |
|
static void usage(const char *reason); |
|
|
|
static uint8_t missionlib_msg_buf[MAVLINK_MAX_PACKET_LEN]; |
|
|
|
int mavlink_missionlib_send_message(mavlink_message_t *msg) |
|
{ |
|
uint16_t len = mavlink_msg_to_send_buffer(missionlib_msg_buf, msg); |
|
int writelen = write(uart, missionlib_msg_buf, len); |
|
if (writelen != len) { |
|
return 1; |
|
} else { |
|
return 0; |
|
} |
|
} |
|
|
|
int mavlink_missionlib_send_gcs_string(const char *string) |
|
{ |
|
const int len = MAVLINK_MSG_STATUSTEXT_FIELD_TEXT_LEN; |
|
mavlink_statustext_t statustext; |
|
int i = 0; |
|
|
|
while (i < len - 1) { |
|
statustext.text[i] = string[i]; |
|
|
|
if (string[i] == '\0') |
|
break; |
|
|
|
i++; |
|
} |
|
|
|
if (i > 1) { |
|
/* Enforce null termination */ |
|
statustext.text[i] = '\0'; |
|
mavlink_message_t msg; |
|
|
|
mavlink_msg_statustext_encode(mavlink_system.sysid, mavlink_system.compid, &msg, &statustext); |
|
return mavlink_missionlib_send_message(&msg); |
|
} else { |
|
return 1; |
|
} |
|
} |
|
|
|
/** |
|
* Get system time since boot in microseconds |
|
* |
|
* @return the system time since boot in microseconds |
|
*/ |
|
uint64_t mavlink_missionlib_get_system_timestamp() |
|
{ |
|
return hrt_absolute_time(); |
|
} |
|
|
|
/** |
|
* This callback is executed each time a waypoint changes. |
|
* |
|
* It publishes the vehicle_global_position_setpoint_s or the |
|
* vehicle_local_position_setpoint_s topic, depending on the type of waypoint |
|
*/ |
|
extern void mavlink_missionlib_current_waypoint_changed(uint16_t index, float param1, |
|
float param2, float param3, float param4, float param5_lat_x, |
|
float param6_lon_y, float param7_alt_z, uint8_t frame, uint16_t command) |
|
{ |
|
char buf[50] = {0}; |
|
|
|
/* Update controller setpoints */ |
|
if (frame == (int)MAV_FRAME_GLOBAL) { |
|
/* global, absolute waypoint */ |
|
struct vehicle_global_position_setpoint_s sp; |
|
sp.lat = param5_lat_x * 1e7f; |
|
sp.lon = param6_lon_y * 1e7f; |
|
sp.altitude = param7_alt_z; |
|
sp.altitude_is_relative = false; |
|
sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; |
|
/* Initialize publication if necessary */ |
|
if (global_position_setpoint_pub < 0) { |
|
global_position_setpoint_pub = orb_advertise(ORB_ID(vehicle_global_position_setpoint), &sp); |
|
} else { |
|
orb_publish(ORB_ID(vehicle_global_position_setpoint), global_position_setpoint_pub, &sp); |
|
} |
|
sprintf(buf, "[mp] WP#%i lat: % 3.6f/lon % 3.6f/alt % 4.6f/hdg %3.4f\n", (int)index, (double)param5_lat_x, (double)param6_lon_y, (double)param7_alt_z, (double)param4); |
|
|
|
} else if (frame == (int)MAV_FRAME_GLOBAL_RELATIVE_ALT) { |
|
/* global, relative alt (in relation to HOME) waypoint */ |
|
struct vehicle_global_position_setpoint_s sp; |
|
sp.lat = param5_lat_x * 1e7f; |
|
sp.lon = param6_lon_y * 1e7f; |
|
sp.altitude = param7_alt_z; |
|
sp.altitude_is_relative = true; |
|
sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; |
|
/* Initialize publication if necessary */ |
|
if (global_position_setpoint_pub < 0) { |
|
global_position_setpoint_pub = orb_advertise(ORB_ID(vehicle_global_position_setpoint), &sp); |
|
} else { |
|
orb_publish(ORB_ID(vehicle_global_position_setpoint), global_position_setpoint_pub, &sp); |
|
} |
|
sprintf(buf, "[mp] WP#%i (lat: %f/lon %f/rel alt %f/hdg %f\n", (int)index, (double)param5_lat_x, (double)param6_lon_y, (double)param7_alt_z, (double)param4); |
|
|
|
} else if (frame == (int)MAV_FRAME_LOCAL_ENU || frame == (int)MAV_FRAME_LOCAL_NED) { |
|
/* local, absolute waypoint */ |
|
struct vehicle_local_position_setpoint_s sp; |
|
sp.x = param5_lat_x; |
|
sp.y = param6_lon_y; |
|
sp.z = param7_alt_z; |
|
sp.yaw = (param4 / 180.0f) * M_PI_F - M_PI_F; |
|
/* Initialize publication if necessary */ |
|
if (local_position_setpoint_pub < 0) { |
|
local_position_setpoint_pub = orb_advertise(ORB_ID(vehicle_local_position_setpoint), &sp); |
|
} else { |
|
orb_publish(ORB_ID(vehicle_local_position_setpoint), local_position_setpoint_pub, &sp); |
|
} |
|
sprintf(buf, "[mp] WP#%i (x: %f/y %f/z %f/hdg %f\n", (int)index, (double)param5_lat_x, (double)param6_lon_y, (double)param7_alt_z, (double)param4); |
|
} |
|
|
|
mavlink_missionlib_send_gcs_string(buf); |
|
printf("%s\n", buf); |
|
//printf("[mavlink mp] new setpoint\n");//: frame: %d, lat: %d, lon: %d, alt: %d, yaw: %d\n", frame, param5_lat_x*1000, param6_lon_y*1000, param7_alt_z*1000, param4*1000); |
|
} |
|
|
|
|
|
|
|
int set_hil_on_off(bool hil_enabled) |
|
{ |
|
int ret = OK; |
|
|
|
/* Enable HIL */ |
|
if (hil_enabled && !mavlink_hil_enabled) { |
|
|
|
//printf("\n HIL ON \n"); |
|
|
|
(void)close(pub_hil_attitude); |
|
(void)close(pub_hil_global_pos); |
|
|
|
/* Advertise topics */ |
|
pub_hil_attitude = orb_advertise(ORB_ID(vehicle_attitude), &hil_attitude); |
|
pub_hil_global_pos = orb_advertise(ORB_ID(vehicle_global_position), &hil_global_pos); |
|
|
|
printf("\n pub_hil_attitude :%i\n", pub_hil_attitude); |
|
printf("\n pub_hil_global_pos :%i\n", pub_hil_global_pos); |
|
|
|
if (pub_hil_attitude > 0 && pub_hil_global_pos > 0) { |
|
mavlink_hil_enabled = true; |
|
|
|
} else { |
|
ret = ERROR; |
|
} |
|
} |
|
|
|
if (!hil_enabled && mavlink_hil_enabled) { |
|
mavlink_hil_enabled = false; |
|
(void)close(pub_hil_attitude); |
|
(void)close(pub_hil_global_pos); |
|
|
|
} else { |
|
ret = ERROR; |
|
} |
|
|
|
return ret; |
|
} |
|
|
|
void get_mavlink_mode_and_state(const struct vehicle_status_s *c_status, uint8_t *mavlink_state, uint8_t *mavlink_mode) |
|
{ |
|
/* reset MAVLink mode bitfield */ |
|
*mavlink_mode = 0; |
|
|
|
/* set mode flags independent of system state */ |
|
if (c_status->flag_control_manual_enabled) { |
|
*mavlink_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED; |
|
} |
|
|
|
switch (c_status->state_machine) { |
|
case SYSTEM_STATE_PREFLIGHT: |
|
if (c_status->preflight_gyro_calibration || c_status->preflight_mag_calibration) { |
|
*mavlink_state = MAV_STATE_CALIBRATING; |
|
*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED; |
|
} else { |
|
*mavlink_state = MAV_STATE_UNINIT; |
|
*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED; |
|
} |
|
break; |
|
|
|
case SYSTEM_STATE_STANDBY: |
|
*mavlink_state = MAV_STATE_STANDBY; |
|
*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_GROUND_READY: |
