zrzk
/
zr-v4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

Global: remove minlure 

Minlure is a port of ArduPilot to Minnow Board connected to daughter
board. Very few of those were produced and nobody is flying with it.

It served its purpose and all the the improvements to ArduPilot remain
regardless of it not being supported anymore. Now it's just adding
maintenance work with no clear benefit, so pull the plug.
master
Lucas De Marchi 7 years ago
parent
d31e85e738
commit
49d08ba72a
20 changed files with 9 additions and 176 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 1
      BUILD.md
  2. 9
      Tools/ardupilotwaf/boards.py
  3. 6
      libraries/AP_BattMonitor/AP_BattMonitor_Analog.h
  4. 12
      libraries/AP_Compass/AP_Compass.cpp
  5. 1
      libraries/AP_HAL/AP_HAL_Boards.h
  6. 24
      libraries/AP_HAL/board/linux.h
  7. 2
      libraries/AP_HAL_Linux/AnalogIn_IIO.h
  8. 3
      libraries/AP_HAL_Linux/Flow_PX4.cpp
  9. 2
      libraries/AP_HAL_Linux/GPIO.h
  10. 37
      libraries/AP_HAL_Linux/GPIO_Minnow.cpp
  11. 29
      libraries/AP_HAL_Linux/GPIO_Minnow.h
  12. 18
      libraries/AP_HAL_Linux/HAL_Linux_Class.cpp
  13. 20
      libraries/AP_HAL_Linux/OpticalFlow_Onboard.cpp
  14. 4
      libraries/AP_HAL_Linux/SPIDevice.cpp
  15. 3
      libraries/AP_HAL_Linux/VideoIn.cpp
  16. 3
      libraries/AP_HAL_Linux/benchmarks/benchmark_videoin.cpp
  17. 2
      libraries/AP_InertialSensor/AP_InertialSensor_Invensense.cpp
  18. 3
      libraries/AP_Notify/AP_Notify.cpp
  19. 3
      libraries/AP_OpticalFlow/AP_OpticalFlow_Onboard.cpp
  20. 3
      libraries/AP_OpticalFlow/OpticalFlow.cpp

1
BUILD.md
Unescape View File

@ -59,7 +59,6 @@ list some basic and more used commands as example. @@ -59,7 +59,6 @@ list some basic and more used commands as example.
```sh
./waf configure --board bebop --static # Bebop or Bebop2
./waf configure --board edge # emlid edge
./waf configure --board minilure # minilure linux flight controller
./waf configure --board navio2 # emlid navio2
./waf configure --board px4-v1 # the very old two layer Pixhawk (almost none exist)
./waf configure --board px4-v2 # older Pixhawks that suffer from the 1MB flash limit issue

9
Tools/ardupilotwaf/boards.py
Unescape View File

@ -449,15 +449,6 @@ class linux(Board): @@ -449,15 +449,6 @@ class linux(Board):
# Avoid infinite recursion
bld.options.upload = False
class minlure(linux):
def configure_env(self, cfg, env):
super(minlure, self).configure_env(cfg, env)
env.DEFINES.update(
CONFIG_HAL_BOARD_SUBTYPE = 'HAL_BOARD_SUBTYPE_LINUX_MINLURE',
)
class erleboard(linux):
toolchain = 'arm-linux-gnueabihf'

6
libraries/AP_BattMonitor/AP_BattMonitor_Analog.h
Unescape View File

@ -75,12 +75,6 @@ @@ -75,12 +75,6 @@
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
# define AP_BATT_VOLT_PIN 2
# define AP_BATT_CURR_PIN 3
# define AP_BATT_VOLTDIVIDER_DEFAULT 10.1f
# define AP_BATT_CURR_AMP_PERVOLT_DEFAULT 17.0f
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX && (CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2)
# define AP_BATT_VOLT_PIN 2
# define AP_BATT_CURR_PIN 3

12
