You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
mcsauder 3b72f3b641 Create publish_status() method in the heater driver, add a status field to indicate if the temperature setpoint has been met within 2.5C, breakout update_params() method from the Heater::Run() method and simplify logic. 4 years ago
..
bootloader ROMFS handle bl_update generically 4 years ago
init add board architecture specific init defaults 4 years ago
nuttx-config boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 4 years ago
src rc: enable crsf and ghst telemetry on supported boards 4 years ago
ctrlalloc.cmake boards: move testing to dedicated test variants 4 years ago
debug.cmake boards: move testing to dedicated test variants 4 years ago
default.cmake Create publish_status() method in the heater driver, add a status field to indicate if the temperature setpoint has been met within 2.5C, breakout update_params() method from the Heater::Run() method and simplify logic. 4 years ago
firmware.prototype boards organization 6 years ago
fixedwing.cmake icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 4 years ago
multicopter.cmake boards: move testing to dedicated test variants 4 years ago
optimized.cmake cmake: embed param metadata if not CONSTRAINED_FLASH and not "test" LABEL 4 years ago
rover.cmake icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 4 years ago
rtps.cmake boards: move testing to dedicated test variants 4 years ago
stackcheck.cmake boards: move testing to dedicated test variants 4 years ago
test.cmake boards: move testing to dedicated test variants 4 years ago
uavcanv0periph.cmake boards: move testing to dedicated test variants 4 years ago
uavcanv1.cmake boards: move testing to dedicated test variants 4 years ago