0b1a6a2157
AP_NavEKF2: Clean up GPS timeout logic
9 years ago
f67f6b01f4
AP_AHRS: Publish the EKF position and velocity reset deltas
9 years ago
74da4d8e57
AP_NavEKF2: Remove GPS glitch offset logic
...
Correction for steps in position and velocity caused by resets following GPS glitches and other events are now handled by the control loops.
9 years ago
4fdec67546
AP_NavEKF2: Publish the position and velocity state reset deltas
...
Used by the control loops to compensate for step changes in position and velocity when the EKF needs to do a reset of these states.
9 years ago
7c40448bab
AP_NavEKF: Remove GPS glitch offset logic
...
The correction for offsets due to position and velocity resets will now be handled in the control loops.
9 years ago
5489ff9118
AP_NavEKF: publish position and velocity state reset data
...
Used by the control loops to compensate for steps in velocity and/or position resulting from state resets.
9 years ago
0d36c4c07b
GCS_MAVLink: version update after generate
9 years ago
bf9d4b5898
GCS_MAVLink: generate adds abort Alt label in MAV_CMD_NAV_LAND
...
code is already implemented and released
9 years ago
c52f16b86f
AC_WPNav: increase param description max for LOIT_JERK
9 years ago
606a0e0d0b
Copter: set jerk to default for circle and guided
9 years ago
49c4a133d7
AC_WPNav: set jerk separately for wpnav and loiter
9 years ago
ee0abb1750
AC_PosControl: add set_jerk_xy
9 years ago
853f8bfaf4
AC_WPNav: stop gradually in loiter
9 years ago
411e75b917
Copter: feed forward only used for AltHold, Loiter, PosHold
...
land modes use non-feedforward alt hold
9 years ago
73f4533995
AC_PosControl: minor comment update
9 years ago
895a40893d
AC_PosControl: use_desvel_ff flag added
...
This allows turning on/off desired velocity feedforward without setting desired_vel.z to zero. Setting desired_vel.z to zero has the side effect of disrupting the landing detection which needs to know if we are trying to descend
9 years ago
aec66c5db6
AC_PosControl: faster z-axis slowdown when over speed
9 years ago
245f7ce268
AC_PosControl: allow desired vel z to be above speed limit
9 years ago
f55c31a157
AC_PosControl: add alt hold without feed forward
9 years ago
3c3392aae5
Plane: improve error messages on failed parachute release
9 years ago
5d1d54a8cb
Plane: added CHUTE_CHAN parameter for manual release
9 years ago
d20b86b95e
Plane: suppress the throttle in auto-throttle modes after parachute release
9 years ago
9affddcaa3
Plane: initial support for AP_Parachute library
9 years ago
aee2543b75
AP_Parachute: fixed release bug
...
if release() is called within 1 millisecond of update() the release
wouldn't happen
9 years ago
0d9715cfe8
AP_Parachute: added a released() function
...
used to help with throttle suppression in plane
9 years ago
76871ef0cd
Tracker: fix start lat, lon sanity check
9 years ago
ca942f39dd
AP_Motors_Heli: remove unused allow_arming check
9 years ago
b49fda4a94
Copter: remove rotor spinning arming check from TradHeli
9 years ago
724f5511aa
SITL: support multiple jsbsim aircraft types
...
use -f jsbsim:ModelName
9 years ago
da3961e4a6
Copter: support MAV_CMD_DO_SEND_BANNER
9 years ago
e9cec1203a
GCS_MAVLink: version update after generate
9 years ago
e51498aa45
GCS_MAVLink: generate after adding DO_SEND_BANNER
9 years ago
36bb5a25a2
GCS_MAVLink: add MAV_CMD_DO_SEND_BANNER
9 years ago
02c4fdf519
Copter: 3.3.1 release notes
9 years ago
9de2ec04f6
AC_PrecLand: update comments to reflect change from bf_angle to angle
9 years ago
9e7099f5ee
AC_PrecLand: implement frame of reference
9 years ago
e409bd0a58
AC_PrecLand: rename bf_angle to angle
9 years ago
c228ea4371
AP_NavEKF2: prevent a valgrind error on startup
9 years ago
c762865d66
AP_Mount: use configured function to determine if MNT_TYPE has been configured
9 years ago
5486be34b1
Copter: use configured function to determine if heli_servo_rsc has been configured
9 years ago
f0f5239d8f
AP_L1_Control: use set_default for runtime param defaults
9 years ago
28f55766fd
Copter: use configured to check whether radio has been calibrated
9 years ago
21e7d46944
RC_Channel: use set_default for runtime param defaults
9 years ago
39246c13ad
AP_Param: add set_default, configured
9 years ago
87ea9acc7f
AP_NavEKF2: Fix mavlink parameter label
9 years ago
1cf626692c
AP_NavEKF: Reduce impact of altimeter flow disturbance error on Copter alt hold
...
This increase in assumed altimeter noise and reduction in accel noise has been flight tested by L.Hall with noticeable reduction in the immediate response to Baro errors during moving flight.
This increases the time constant of response to baro errors such that the pilot can more easily compensate.
9 years ago
e692e30988
AP_NavEKF2: Reduce allowance for magnetometer timing errors
...
The previous gain from rate to magnetometer error was excessive. The revised value is equivalent to a magnetic field length of 0.5 with a timing uncertainty of 0.01 sec
9 years ago
4c5ba60578
AP_NavEKF2: Remove dead code
9 years ago
142aa59bce
AP_InertialSensor: fixed vibration logging after recent changes
9 years ago
3dd47adafe
Plane: fixed a condition where takeoff switches to land
9 years ago
Paul Riseborough
Tom Pittenger
Randy Mackay
Jonathan Challinger
Leonard Hall
Andrew Tridgell
ggregory8
squilter