libraries/AP_Compass/AP_Compass.cpp
Unescape View File

@ -803,18 +803,6 @@ void Compass::_detect_backends(void) @@ -803,18 +803,6 @@ void Compass::_detect_backends(void)
AP_Compass_AK8963::name, false);
ADD_BACKEND(DRIVER_AK8963, AP_Compass_AK8963::probe_mpu9250(*this, 1),
AP_Compass_AK8963::name, true);
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
ADD_BACKEND(DRIVER_HMC5883, AP_Compass_HMC5843::probe_mpu6000(*this),
AP_Compass_HMC5843::name, false);
ADD_BACKEND(DRIVER_HMC5883, AP_Compass_HMC5843::probe(*this,
Linux::I2CDeviceManager::from(hal.i2c_mgr)->get_device(
{ /* UEFI with lpss set to ACPI */
"platform/80860F41:05",
/* UEFI with lpss set to PCI */
"pci0000:00/0000:00:18.6" },
HAL_COMPASS_HMC5843_I2C_ADDR),
true),
AP_Compass_HMC5843::name, true);
#elif HAL_COMPASS_DEFAULT == HAL_COMPASS_NAVIO2
ADD_BACKEND(DRIVER_LSM9DS1, AP_Compass_LSM9DS1::probe(*this, hal.spi->get_device("lsm9ds1_m"), ROTATION_ROLL_180),
AP_Compass_LSM9DS1::name, false);

1
libraries/AP_HAL/AP_HAL_Boards.h
Unescape View File

@ -26,7 +26,6 @@ @@ -26,7 +26,6 @@
#define HAL_BOARD_SUBTYPE_LINUX_ZYNQ 1004
#define HAL_BOARD_SUBTYPE_LINUX_BBBMINI 1005
#define HAL_BOARD_SUBTYPE_LINUX_BEBOP 1006
#define HAL_BOARD_SUBTYPE_LINUX_MINLURE 1008
#define HAL_BOARD_SUBTYPE_LINUX_ERLEBRAIN2 1009
#define HAL_BOARD_SUBTYPE_LINUX_BH 1010
#define HAL_BOARD_SUBTYPE_LINUX_PXFMINI 1012

24
libraries/AP_HAL/board/linux.h
Unescape View File

@ -118,30 +118,6 @@ @@ -118,30 +118,6 @@
#define HAL_RANGEFINDER_LIGHTWARE_I2C_BUS 0
// the disco has challenges with its magnetic setup
#define AP_COMPASS_OFFSETS_MAX_DEFAULT 2200
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#define HAL_INS_DEFAULT HAL_INS_MPU60XX_SPI
#define HAL_INS_DEFAULT_ROTATION ROTATION_YAW_90
#define HAL_INS_MPU60x0_NAME "mpu6000"
#define HAL_BARO_DEFAULT HAL_BARO_MS5611_I2C
#define HAL_BARO_MS5611_I2C_BUS { "platform/80860F41:06", }
#define HAL_BARO_MS5611_I2C_ADDR 0x77
/* Internal and external compasses */
#define HAL_COMPASS_HMC5843_I2C_ADDR 0x1E
#define HAL_OPTFLOW_ONBOARD_VDEV_PATH "/dev/video0"
#define HAL_OPTFLOW_ONBOARD_SENSOR_WIDTH 320
#define HAL_OPTFLOW_ONBOARD_SENSOR_HEIGHT 240
#define HAL_OPTFLOW_ONBOARD_OUTPUT_WIDTH 64
#define HAL_OPTFLOW_ONBOARD_OUTPUT_HEIGHT 64
#define HAL_OPTFLOW_ONBOARD_CROP_WIDTH 240
#define HAL_OPTFLOW_ONBOARD_CROP_HEIGHT 240
#define HAL_OPTFLOW_ONBOARD_NBUFS 8
#define HAL_FLOW_PX4_MAX_FLOW_PIXEL 4
#define HAL_FLOW_PX4_BOTTOM_FLOW_FEATURE_THRESHOLD 30
#define HAL_FLOW_PX4_BOTTOM_FLOW_VALUE_THRESHOLD 5000
/* ELP-USBFHD01M-L21
* focal length 2.1 mm, pixel size 3 um
* 240x240 crop rescaled to 64x64 */
#define HAL_FLOW_PX4_FOCAL_LENGTH_MILLIPX (2.1 / (3.0 * 2.0 * 240 / 64))
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO
#define HAL_GPIO_A_LED_PIN 0
#define HAL_GPIO_B_LED_PIN 1

2
libraries/AP_HAL_Linux/AnalogIn_IIO.h
Unescape View File

@ -18,8 +18,6 @@ @@ -18,8 +18,6 @@
#define IIO_VOLTAGE_SCALING 1.8/4095.0
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_POCKET
#define IIO_VOLTAGE_SCALING 3.0*1.8/4095.0
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#define IIO_VOLTAGE_SCALING 2.0 / 1000
#else
#define IIO_VOLTAGE_SCALING 1.0