|
*mavlink_state = MAV_STATE_ACTIVE; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_MANUAL: |
|
*mavlink_state = MAV_STATE_ACTIVE; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
*mavlink_mode |= MAV_MODE_FLAG_MANUAL_INPUT_ENABLED; |
|
break; |
|
|
|
case SYSTEM_STATE_STABILIZED: |
|
*mavlink_state = MAV_STATE_ACTIVE; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
*mavlink_mode |= MAV_MODE_FLAG_STABILIZE_ENABLED; |
|
break; |
|
|
|
case SYSTEM_STATE_AUTO: |
|
*mavlink_state = MAV_STATE_ACTIVE; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
*mavlink_mode |= MAV_MODE_FLAG_GUIDED_ENABLED; |
|
break; |
|
|
|
case SYSTEM_STATE_MISSION_ABORT: |
|
*mavlink_state = MAV_STATE_EMERGENCY; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_EMCY_LANDING: |
|
*mavlink_state = MAV_STATE_EMERGENCY; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_EMCY_CUTOFF: |
|
*mavlink_state = MAV_STATE_EMERGENCY; |
|
*mavlink_mode |= MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_GROUND_ERROR: |
|
*mavlink_state = MAV_STATE_EMERGENCY; |
|
*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
|
|
case SYSTEM_STATE_REBOOT: |
|
*mavlink_state = MAV_STATE_POWEROFF; |
|
*mavlink_mode &= ~MAV_MODE_FLAG_SAFETY_ARMED; |
|
break; |
|
} |
|
|
|
} |
|
|
|
/** |
|
* Receive data from UART. |
|
*/ |
|
static void *receiveloop(void *arg) |
|
{ |
|
int uart_fd = *((int*)arg); |
|
|
|
const int timeout = 1000; |
|
uint8_t ch; |
|
|
|
mavlink_message_t msg; |
|
|
|
prctl(PR_SET_NAME, "mavlink uart rcv", getpid()); |
|
|
|
while (!thread_should_exit) { |
|
|
|
struct pollfd fds[] = { { .fd = uart_fd, .events = POLLIN } }; |
|
|
|
if (poll(fds, 1, timeout) > 0) { |
|
/* non-blocking read until buffer is empty */ |
|
int nread = 0; |
|
|
|
do { |
|
nread = read(uart_fd, &ch, 1); |
|
|
|
if (mavlink_parse_char(chan, ch, &msg, &status)) { //parse the char |
|
/* handle generic messages and commands */ |
|
handleMessage(&msg); |
|
|
|
/* Handle packet with waypoint component */ |
|
mavlink_wpm_message_handler(&msg, &global_pos, &local_pos); |
|
|
|
/* Handle packet with parameter component */ |
|
mavlink_pm_message_handler(MAVLINK_COMM_0, &msg); |
|
} |
|
} while (nread > 0); |
|
} |
|
} |
|
|
|
return NULL; |
|
} |
|
|
|
static int set_mavlink_interval_limit(struct mavlink_subscriptions *subs, int mavlink_msg_id, int min_interval) |
|
{ |
|
int ret = OK; |
|
|
|
switch (mavlink_msg_id) { |
|
case MAVLINK_MSG_ID_SCALED_IMU: |
|
/* senser sub triggers scaled IMU */ |
|
if (subs->sensor_sub) orb_set_interval(subs->sensor_sub, min_interval); |
|
break; |
|
case MAVLINK_MSG_ID_RAW_IMU: |
|
/* senser sub triggers RAW IMU */ |
|
if (subs->sensor_sub) orb_set_interval(subs->sensor_sub, min_interval); |
|
break; |
|
case MAVLINK_MSG_ID_ATTITUDE: |
|
/* attitude sub triggers attitude */ |
|
if (subs->att_sub) orb_set_interval(subs->att_sub, min_interval); |
|
break; |
|
case MAVLINK_MSG_ID_SERVO_OUTPUT_RAW: |
|
/* actuator_outputs triggers this message */ |
|
if (subs->act_0_sub) orb_set_interval(subs->act_0_sub, min_interval); |
|
if (subs->act_1_sub) orb_set_interval(subs->act_1_sub, min_interval); |
|
if (subs->act_2_sub) orb_set_interval(subs->act_2_sub, min_interval); |
|
if (subs->act_3_sub) orb_set_interval(subs->act_3_sub, min_interval); |
|
break; |
|
case MAVLINK_MSG_ID_MANUAL_CONTROL: |
|
/* manual_control_setpoint triggers this message */ |
|
if (subs->man_control_sp_sub) orb_set_interval(subs->man_control_sp_sub, min_interval); |
|
default: |
|
/* not found */ |
|
ret = ERROR; |
|
break; |
|
} |
|
|
|
return ret; |
|
} |
|
|
|
/** |
|
* Listen for uORB topics and send via MAVLink. |
|
* |
|
* This pthread performs a blocking wait on selected |
|
* uORB topics and sends them via MAVLink to other |
|
* vehicles or a ground control station. |
|
*/ |
|
static void *uorb_receiveloop(void *arg) |
|
{ |
|
/* obtain reference to task's subscriptions */ |
|
struct mavlink_subscriptions *subs = (struct mavlink_subscriptions *)arg; |
|
|
|
/* Set thread name */ |
|
prctl(PR_SET_NAME, "mavlink orb rcv", getpid()); |
|
|
|
|
|
/* --- IMPORTANT: DEFINE NUMBER OF ORB STRUCTS TO WAIT FOR HERE --- */ |
|
/* number of messages */ |
|
const ssize_t fdsc = 25; |
|
/* Sanity check variable and index */ |
|
ssize_t fdsc_count = 0; |
|
/* file descriptors to wait for */ |
|
struct pollfd fds[fdsc]; |
|
|
|
|
|
union { |
|
struct sensor_combined_s raw; |
|
struct vehicle_attitude_s att; |
|
struct vehicle_gps_position_s gps; |
|
struct ardrone_control_s ar_control; |
|
struct vehicle_local_position_setpoint_s local_sp; |
|
struct vehicle_global_position_setpoint_s global_sp; |
|
struct vehicle_attitude_setpoint_s att_sp; |
|
struct actuator_outputs_s act_outputs; |
|
struct manual_control_setpoint_s man_control; |
|
} buf; |
|
|
|
/* --- SENSORS RAW VALUE --- */ |
|
/* subscribe to ORB for sensors raw */ |
|
subs->sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); |
|
fds[fdsc_count].fd = subs->sensor_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- ATTITUDE VALUE --- */ |
|
/* subscribe to ORB for attitude */ |
|
subs->att_sub = orb_subscribe(ORB_ID(vehicle_attitude)); |
|
orb_set_interval(subs->att_sub, 100); |
|
fds[fdsc_count].fd = subs->att_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- GPS VALUE --- */ |
|
/* subscribe to ORB for attitude */ |
|
subs->gps_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); |
|
orb_set_interval(subs->gps_sub, 1000); /* 1Hz updates */ |
|
fds[fdsc_count].fd = subs->gps_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
// /* --- ARDRONE CONTROL --- */ |
|
// /* subscribe to ORB for AR.Drone controller outputs */ |
|
// int ar_sub = orb_subscribe(ORB_ID(ardrone_control)); |
|
// orb_set_interval(ar_sub, 200); /* 5Hz updates */ |
|
// fds[fdsc_count].fd = ar_sub; |
|
// fds[fdsc_count].events = POLLIN; |
|
// fdsc_count++; |
|
|
|
/* --- SYSTEM STATE --- */ |
|
/* struct already globally allocated */ |
|
/* subscribe to topic */ |
|
int status_sub = orb_subscribe(ORB_ID(vehicle_status)); |
|
orb_set_interval(status_sub, 300); /* max 3.33 Hz updates */ |
|
fds[fdsc_count].fd = status_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- RC CHANNELS VALUE --- */ |
|
/* struct already globally allocated */ |