#endif

3
libraries/AP_HAL_Linux/Flow_PX4.cpp
Unescape View File

@ -37,8 +37,7 @@ @@ -37,8 +37,7 @@
*
****************************************************************************/
#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#include "Flow_PX4.h"
#include <cmath>

2
libraries/AP_HAL_Linux/GPIO.h
Unescape View File

@ -35,8 +35,6 @@ private: @@ -35,8 +35,6 @@ private:
#include "GPIO_Navio2.h"
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_EDGE
#include "GPIO_Edge.h"
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#include "GPIO_Minnow.h"
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#include "GPIO_Bebop.h"
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_DISCO

37
libraries/AP_HAL_Linux/GPIO_Minnow.cpp
Unescape View File

@ -1,37 +0,0 @@ @@ -1,37 +0,0 @@
#include <AP_Common/AP_Common.h>
#include "GPIO_Minnow.h"
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
const unsigned Linux::GPIO_Sysfs::pin_table[] = {
[MINNOW_GPIO_SPI_CS] = 476,
[MINNOW_GPIO_SPI_MISO] = 477,
[MINNOW_GPIO_SPI_MOSI] = 478,
[MINNOW_GPIO_SPI_CLK] = 479,
[MINNOW_GPIO_I2C_SCL] = 499,
[MINNOW_GPIO_I2C_SDA] = 498,
[MINNOW_GPIO_UART2_TXD] = 485,
[MINNOW_GPIO_UART2_RXD] = 484,
[MINNOW_GPIO_S5_0] = 338,
[MINNOW_GPIO_S5_1] = 339,
[MINNOW_GPIO_S5_2] = 340,
[MINNOW_GPIO_UART1_TXD] = 481,
[MINNOW_GPIO_UART1_RXD] = 480,
[MINNOW_GPIO_UART1_CTS] = 483,
[MINNOW_GPIO_UART1_RTS] = 482,
[MINNOW_GPIO_I2S_CLK] = 472,
[MINNOW_GPIO_I2S_FRM] = 473,
[MINNOW_GPIO_I2S_DO] = 475,
[MINNOW_GPIO_I2S_DI] = 474,
[MINNOW_GPIO_PWM0] = 504,
[MINNOW_GPIO_PWM1] = 505,
[MINNOW_GPIO_IBL_8254] = 464,
};
const uint8_t Linux::GPIO_Sysfs::n_pins = _MINNOW_GPIO_MAX;
static_assert(ARRAY_SIZE(Linux::GPIO_Sysfs::pin_table) == _MINNOW_GPIO_MAX,
"GPIO pin_table must have the same size of entries in enum gpio_minnow");
#endif

29
libraries/AP_HAL_Linux/GPIO_Minnow.h
Unescape View File

@ -1,29 +0,0 @@ @@ -1,29 +0,0 @@
#pragma once
#include "GPIO_Sysfs.h"
enum gpio_minnow {
MINNOW_GPIO_SPI_CS,
MINNOW_GPIO_SPI_MISO,
MINNOW_GPIO_SPI_MOSI,
MINNOW_GPIO_SPI_CLK,
MINNOW_GPIO_I2C_SCL,
MINNOW_GPIO_I2C_SDA,
MINNOW_GPIO_UART2_TXD,
MINNOW_GPIO_UART2_RXD,
MINNOW_GPIO_S5_0,
MINNOW_GPIO_S5_1,
MINNOW_GPIO_S5_2,
MINNOW_GPIO_UART1_TXD,
MINNOW_GPIO_UART1_RXD,
MINNOW_GPIO_UART1_CTS,
MINNOW_GPIO_UART1_RTS,
MINNOW_GPIO_I2S_CLK,
MINNOW_GPIO_I2S_FRM,
MINNOW_GPIO_I2S_DO,
MINNOW_GPIO_I2S_DI,
MINNOW_GPIO_PWM0,
MINNOW_GPIO_PWM1,
MINNOW_GPIO_IBL_8254,
_MINNOW_GPIO_MAX,
};

18
libraries/AP_HAL_Linux/HAL_Linux_Class.cpp
Unescape View File

@ -87,8 +87,7 @@ static AnalogIn_ADS1115 analogIn; @@ -87,8 +87,7 @@ static AnalogIn_ADS1115 analogIn;
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_ERLEBOARD || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BBBMINI || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BLUE || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_POCKET || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_POCKET
static AnalogIn_IIO analogIn;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2 || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_EDGE
@ -120,8 +119,7 @@ static GPIO_RPI gpioDriver; @@ -120,8 +119,7 @@ static GPIO_RPI gpioDriver;
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2 || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_EDGE
static GPIO_Sysfs gpioDriver;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP || \
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_DISCO || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_AERO
static GPIO_Sysfs gpioDriver;
@ -150,8 +148,6 @@ static RCInput_RPI rcinDriver; @@ -150,8 +148,6 @@ static RCInput_RPI rcinDriver;
static RCInput_ZYNQ rcinDriver;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
static RCInput_UDP rcinDriver;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
static RCInput_UART rcinDriver("/dev/ttyS5");
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_DISCO
static RCInput_Multi rcinDriver{2, new RCInput_SBUS, new RCInput_115200("/dev/uart-sumd")};
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_AERO
@ -191,13 +187,6 @@ static RCOutput_PCA9685 rcoutDriver(i2c_mgr_instance.get_device(1, PCA9685_QUINA @@ -191,13 +187,6 @@ static RCOutput_PCA9685 rcoutDriver(i2c_mgr_instance.get_device(1, PCA9685_QUINA
static RCOutput_ZYNQ rcoutDriver;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
static RCOutput_Bebop rcoutDriver(i2c_mgr_instance.get_device(HAL_RCOUT_BEBOP_BLDC_I2C_BUS, HAL_RCOUT_BEBOP_BLDC_I2C_ADDR));
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
static RCOutput_PCA9685 rcoutDriver(i2c_mgr_instance.get_device(
{ /* UEFI with lpss set to ACPI */
"platform/80860F41:05",
/* UEFI with lpss set to PCI */
"pci0000:00/0000:00:18.6" },
PCA9685_PRIMARY_ADDRESS), false, 0, MINNOW_GPIO_S5_1);
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_DISCO
static RCOutput_Disco rcoutDriver(i2c_mgr_instance.get_device(HAL_RCOUT_DISCO_BLDC_I2C_BUS, HAL_RCOUT_DISCO_BLDC_I2C_ADDR));
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2
@ -214,8 +203,7 @@ static Empty::RCOutput rcoutDriver; @@ -214,8 +203,7 @@ static Empty::RCOutput rcoutDriver;
static Scheduler schedulerInstance;
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
static OpticalFlow_Onboard opticalFlow;
#else
static Empty::OpticalFlow opticalFlow;

20
libraries/AP_HAL_Linux/OpticalFlow_Onboard.cpp
Unescape View File

@ -14,8 +14,7 @@ @@ -14,8 +14,7 @@
*/
#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#include "OpticalFlow_Onboard.h"
#include <fcntl.h>
@ -92,23 +91,6 @@ void OpticalFlow_Onboard::init() @@ -92,23 +91,6 @@ void OpticalFlow_Onboard::init()
AP_HAL::panic("OpticalFlow_Onboard: couldn't set subdev fmt\n");
}
_format = V4L2_PIX_FMT_NV12;
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
std::vector<uint32_t> pixel_formats;
_videoin->get_pixel_formats(&pixel_formats);
for (uint32_t px_fmt : pixel_formats) {
if (px_fmt == V4L2_PIX_FMT_NV12 || px_fmt == V4L2_PIX_FMT_GREY) {
_format = px_fmt;
break;
}
/* if V4L2_PIX_FMT_YUYV format is found we still iterate through
* the vector since the other formats need no conversions. */
if (px_fmt == V4L2_PIX_FMT_YUYV) {
_format = px_fmt;
}
}
#endif
if (!_videoin->set_format(&_width, &_height, &_format, &_bytesperline,

4
libraries/AP_HAL_Linux/SPIDevice.cpp