|
/* subscribe to ORB for global position */ |
|
int rc_sub = orb_subscribe(ORB_ID(rc_channels)); |
|
orb_set_interval(rc_sub, 100); /* 10Hz updates */ |
|
fds[fdsc_count].fd = rc_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- FIXED WING CONTROL VALUE --- */ |
|
/* struct already globally allocated */ |
|
/* subscribe to ORB for fixed wing control */ |
|
int fw_sub = orb_subscribe(ORB_ID(fixedwing_control)); |
|
orb_set_interval(fw_sub, 50); /* 20 Hz updates */ |
|
fds[fdsc_count].fd = fw_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- GLOBAL POS VALUE --- */ |
|
/* struct already globally allocated and topic already subscribed */ |
|
fds[fdsc_count].fd = subs->global_pos_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- LOCAL POS VALUE --- */ |
|
/* struct and topic already globally subscribed */ |
|
fds[fdsc_count].fd = local_pos_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- GLOBAL SETPOINT VALUE --- */ |
|
/* subscribe to ORB for local setpoint */ |
|
/* struct already allocated */ |
|
int spg_sub = orb_subscribe(ORB_ID(vehicle_global_position_setpoint)); |
|
orb_set_interval(spg_sub, 2000); /* 0.5 Hz updates */ |
|
fds[fdsc_count].fd = spg_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- LOCAL SETPOINT VALUE --- */ |
|
/* subscribe to ORB for local setpoint */ |
|
/* struct already allocated */ |
|
int spl_sub = orb_subscribe(ORB_ID(vehicle_local_position_setpoint)); |
|
orb_set_interval(spl_sub, 2000); /* 0.5 Hz updates */ |
|
fds[fdsc_count].fd = spl_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* --- ATTITUDE SETPOINT VALUE --- */ |
|
/* subscribe to ORB for attitude setpoint */ |
|
/* struct already allocated */ |
|
int spa_sub = orb_subscribe(ORB_ID(vehicle_attitude_setpoint)); |
|
orb_set_interval(spa_sub, 2000); /* 0.5 Hz updates */ |
|
fds[fdsc_count].fd = spa_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/** --- ACTUATOR OUTPUTS --- */ |
|
subs->act_0_sub = orb_subscribe(ORB_ID(actuator_outputs_0)); |
|
fds[fdsc_count].fd = subs->act_0_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
subs->act_1_sub = orb_subscribe(ORB_ID(actuator_outputs_1)); |
|
fds[fdsc_count].fd = subs->act_1_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
subs->act_2_sub = orb_subscribe(ORB_ID(actuator_outputs_2)); |
|
fds[fdsc_count].fd = subs->act_2_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
subs->act_3_sub = orb_subscribe(ORB_ID(actuator_outputs_3)); |
|
fds[fdsc_count].fd = subs->act_3_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/** --- MAPPED MANUAL CONTROL INPUTS --- */ |
|
subs->man_control_sp_sub = orb_subscribe(ORB_ID(manual_control_setpoint)); |
|
fds[fdsc_count].fd = subs->man_control_sp_sub; |
|
fds[fdsc_count].events = POLLIN; |
|
fdsc_count++; |
|
|
|
/* all subscriptions initialized, return success */ |
|
subs->initialized = true; |
|
|
|
unsigned int sensors_raw_counter = 0; |
|
unsigned int attitude_counter = 0; |
|
unsigned int gps_counter = 0; |
|
|
|
/* WARNING: If you get the error message below, |
|
* then the number of registered messages (fdsc) |
|
* differs from the number of messages in the above list. |
|
*/ |
|
if (fdsc_count > fdsc) { |
|
fprintf(stderr, "[mavlink] WARNING: Not enough space for poll fds allocated. Check %s:%d.\n", __FILE__, __LINE__); |
|
fdsc_count = fdsc; |
|
} |
|
|
|
/* |
|
* set up poll to block for new data, |
|
* wait for a maximum of 1000 ms (1 second) |
|
*/ |
|
const int timeout = 1000; |
|
|
|
while (!thread_should_exit) { |
|
|
|
int poll_ret = poll(fds, fdsc_count, timeout); |
|
|
|
/* handle the poll result */ |
|
if (poll_ret == 0) { |
|
/* XXX this means none of our providers is giving us data - might be an error? */ |
|
} else if (poll_ret < 0) { |
|
/* XXX this is seriously bad - should be an emergency */ |
|
} else { |
|
|
|
int ifds = 0; |
|
|
|
/* --- SENSORS RAW VALUE --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
|
|
/* copy sensors raw data into local buffer */ |
|
orb_copy(ORB_ID(sensor_combined), subs->sensor_sub, &buf.raw); |
|
|
|
/* send raw imu data */ |
|
mavlink_msg_raw_imu_send(MAVLINK_COMM_0, buf.raw.timestamp, buf.raw.accelerometer_raw[0], buf.raw.accelerometer_raw[1], buf.raw.accelerometer_raw[2], buf.raw.gyro_raw[0], buf.raw.gyro_raw[1], buf.raw.gyro_raw[2], buf.raw.magnetometer_raw[0], buf.raw.magnetometer_raw[1], buf.raw.magnetometer_raw[2]); |
|
/* send scaled imu data (m/s^2 accelerations scaled back to milli-g) */ |
|
mavlink_msg_scaled_imu_send(MAVLINK_COMM_0, buf.raw.timestamp, buf.raw.accelerometer_m_s2[0] * 101.936799f, buf.raw.accelerometer_m_s2[1] * 101.936799f, buf.raw.accelerometer_m_s2[2] * 101.936799f, buf.raw.gyro_rad_s[0] * 1000, buf.raw.gyro_rad_s[1] * 1000, buf.raw.gyro_rad_s[2] * 1000, buf.raw.magnetometer_ga[0] * 1000, buf.raw.magnetometer_ga[1] * 1000, buf.raw.magnetometer_ga[2] * 1000); |
|
/* send pressure */ |
|
mavlink_msg_scaled_pressure_send(MAVLINK_COMM_0, buf.raw.timestamp / 1000, buf.raw.baro_pres_mbar, buf.raw.baro_alt_meter, buf.raw.baro_temp_celcius * 100); |
|
|
|
sensors_raw_counter++; |
|
} |
|
|
|
/* --- ATTITUDE VALUE --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
|
|
/* copy attitude data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_attitude), subs->att_sub, &buf.att); |
|
|
|
/* send sensor values */ |
|
mavlink_msg_attitude_send(MAVLINK_COMM_0, buf.att.timestamp / 1000, buf.att.roll, buf.att.pitch, buf.att.yaw, buf.att.rollspeed, buf.att.pitchspeed, buf.att.yawspeed); |
|
|
|
attitude_counter++; |
|
} |
|
|
|
/* --- GPS VALUE --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy gps data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_gps_position), subs->gps_sub, &buf.gps); |
|
/* GPS position */ |
|
mavlink_msg_gps_raw_int_send(MAVLINK_COMM_0, buf.gps.timestamp, buf.gps.fix_type, buf.gps.lat, buf.gps.lon, buf.gps.alt, buf.gps.eph, buf.gps.epv, buf.gps.vel, buf.gps.cog, buf.gps.satellites_visible); |
|
|
|
if (buf.gps.satellite_info_available && (gps_counter % 4 == 0)) { |
|
mavlink_msg_gps_status_send(MAVLINK_COMM_0, buf.gps.satellites_visible, buf.gps.satellite_prn, buf.gps.satellite_used, buf.gps.satellite_elevation, buf.gps.satellite_azimuth, buf.gps.satellite_snr); |
|
} |
|
|
|
gps_counter++; |
|
} |
|
|
|
// /* --- ARDRONE CONTROL OUTPUTS --- */ |
|
// if (fds[ifds++].revents & POLLIN) { |
|
// /* copy ardrone control data into local buffer */ |
|
// orb_copy(ORB_ID(ardrone_control), ar_sub, &buf.ar_control); |
|
// uint64_t timestamp = buf.ar_control.timestamp; |
|
// float setpoint_roll = buf.ar_control.setpoint_attitude[0]; |
|
// float setpoint_pitch = buf.ar_control.setpoint_attitude[1]; |
|
// float setpoint_yaw = buf.ar_control.setpoint_attitude[2]; |
|
// float setpoint_thrust = buf.ar_control.setpoint_thrust_cast; |
|
|
|
// float control_roll = buf.ar_control.attitude_control_output[0]; |
|
// float control_pitch = buf.ar_control.attitude_control_output[1]; |
|
// float control_yaw = buf.ar_control.attitude_control_output[2]; |
|
|
|
// mavlink_msg_roll_pitch_yaw_thrust_setpoint_send(MAVLINK_COMM_0, timestamp / 1000, setpoint_roll, setpoint_pitch, setpoint_yaw, setpoint_thrust); |
|
// mavlink_msg_named_value_float_send(MAVLINK_COMM_0, timestamp / 1000, "cl.roll", control_roll); |
|
// mavlink_msg_named_value_float_send(MAVLINK_COMM_0, timestamp / 1000, "cl.pitch", control_pitch); |
|
// mavlink_msg_named_value_float_send(MAVLINK_COMM_0, timestamp / 1000, "cl.yaw", control_yaw); |
|
// } |
|
|
|
/* --- SYSTEM STATUS --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* immediately communicate state changes back to user */ |
|
orb_copy(ORB_ID(vehicle_status), status_sub, &v_status); |
|
/* enable or disable HIL */ |
|
set_hil_on_off(v_status.flag_hil_enabled); |
|
|
|
/* translate the current syste state to mavlink state and mode */ |
|
uint8_t mavlink_state = 0; |
|
uint8_t mavlink_mode = 0; |
|
get_mavlink_mode_and_state(&v_status, &mavlink_state, &mavlink_mode); |
|
|
|
/* send heartbeat */ |
|
mavlink_msg_heartbeat_send(chan, mavlink_system.type, MAV_AUTOPILOT_PX4, mavlink_mode, v_status.state_machine, mavlink_state); |
|
} |
|
|
|
/* --- RC CHANNELS --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy rc channels into local buffer */ |
|
orb_copy(ORB_ID(rc_channels), rc_sub, &rc); |
|
/* Channels are sent in MAVLink main loop at a fixed interval */ |
|
// TODO decide where to send channels |
|
} |
|
|
|
/* --- FIXED WING CONTROL CHANNELS --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy fixed wing control into local buffer */ |
|
orb_copy(ORB_ID(fixedwing_control), fw_sub, &fw_control); |
|
/* send control output via MAVLink */ |
|
mavlink_msg_roll_pitch_yaw_thrust_setpoint_send(MAVLINK_COMM_0, fw_control.timestamp / 1000, fw_control.attitude_control_output[0], |
|
fw_control.attitude_control_output[1], fw_control.attitude_control_output[2], |
|
fw_control.attitude_control_output[3]); |
|
|
|
/* Only send in HIL mode */ |
|
if (v_status.flag_hil_enabled) { |
|
/* Send the desired attitude from RC or from the autonomous controller */ |
|
// XXX it should not depend on a RC setting, but on a system_state value |
|
|
|
float roll_ail, pitch_elev, throttle, yaw_rudd; |
|
|
|
if (rc.chan[rc.function[OVERRIDE]].scale < 2000) { |
|
|
|
//orb_copy(ORB_ID(fixedwing_control), fixed_wing_control_sub, &fixed_wing_control); |
|
roll_ail = fw_control.attitude_control_output[ROLL]; |
|
pitch_elev = fw_control.attitude_control_output[PITCH]; |
|
throttle = fw_control.attitude_control_output[THROTTLE]; |
|
yaw_rudd = fw_control.attitude_control_output[YAW]; |
|
|
|
} else { |
|
|
|
roll_ail = rc.chan[rc.function[ROLL]].scale; |
|
pitch_elev = rc.chan[rc.function[PITCH]].scale; |
|
throttle = rc.chan[rc.function[THROTTLE]].scale; |
|
yaw_rudd = rc.chan[rc.function[YAW]].scale; |
|
} |
|
|
|
/* hacked HIL implementation in order for the APM Planner to work |
|
* (correct cmd: mavlink_msg_hil_controls_send()) |
|
*/ |
|
|
|
mavlink_msg_rc_channels_scaled_send(chan, |
|
hrt_absolute_time(), |
|
0, // port 0 |
|
roll_ail, |
|
pitch_elev, |
|
throttle, |
|
yaw_rudd, |
|
0, |
|
0, |
|
0, |
|
0, |
|
1 /*rssi=1*/); |
|
|
|
/* correct command duplicate */ |
|
mavlink_msg_hil_controls_send(chan, |
|
hrt_absolute_time(), |
|
roll_ail, |
|
pitch_elev, |
|
yaw_rudd, |
|
throttle, |
|
0, |
|
0, |
|
0, |
|
0, |
|
32, /* HIL_MODE */ |
|
0); |
|
} |
|
} |
|
|
|
/* --- VEHICLE GLOBAL POSITION --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy global position data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_global_position), subs->global_pos_sub, &global_pos); |
|
uint64_t timestamp = global_pos.timestamp; |
|
int32_t lat = global_pos.lat; |
|
int32_t lon = global_pos.lon; |
|
int32_t alt = (int32_t)(global_pos.alt*1000); |
|
int32_t relative_alt = (int32_t)(global_pos.relative_alt * 1000.0f); |
|
int16_t vx = (int16_t)(global_pos.vx * 100.0f); |
|
int16_t vy = (int16_t)(global_pos.vy * 100.0f); |
|
int16_t vz = (int16_t)(global_pos.vz * 100.0f); |
|
/* heading in degrees * 10, from 0 to 36.000) */ |
|
uint16_t hdg = (global_pos.hdg / M_PI_F) * (180.0f * 10.0f) + (180.0f * 10.0f); |
|
|
|
mavlink_msg_global_position_int_send(MAVLINK_COMM_0, timestamp / 1000, lat, lon, alt, relative_alt, vx, vy, vz, hdg); |
|
} |
|
|
|
/* --- VEHICLE LOCAL POSITION --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy local position data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_local_position), local_pos_sub, &local_pos); |
|
mavlink_msg_local_position_ned_send(MAVLINK_COMM_0, local_pos.timestamp / 1000, local_pos.x, local_pos.y, local_pos.z, local_pos.vx, local_pos.vy, local_pos.vz); |
|
} |
|
|
|
/* --- VEHICLE GLOBAL SETPOINT --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy local position data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_global_position_setpoint), spg_sub, &buf.global_sp); |
|
uint8_t coordinate_frame = MAV_FRAME_GLOBAL; |
|
if (buf.global_sp.altitude_is_relative) coordinate_frame = MAV_FRAME_GLOBAL_RELATIVE_ALT; |
|
mavlink_msg_global_position_setpoint_int_send(MAVLINK_COMM_0, coordinate_frame, buf.global_sp.lat, buf.global_sp.lon, buf.global_sp.altitude, buf.global_sp.yaw); |
|
} |
|
|
|
/* --- VEHICLE LOCAL SETPOINT --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy local position data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_local_position_setpoint), spl_sub, &buf.local_sp); |
|
mavlink_msg_local_position_setpoint_send(MAVLINK_COMM_0, MAV_FRAME_LOCAL_NED, buf.local_sp.x, buf.local_sp.y, buf.local_sp.z, buf.local_sp.yaw); |