Unescape View File

@ -75,10 +75,6 @@ SPIDesc SPIDeviceManager::_device[] = { @@ -75,10 +75,6 @@ SPIDesc SPIDeviceManager::_device[] = {
SPIDesc("mpu6000", 2, 0, SPI_MODE_3, 8, BBB_P9_28, 500*1000, 20*MHZ),
SPIDesc("mpu9250", 2, 0, SPI_MODE_3, 8, BBB_P9_23, 1*MHZ, 11*MHZ),
};
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
SPIDesc SPIDeviceManager::_device[] = {
SPIDesc("mpu6000", 0, 0, SPI_MODE_3, 8, SPI_CS_KERNEL, 1*MHZ, 15*MHZ)
};
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_NAVIO2
SPIDesc SPIDeviceManager::_device[] = {
SPIDesc("mpu9250", 0, 1, SPI_MODE_0, 8, SPI_CS_KERNEL, 1*MHZ, 11*MHZ),

3
libraries/AP_HAL_Linux/VideoIn.cpp
Unescape View File

@ -18,8 +18,7 @@ @@ -18,8 +18,7 @@
*/
#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#include "VideoIn.h"
#include <errno.h>

3
libraries/AP_HAL_Linux/benchmarks/benchmark_videoin.cpp
Unescape View File

@ -1,8 +1,7 @@ @@ -1,8 +1,7 @@
#include <AP_gbenchmark.h>
#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#include <AP_HAL_Linux/VideoIn.h>

2
libraries/AP_InertialSensor/AP_InertialSensor_Invensense.cpp
Unescape View File

@ -31,8 +31,6 @@ extern const AP_HAL::HAL& hal; @@ -31,8 +31,6 @@ extern const AP_HAL::HAL& hal;
#include <AP_HAL_Linux/GPIO.h>
#if CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_ERLEBOARD || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_PXF
#define INVENSENSE_DRDY_PIN BBB_P8_14
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#define INVENSENSE_DRDY_PIN MINNOW_GPIO_I2S_CLK
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_DISCO || CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#define INVENSENSE_EXT_SYNC_ENABLE 1
#endif

3
libraries/AP_Notify/AP_Notify.cpp
Unescape View File

@ -208,9 +208,6 @@ void AP_Notify::add_backends(void) @@ -208,9 +208,6 @@ void AP_Notify::add_backends(void)
ADD_BACKEND(new Buzzer());
ADD_BACKEND(new Display());
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
ADD_BACKEND(new RCOutputRGBLedOff(15, 13, 14, 255));
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_ERLEBRAIN2 || \
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_PXFMINI
ADD_BACKEND(new AP_BoardLED());

3
libraries/AP_OpticalFlow/AP_OpticalFlow_Onboard.cpp
Unescape View File

@ -19,8 +19,7 @@ @@ -19,8 +19,7 @@
#include "OpticalFlow.h"
#if CONFIG_HAL_BOARD == HAL_BOARD_LINUX &&\
(CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE)
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
#ifndef OPTICALFLOW_ONBOARD_DEBUG
#define OPTICALFLOW_ONBOARD_DEBUG 0

3
libraries/AP_OpticalFlow/OpticalFlow.cpp
Unescape View File

@ -104,8 +104,7 @@ void OpticalFlow::init(void) @@ -104,8 +104,7 @@ void OpticalFlow::init(void)
}
#elif CONFIG_HAL_BOARD == HAL_BOARD_SITL
backend = new AP_OpticalFlow_SITL(*this);
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP ||\
CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_MINLURE
#elif CONFIG_HAL_BOARD_SUBTYPE == HAL_BOARD_SUBTYPE_LINUX_BEBOP
backend = new AP_OpticalFlow_Onboard(*this);
#elif CONFIG_HAL_BOARD == HAL_BOARD_LINUX
backend = AP_OpticalFlow_PX4Flow::detect(*this);

Write Preview
Loading…
Cancel
Save