|
} |
|
|
|
/* --- VEHICLE ATTITUDE SETPOINT --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy local position data into local buffer */ |
|
orb_copy(ORB_ID(vehicle_attitude_setpoint), spa_sub, &buf.att_sp); |
|
mavlink_msg_roll_pitch_yaw_thrust_setpoint_send(MAVLINK_COMM_0, buf.att_sp.timestamp/1000, buf.att_sp.roll_tait_bryan, buf.att_sp.pitch_tait_bryan, buf.att_sp.yaw_tait_bryan, buf.att_sp.thrust); |
|
} |
|
|
|
/* --- ACTUATOR OUTPUTS 0 --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy actuator data into local buffer */ |
|
orb_copy(ORB_ID(actuator_outputs_0), subs->act_0_sub, &buf.act_outputs); |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
0 /* port 0 */, |
|
buf.act_outputs.output[0], |
|
buf.act_outputs.output[1], |
|
buf.act_outputs.output[2], |
|
buf.act_outputs.output[3], |
|
buf.act_outputs.output[4], |
|
buf.act_outputs.output[5], |
|
buf.act_outputs.output[6], |
|
buf.act_outputs.output[7]); |
|
// if (NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) { |
|
// mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
// 1 /* port 1 */, |
|
// buf.act_outputs.output[ 8], |
|
// buf.act_outputs.output[ 9], |
|
// buf.act_outputs.output[10], |
|
// buf.act_outputs.output[11], |
|
// buf.act_outputs.output[12], |
|
// buf.act_outputs.output[13], |
|
// buf.act_outputs.output[14], |
|
// buf.act_outputs.output[15]); |
|
// } |
|
} |
|
|
|
/* --- ACTUATOR OUTPUTS 1 --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy actuator data into local buffer */ |
|
orb_copy(ORB_ID(actuator_outputs_1), subs->act_1_sub, &buf.act_outputs); |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
(NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) ? 2 : 1 /* port 2 or 1*/, |
|
buf.act_outputs.output[0], |
|
buf.act_outputs.output[1], |
|
buf.act_outputs.output[2], |
|
buf.act_outputs.output[3], |
|
buf.act_outputs.output[4], |
|
buf.act_outputs.output[5], |
|
buf.act_outputs.output[6], |
|
buf.act_outputs.output[7]); |
|
if (NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) { |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
3 /* port 3 */, |
|
buf.act_outputs.output[ 8], |
|
buf.act_outputs.output[ 9], |
|
buf.act_outputs.output[10], |
|
buf.act_outputs.output[11], |
|
buf.act_outputs.output[12], |
|
buf.act_outputs.output[13], |
|
buf.act_outputs.output[14], |
|
buf.act_outputs.output[15]); |
|
} |
|
} |
|
|
|
/* --- ACTUATOR OUTPUTS 2 --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy actuator data into local buffer */ |
|
orb_copy(ORB_ID(actuator_outputs_2), subs->act_2_sub, &buf.act_outputs); |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
(NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) ? 4 : 2 /* port 4 or 2 */, |
|
buf.act_outputs.output[0], |
|
buf.act_outputs.output[1], |
|
buf.act_outputs.output[2], |
|
buf.act_outputs.output[3], |
|
buf.act_outputs.output[4], |
|
buf.act_outputs.output[5], |
|
buf.act_outputs.output[6], |
|
buf.act_outputs.output[7]); |
|
if (NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) { |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
5 /* port 5 */, |
|
buf.act_outputs.output[ 8], |
|
buf.act_outputs.output[ 9], |
|
buf.act_outputs.output[10], |
|
buf.act_outputs.output[11], |
|
buf.act_outputs.output[12], |
|
buf.act_outputs.output[13], |
|
buf.act_outputs.output[14], |
|
buf.act_outputs.output[15]); |
|
} |
|
} |
|
|
|
/* --- ACTUATOR OUTPUTS 3 --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy actuator data into local buffer */ |
|
orb_copy(ORB_ID(actuator_outputs_3), subs->act_3_sub, &buf.act_outputs); |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
(NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) ? 6 : 3 /* port 6 or 3 */, |
|
buf.act_outputs.output[0], |
|
buf.act_outputs.output[1], |
|
buf.act_outputs.output[2], |
|
buf.act_outputs.output[3], |
|
buf.act_outputs.output[4], |
|
buf.act_outputs.output[5], |
|
buf.act_outputs.output[6], |
|
buf.act_outputs.output[7]); |
|
if (NUM_ACTUATOR_OUTPUTS > 8 && NUM_ACTUATOR_OUTPUTS <= 16) { |
|
mavlink_msg_servo_output_raw_send(MAVLINK_COMM_0, hrt_absolute_time(), |
|
7 /* port 7 */, |
|
buf.act_outputs.output[ 8], |
|
buf.act_outputs.output[ 9], |
|
buf.act_outputs.output[10], |
|
buf.act_outputs.output[11], |
|
buf.act_outputs.output[12], |
|
buf.act_outputs.output[13], |
|
buf.act_outputs.output[14], |
|
buf.act_outputs.output[15]); |
|
} |
|
} |
|
|
|
/* --- MAPPED MANUAL CONTROL INPUTS --- */ |
|
if (fds[ifds++].revents & POLLIN) { |
|
/* copy local position data into local buffer */ |
|
orb_copy(ORB_ID(manual_control_setpoint), subs->man_control_sp_sub, &buf.man_control); |
|
mavlink_msg_manual_control_send(MAVLINK_COMM_0, mavlink_system.sysid, buf.man_control.roll, |
|
buf.man_control.pitch, buf.man_control.yaw, buf.man_control.throttle, 1, 1, 1, 1); |
|
} |
|
} |
|
} |
|
|
|
return NULL; |
|
} |
|
|
|
/**************************************************************************** |
|
* MAVLink text message logger |
|
****************************************************************************/ |
|
|
|
static int mavlink_dev_ioctl(struct file *filep, int cmd, unsigned long arg); |
|
|
|
static const struct file_operations mavlink_fops = { |
|
.ioctl = mavlink_dev_ioctl |
|
}; |
|
|
|
static int |
|
mavlink_dev_ioctl(struct file *filep, int cmd, unsigned long arg) |
|
{ |
|
static unsigned int total_counter = 0; |
|
|
|
switch (cmd) { |
|
case (int)MAVLINK_IOC_SEND_TEXT_INFO: |
|
case (int)MAVLINK_IOC_SEND_TEXT_CRITICAL: |
|
case (int)MAVLINK_IOC_SEND_TEXT_EMERGENCY: { |
|
const char *txt = (const char *)arg; |
|
strncpy(mavlink_message_string, txt, 51); |
|
total_counter++; |
|
return OK; |
|
} |
|
|
|
default: |
|
return ENOTTY; |
|
} |
|
} |
|
|
|
/**************************************************************************** |
|
* Public Functions |
|
****************************************************************************/ |
|
void handleMessage(mavlink_message_t *msg) |
|
{ |
|
if (msg->msgid == MAVLINK_MSG_ID_COMMAND_LONG) { |
|
|
|
mavlink_command_long_t cmd_mavlink; |
|
mavlink_msg_command_long_decode(msg, &cmd_mavlink); |
|
|
|
if (cmd_mavlink.target_system == mavlink_system.sysid && ((cmd_mavlink.target_component == mavlink_system.compid) |
|
|| (cmd_mavlink.target_component == MAV_COMP_ID_ALL))) { |
|
//check for MAVLINK terminate command |
|
if (cmd_mavlink.command == MAV_CMD_PREFLIGHT_REBOOT_SHUTDOWN && ((int)cmd_mavlink.param1) == 3) { |
|
/* This is the link shutdown command, terminate mavlink */ |
|
printf("[mavlink] Terminating .. \n"); |
|
fflush(stdout); |
|
usleep(50000); |
|
|
|
/* terminate other threads and this thread */ |
|
thread_should_exit = true; |
|
|
|
} else { |
|
|
|
/* Copy the content of mavlink_command_long_t cmd_mavlink into command_t cmd */ |
|
vcmd.param1 = cmd_mavlink.param1; |
|
vcmd.param2 = cmd_mavlink.param2; |
|
vcmd.param3 = cmd_mavlink.param3; |
|
vcmd.param4 = cmd_mavlink.param4; |
|
vcmd.param5 = cmd_mavlink.param5; |
|
vcmd.param6 = cmd_mavlink.param6; |
|
vcmd.param7 = cmd_mavlink.param7; |
|
vcmd.command = cmd_mavlink.command; |
|
vcmd.target_system = cmd_mavlink.target_system; |
|
vcmd.target_component = cmd_mavlink.target_component; |
|
vcmd.source_system = msg->sysid; |
|
vcmd.source_component = msg->compid; |
|
vcmd.confirmation = cmd_mavlink.confirmation; |
|
|
|
/* check if topic is advertised */ |
|
if (cmd_pub <= 0) { |
|
cmd_pub = orb_advertise(ORB_ID(vehicle_command), &vcmd); |
|
} |
|
/* publish */ |
|
orb_publish(ORB_ID(vehicle_command), cmd_pub, &vcmd); |
|
} |
|
} |
|
} |
|
|
|
if (msg->msgid == MAVLINK_MSG_ID_OPTICAL_FLOW) { |
|
mavlink_optical_flow_t flow; |
|
mavlink_msg_optical_flow_decode(msg, &flow); |
|
|
|
struct optical_flow_s f; |
|
|
|
f.timestamp = flow.time_usec; |
|
f.flow_raw_x = flow.flow_x; |
|
f.flow_raw_y = flow.flow_y; |
|
f.flow_comp_x_m = flow.flow_comp_m_x; |
|
f.flow_comp_y_m = flow.flow_comp_m_y; |
|
f.ground_distance_m = flow.ground_distance; |
|
f.quality = flow.quality; |
|
f.sensor_id = flow.sensor_id; |
|
|
|
/* check if topic is advertised */ |
|
if (flow_pub <= 0) { |
|
flow_pub = orb_advertise(ORB_ID(optical_flow), &f); |
|
} else { |
|
/* publish */ |
|
orb_publish(ORB_ID(optical_flow), flow_pub, &f); |
|
} |
|
} |
|
|
|
if (msg->msgid == MAVLINK_MSG_ID_SET_MODE) { |
|
/* Set mode on request */ |
|
mavlink_set_mode_t new_mode; |
|
mavlink_msg_set_mode_decode(msg, &new_mode); |
|
|
|
/* Copy the content of mavlink_command_long_t cmd_mavlink into command_t cmd */ |
|
vcmd.param1 = new_mode.base_mode; |
|
vcmd.param2 = new_mode.custom_mode; |
|
vcmd.param3 = 0; |
|
vcmd.param4 = 0; |
|
vcmd.param5 = 0; |
|
vcmd.param6 = 0; |
|
vcmd.param7 = 0; |
|
vcmd.command = MAV_CMD_DO_SET_MODE; |
|
vcmd.target_system = new_mode.target_system; |
|
vcmd.target_component = MAV_COMP_ID_ALL; |
|
vcmd.source_system = msg->sysid; |
|
vcmd.source_component = msg->compid; |
|
vcmd.confirmation = 1; |
|
|
|
/* check if topic is advertised */ |
|
if (cmd_pub <= 0) { |
|
cmd_pub = orb_advertise(ORB_ID(vehicle_command), &vcmd); |
|
} |
|
/* create command */ |
|
orb_publish(ORB_ID(vehicle_command), cmd_pub, &vcmd); |
|
} |
|
|
|
/* Handle quadrotor motor setpoints */ |
|
|
|
if (msg->msgid == MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT) { |
|
mavlink_set_quad_motors_setpoint_t quad_motors_setpoint; |
|
mavlink_msg_set_quad_motors_setpoint_decode(msg, &quad_motors_setpoint); |
|
// printf("got MAVLINK_MSG_ID_SET_QUAD_MOTORS_SETPOINT target_system=%u, sysid = %u\n", quad_motors_setpoint.target_system, mavlink_system.sysid); |
|
|
|
if (quad_motors_setpoint.target_system == mavlink_system.sysid) { |
|
ardrone_motors.motor_front_nw = quad_motors_setpoint.motor_front_nw; |
|
ardrone_motors.motor_right_ne = quad_motors_setpoint.motor_right_ne; |
|
ardrone_motors.motor_back_se = quad_motors_setpoint.motor_back_se; |
|
ardrone_motors.motor_left_sw = quad_motors_setpoint.motor_left_sw; |
|
|
|
ardrone_motors.counter++; |
|
ardrone_motors.timestamp = hrt_absolute_time(); |
|
|
|
/* check if topic has to be advertised */ |
|
if (ardrone_motors_pub <= 0) { |
|
ardrone_motors_pub = orb_advertise(ORB_ID(ardrone_motors_setpoint), &ardrone_motors); |
|
} |
|
/* Publish */ |
|
orb_publish(ORB_ID(ardrone_motors_setpoint), ardrone_motors_pub, &ardrone_motors); |
|
} |
|
} |
|
|
|
/* |
|
* Only decode hil messages in HIL mode. |
|
* |
|
* The HIL mode is enabled by the HIL bit flag |
|
* in the system mode. Either send a set mode |
|
* COMMAND_LONG message or a SET_MODE message |
|
*/ |
|
|
|
// printf("\n HIL ENABLED?: %s \n",(mavlink_hil_enabled)?"true":"false"); |
|
|
|
if (mavlink_hil_enabled) { |
|
|
|
if (msg->msgid == MAVLINK_MSG_ID_HIL_STATE) { |
|
|
|
mavlink_hil_state_t hil_state; |
|
mavlink_msg_hil_state_decode(msg, &hil_state); |
|
|
|
// printf("\n HILSTATE : \n LAT: %i \n LON: %i \n ALT: %i \n " |
|
// "ROLL %i \n PITCH %i \n YAW %i \n" |
|
// "ROLLSPEED: %i \n PITCHSPEED: %i \n, YAWSPEED: %i \n", |
|
// hil_state.lat/1000000, // 1e7 |
|
// hil_state.lon/1000000, // 1e7 |
|
// hil_state.alt/1000, // mm |
|
// hil_state.roll, // float rad |
|
// hil_state.pitch, // float rad |
|
// hil_state.yaw, // float rad |
|
// hil_state.rollspeed, // float rad/s |
|
// hil_state.pitchspeed, // float rad/s |
|
// hil_state.yawspeed); // float rad/s |
|
|
|
|
|
hil_global_pos.lat = hil_state.lat; |
|
hil_global_pos.lon = hil_state.lon; |
|
hil_global_pos.alt = hil_state.alt/1000; |
|
hil_global_pos.vx = hil_state.vx; |
|
hil_global_pos.vy = hil_state.vy; |
|
hil_global_pos.vz = hil_state.vz; |
|
|
|
/* set timestamp and notify processes (broadcast) */ |
|
hil_global_pos.timestamp = hrt_absolute_time(); |
|
orb_publish(ORB_ID(vehicle_global_position), pub_hil_global_pos, &hil_global_pos); |
|
|
|
hil_attitude.roll = hil_state.roll; |
|
hil_attitude.pitch = hil_state.pitch; |
|
hil_attitude.yaw = hil_state.yaw; |
|
hil_attitude.rollspeed = hil_state.rollspeed; |
|
hil_attitude.pitchspeed = hil_state.pitchspeed; |
|
hil_attitude.yawspeed = hil_state.yawspeed; |
|
|
|
/* set timestamp and notify processes (broadcast) */ |
|
hil_attitude.counter++; |
|
hil_attitude.timestamp = hrt_absolute_time(); |
|
orb_publish(ORB_ID(vehicle_attitude), pub_hil_attitude, &hil_attitude); |
|
} |
|
} |
|
} |
|
|
|
int mavlink_open_uart(int baudrate, const char *uart_name, struct termios *uart_config_original, bool *is_usb) |
|
{ |
|
/* process baud rate */ |
|
int speed; |
|
|
|
switch (baudrate) { |
|
case 0: speed = B0; break; |
|
|
|
case 50: speed = B50; break; |
|
|
|
case 75: speed = B75; break; |
|
|
|
case 110: speed = B110; break; |
|
|
|
case 134: speed = B134; break; |
|
|
|
case 150: speed = B150; break; |
|
|
|
case 200: speed = B200; break; |
|
|
|
case 300: speed = B300; break; |
|
|
|
case 600: speed = B600; break; |
|
|
|
case 1200: speed = B1200; break; |
|
|
|
case 1800: speed = B1800; break; |
|
|
|
case 2400: speed = B2400; break; |
|
|
|
case 4800: speed = B4800; break; |
|
|
|
case 9600: speed = B9600; break; |
|
|
|
case 19200: speed = B19200; break; |
|
|
|
case 38400: speed = B38400; break; |
|
|
|
case 57600: speed = B57600; break; |
|
|
|
case 115200: speed = B115200; break; |
|
|
|
case 230400: speed = B230400; break; |
|
|
|
case 460800: speed = B460800; break; |
|
|
|
case 921600: speed = B921600; break; |
|
|
|
default: |
|
fprintf(stderr, "[mavlink] ERROR: Unsupported baudrate: %d\n\tsupported examples:\n\n\t9600\n19200\n38400\n57600\n115200\n230400\n460800\n921600\n\n", baudrate); |
|
return -EINVAL; |
|
} |
|
|
|
/* open uart */ |
|
printf("[mavlink] UART is %s, baudrate is %d\n", uart_name, baudrate); |
|
uart = open(uart_name, O_RDWR | O_NOCTTY); |
|
|
|
/* Try to set baud rate */ |
|
struct termios uart_config; |
|
int termios_state; |
|
*is_usb = false; |
|
|
|
if (strcmp(uart_name, "/dev/ttyACM0") != OK) { |
|
/* Back up the original uart configuration to restore it after exit */ |
|
if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { |
|
fprintf(stderr, "[mavlink] ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); |
|
close(uart); |
|
return -1; |
|
} |
|
|
|
/* Fill the struct for the new configuration */ |
|
tcgetattr(uart, &uart_config); |
|
|
|
/* Clear ONLCR flag (which appends a CR for every LF) */ |
|
uart_config.c_oflag &= ~ONLCR; |
|
|
|
/* Set baud rate */ |
|
if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { |
|
fprintf(stderr, "[mavlink] ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); |
|
close(uart); |
|
return -1; |
|
} |
|
|
|
|
|
if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { |
|
fprintf(stderr, "[mavlink] ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); |
|
close(uart); |
|
return -1; |
|
} |
|
|
|
} else { |
|
*is_usb = true; |
|
} |
|
|
|
return uart; |
|
} |
|
|
|
/** |
|
* MAVLink Protocol main function. |
|
*/ |
|
int mavlink_thread_main(int argc, char *argv[]) |
|
{ |
|
wpm = &wpm_s; |
|
|
|
/* initialize global data structs */ |
|
memset(&global_pos, 0, sizeof(global_pos)); |
|
memset(&local_pos, 0, sizeof(local_pos)); |
|
memset(&v_status, 0, sizeof(v_status)); |
|
memset(&rc, 0, sizeof(rc)); |
|
memset(&hil_attitude, 0, sizeof(hil_attitude)); |
|
memset(&hil_global_pos, 0, sizeof(hil_global_pos)); |
|
memset(&fw_control, 0, sizeof(fw_control)); |
|
memset(&ardrone_motors, 0, sizeof(ardrone_motors)); |
|
memset(&vcmd, 0, sizeof(vcmd)); |
|
|
|
/* print welcome text */ |
|
printf("[mavlink] MAVLink v1.0 serial interface starting..\n"); |
|
|
|
/* reate the device node that's used for sending text log messages, etc. */ |
|
register_driver(MAVLINK_LOG_DEVICE, &mavlink_fops, 0666, NULL); |
|
|
|
/* default values for arguments */ |
|
char *uart_name = "/dev/ttyS0"; |
|
int baudrate = 57600; |
|
|
|
/* read program arguments */ |
|
int i; |
|
|
|
for (i = 1; i < argc; i++) { /* argv[0] is "mavlink" */ |
|
|
|
if (strcmp(argv[i], "-h") == 0 || strcmp(argv[i], "--help") == 0) { |
|
usage(""); |
|
return 0; |
|
} else if (strcmp(argv[i], "-d") == 0 || strcmp(argv[i], "--device") == 0) { |
|
if (argc > i + 1) { |
|
uart_name = argv[i + 1]; |
|
i++; |
|
} else { |
|
usage("missing argument for device (-d)"); |
|
return 1; |
|
} |
|
} else if (strcmp(argv[i], "-b") == 0 || strcmp(argv[i], "--baud") == 0) { |
|
if (argc > i + 1) { |
|
baudrate = atoi(argv[i + 1]); |
|
i++; |
|
} else { |
|
usage("missing argument for baud rate (-b)"); |
|
return 1; |
|
} |
|
} else if (strcmp(argv[i], "-e") == 0 || strcmp(argv[i], "--exit-allowed") == 0) { |
|
mavlink_link_termination_allowed = true; |
|
} else if (strcmp(argv[i], "-o") == 0 || strcmp(argv[i], "--onboard") == 0) { |
|
mavlink_link_mode = MAVLINK_INTERFACE_MODE_ONBOARD; |
|
} else { |
|
usage("out of order or invalid argument"); |
|
return 1; |
|
} |
|
} |
|
|
|
struct termios uart_config_original; |
|
|
|
bool usb_uart; |
|
|
|
uart = mavlink_open_uart(baudrate, uart_name, &uart_config_original, &usb_uart); |
|
|
|
if (uart < 0) { |
|
printf("[mavlink] FAILED to open %s, terminating.\n", uart_name); |
|
goto exit_cleanup; |
|
} |
|
|
|
/* Flush UART */ |
|
fflush(stdout); |
|
|
|
/* Initialize system properties */ |
|
param_t param_system_id = param_find("MAV_SYS_ID"); |
|
param_t param_component_id = param_find("MAV_COMP_ID"); |
|
param_t param_system_type = param_find("MAV_TYPE"); |
|
|
|
/* topics to subscribe globally */ |
|
/* subscribe to ORB for global position */ |
|
mavlink_subs.global_pos_sub = orb_subscribe(ORB_ID(vehicle_global_position)); |
|
orb_set_interval(mavlink_subs.global_pos_sub, 1000); /* 1Hz active updates */ |
|
/* subscribe to ORB for local position */ |
|
local_pos_sub = orb_subscribe(ORB_ID(vehicle_local_position)); |
|
orb_set_interval(local_pos_sub, 1000); /* 1Hz active updates */ |
|
|
|
|
|
pthread_attr_t receiveloop_attr; |
|
pthread_attr_init(&receiveloop_attr); |
|
pthread_attr_setstacksize(&receiveloop_attr, 2048); |
|
pthread_create(&receive_thread, &receiveloop_attr, receiveloop, &uart); |
|
|
|
pthread_attr_t uorb_attr; |
|
pthread_attr_init(&uorb_attr); |
|
/* Set stack size, needs more than 4000 bytes */ |
|
pthread_attr_setstacksize(&uorb_attr, 4096); |
|
pthread_create(&uorb_receive_thread, &uorb_attr, uorb_receiveloop, &mavlink_subs); |
|
|
|
/* initialize waypoint manager */ |
|
mavlink_wpm_init(wpm); |
|
|
|
uint16_t counter = 0; |
|
/* arm counter to go off immediately */ |
|
int lowspeed_counter = 10; |
|
|
|
/* make sure all threads have registered their subscriptions */ |
|
while (!mavlink_subs.initialized) { |
|
usleep(500); |
|
} |
|
|
|
/* all subscriptions are now active, set up initial guess about rate limits */ |
|
if (baudrate >= 921600) { |
|
/* 500 Hz / 2 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SCALED_IMU, 2); |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_ATTITUDE, 2); |
|
/* 200 Hz / 5 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 5); |
|
/* 5 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_MANUAL_CONTROL, 200); |
|
} else if (baudrate >= 460800) { |
|
/* 250 Hz / 4 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SCALED_IMU, 5); |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_ATTITUDE, 5); |
|
/* 50 Hz / 20 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 20); |
|
/* 2 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_MANUAL_CONTROL, 500); |
|
} else if (baudrate >= 115200) { |
|
/* 50 Hz / 20 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SCALED_IMU, 50); |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_ATTITUDE, 50); |
|
/* 10 Hz / 100 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 100); |
|
/* 1 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_MANUAL_CONTROL, 1000); |
|
} else if (baudrate >= 57600) { |
|
/* 10 Hz / 100 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SCALED_IMU, 100); |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_ATTITUDE, 100); |
|
/* 5 Hz / 200 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 200); |
|
/* 0.2 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_MANUAL_CONTROL, 5000); |
|
} else { |
|
/* very low baud rate, limit to 1 Hz / 1000 ms */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SCALED_IMU, 1000); |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_ATTITUDE, 1000); |
|
/* 0.5 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 2000); |
|
/* 0.1 Hz */ |
|
set_mavlink_interval_limit(&mavlink_subs, MAVLINK_MSG_ID_MANUAL_CONTROL, 10000); |
|
} |
|
|
|
thread_running = true; |
|
|
|
while (!thread_should_exit) { |
|
|
|
/* get local and global position */ |
|
orb_copy(ORB_ID(vehicle_global_position), mavlink_subs.global_pos_sub, &global_pos); |
|
orb_copy(ORB_ID(vehicle_local_position), local_pos_sub, &local_pos); |
|
|
|
/* 1 Hz */ |
|
if (lowspeed_counter == 10) { |
|
/* update system and component id */ |
|
int32_t system_id; |
|
param_get(param_system_id, &system_id); |
|
if (system_id > 0 && system_id < 255) { |
|
mavlink_system.sysid = system_id; |
|
} |
|
|
|
int32_t component_id; |
|
param_get(param_component_id, &component_id); |
|
if (component_id > 0 && component_id < 255) { |
|
mavlink_system.compid = component_id; |
|
} |
|
|
|
int32_t system_type; |
|
param_get(param_system_type, &system_type); |
|
if (system_type >= 0 && system_type < MAV_AUTOPILOT_ENUM_END) { |
|
mavlink_system.type = system_type; |
|
} |
|
|
|
/* translate the current syste state to mavlink state and mode */ |
|
uint8_t mavlink_state = 0; |
|
uint8_t mavlink_mode = 0; |
|
get_mavlink_mode_and_state(&v_status, &mavlink_state, &mavlink_mode); |
|
|
|
/* send heartbeat */ |
|
mavlink_msg_heartbeat_send(chan, system_type, MAV_AUTOPILOT_PX4, mavlink_mode, v_status.state_machine, mavlink_state); |
|
|
|
/* send status (values already copied in the section above) */ |
|
mavlink_msg_sys_status_send(chan, v_status.onboard_control_sensors_present, v_status.onboard_control_sensors_enabled, |
|
v_status.onboard_control_sensors_health, v_status.load, v_status.voltage_battery * 1000.f, v_status.current_battery * 1000.f, |
|
v_status.battery_remaining, v_status.drop_rate_comm, v_status.errors_comm, |
|
v_status.errors_count1, v_status.errors_count2, v_status.errors_count3, v_status.errors_count4); |
|
|
|
/* send over MAVLink */ |
|
if ((hrt_absolute_time() - rc.timestamp) < 200000) { |
|
mavlink_msg_rc_channels_raw_send(chan, rc.timestamp / 1000, 0, rc.chan[0].raw, rc.chan[1].raw, rc.chan[2].raw, rc.chan[3].raw, |
|
rc.chan[4].raw, rc.chan[5].raw, rc.chan[6].raw, rc.chan[7].raw, rc.rssi); |
|
} |
|
|
|
lowspeed_counter = 0; |
|
} |
|
lowspeed_counter++; |
|
|
|
/* sleep quarter the time */ |
|
usleep(25000); |
|
|
|
/* check if waypoint has been reached against the last positions */ |
|
mavlink_waypoint_eventloop(mavlink_missionlib_get_system_timestamp(), &global_pos, &local_pos); |
|
|
|
/* sleep quarter the time */ |
|
usleep(25000); |
|
|
|
/* send parameters at 20 Hz (if queued for sending) */ |
|
mavlink_pm_queued_send(); |
|
/* sleep quarter the time */ |
|
usleep(25000); |
|
mavlink_pm_queued_send(); |
|
|
|
/* sleep 10 ms */ |
|
usleep(10000); |
|
|
|
/* send one string at 10 Hz */ |
|
mavlink_missionlib_send_gcs_string(mavlink_message_string); |
|
mavlink_message_string[0] = '\0'; |
|
counter++; |
|
|
|
/* sleep 15 ms */ |
|
usleep(15000); |
|
} |
|
|
|
/* wait for threads to complete */ |
|
pthread_join(receive_thread, NULL); |
|
pthread_join(uorb_receive_thread, NULL); |
|
|
|
/* Reset the UART flags to original state */ |
|
if (!usb_uart) { |
|
int termios_state; |
|
|
|
if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config_original)) < 0) { |
|
fprintf(stderr, "[mavlink] ERROR setting baudrate / termios config for %s (tcsetattr)\r\n", uart_name); |
|
} |
|
|
|
printf("[mavlink] Restored original UART config, exiting..\n"); |
|
} |
|
|
|
exit_cleanup: |
|
|
|
/* close uart */ |
|
close(uart); |
|
|
|
/* close subscriptions */ |
|
close(mavlink_subs.global_pos_sub); |
|
close(local_pos_sub); |
|
|
|
fflush(stdout); |
|
fflush(stderr); |
|
|
|
thread_running = false; |
|
|
|
return 0; |
|
} |
|
|
|
static void |
|
usage(const char *reason) |
|
{ |
|
if (reason) |
|
fprintf(stderr, "%s\n", reason); |
|
fprintf(stderr, "usage: mavlink {start|stop|status} [-d <devicename>] [-b <baudrate>] [-e/--exit-allowed]\n\n"); |
|
exit(1); |
|
} |
|
|
|
int mavlink_main(int argc, char *argv[]) |
|
{ |
|
if (argc < 1) |
|
usage("missing command"); |
|
|
|
if (!strcmp(argv[1], "start")) { |
|
|
|
if (thread_running) { |
|
printf("mavlink already running\n"); |
|
/* this is not an error */ |
|
exit(0); |
|
} |
|
|
|
thread_should_exit = false; |
|
mavlink_task = task_create("mavlink", SCHED_PRIORITY_DEFAULT, 4400, mavlink_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); |
|
exit(0); |
|
} |
|
|
|
if (!strcmp(argv[1], "stop")) { |
|
thread_should_exit = true; |
|
exit(0); |
|
} |
|
|
|
if (!strcmp(argv[1], "status")) { |
|
if (thread_running) { |
|
printf("\tmavlink app is running\n"); |
|
} else { |
|
printf("\tmavlink app not started\n"); |
|
} |
|
exit(0); |
|
} |
|
|
|
usage("unrecognized command"); |
|
exit(1); |
|
} |
|
|
|
|