2e4b61d96e
AP_Notify: add scripting LED type
4 years ago
cf599952f5
AP_Notify: RGB LED remove unused varables
4 years ago
0668c5c584
AP_Scripting: support pass by refence on none bool return
4 years ago
b30c55b3f3
AP_GPS: Support yaw from moving base station on SBF drivers
4 years ago
4161e2eb28
AP_GPS: Factor out moving base offset helper
4 years ago
230798546e
RC_Channel: correct metadata for RC_OPTION param
4 years ago
0f5179d204
AP_Scheduler: Emit last internal error line
4 years ago
25ca2a0828
AP_Logger: Reserve space in PM for last internal error line
4 years ago
051640e2b2
AP_Math: Log line numbers on constrain_nan's for constrain float
4 years ago
2681d3afe2
AP_NavEKF3: simplify alignYawAngle
4 years ago
fc49b55b85
AP_NavEKF3: make coreBetterScore const
4 years ago
84c92b717f
AP_NavEKF2: make coreBetterScore const
4 years ago
c192efea0a
hwdef:PixracerPro - Fix analog volt pin assignments
4 years ago
e5ffc834e9
AP_Arming: Parameter check is not unused
4 years ago
46976c4358
HAL_ChibiOS: fixed remapping of ioline_t with BRD_ALT_CONFIG
...
when a peripheral is made available via BRD_ALT_CONFIG we need to
remap the existing ioline_t in the UART and I2C drivers to use the new
pin.
This fixes an issue with half-duplex, inverted, swapped UART pins for
protocols like FPort and FPort2
4 years ago
2dd58c8ed1
AP_RCProtocol: send null pkts for FPort2
...
when we have no data to send, we should send an empty packet to ensure
the receiver schedules us for data as often as possible
4 years ago
97b44dfe71
AP_Scripting: add DIR_DISABLE param
4 years ago
2bdcadd785
AP_Scripting: examples to load and save missions to the SD card
4 years ago
b726630ef4
AP_NavEKF3: pos timeout or glitch does not reset vel if fusing successfully
...
vel is not reset if GPS velocity, optical flow, visual odometry or wheel
encoders are successfully being fused
4 years ago
3b38aa6d7b
AP_NavEKF3: GPS change pos reset uses ResetPositonNE and ResetPositionD
...
Using these existing functions removes some code duplicate
non-functional change
4 years ago
73dea6d29c
AP_CANManager: return max number of drivers for get_num_drivers
4 years ago
917f7d8797
AP_PiccoloCAN: Update timeout values to use 64-bit calls
...
- Prevent premature overflow due to 32-bit variables
4 years ago
491499ad16
AP_PiccoloCAN: Fixed license text in auto-generated files
...
- License file had been replaced due to re-generation of protocol files
- Original license file and header text reverted
4 years ago
479df2e20b
AP_PiccoloCAN: Prevent thread from getting stuck in an infinite loop
...
- Previous code would get stuck in the CAN Tx loop
- New approach is to simply increase the timeout on frame transmission
4 years ago
6786e832a1
AP_PiccoloCAN: Provide compatibility for "Gen 2" Velociy ESC ICD
...
- The "Gen 2" Velocity ESC provides much more telemetry data
- The new ICD changes are compatible (i.e. legacy and modern ESCs can be on the CAN bus at the same time)
- Decode legacy packets and convert them to modern data structures
- Supports decoding of newer telemetry packets
- Supports decoding of new warning / error packets
4 years ago
d8337cf9e5
SITL: allow loading of model from ROMFS
4 years ago
e07cecb264
SITL: added support for simulated battery discharge
4 years ago
e8f21d3458
AP_InertialSensor: fixed rpm indexing for vtol motors
...
quadplane vtol motors start at 1
4 years ago
a0bc9d3148
SITL: fixed quadplane mass and rpm indexing
4 years ago
767773da5e
SITL: improved multicopter simulation
...
this takes account of motor expo, velocity of air over propellers,
mass, size and other factors
It also allows for frame parameters to be supplied as an external json file
4 years ago
c2661a0f09
SITL: added picojson.h header
...
will be used for custom frame parameters
4 years ago
7b898ee001
AP_NavEKF3: minor comment and format fixes
4 years ago
fccc1fcb72
AP_NavEKF2: minor comment fix
4 years ago
20c4f1950b
AP_RCProtocol: added FPort protocol test
4 years ago
df5105e20b
AP_RCProtocol: added FPort2 protocol test
4 years ago
a8770a5a82
AP_RCProtocol: added FPort2 protocol support
4 years ago
747b48d0a8
AP_Math: added crc_sum8
...
for FPort/FPort2
4 years ago
66596dcf25
AP_Logger: allow for retry of log open with LOG_DISARMED=1
...
if booting without a microSD and with LOG_DISARMED=1 then this allows
for a retry of opening the log every 5s
4 years ago
cd8404f80c
AP_BattMonitor: Update @value field in param to be increasing order
4 years ago
36204e5dae
AP_HAL_Linux: Fix PWM FS to follow the Kernel's 4.X instead 3.9
...
Checking the ToneAlarm under AP_HAL_Linux(BBBMINI is using that) I realize was using old kernek
3.9 device tree, so I updated to 4.X - this will affect only BBBMINI and
Blue boards.
4 years ago
eb880a2657
AP_Scripting: copter-wall-climber fix for climb rate limiting
4 years ago
eab7c9520c
AP_Scripting: copter-wall-climber accel limiting
...
reduces climb rate slowly so it can stop before next interval
also fixup formatting of altitude output to user
4 years ago
2ab860b8b7
AP_Scripting: copter-wall-climber format and comment fixes
...
replaced tab with spaces
also fixed comment
4 years ago
640990a7c7
AP_Compass: Fix TYPEMASK bitmask
4 years ago
e1126d4fd6
GCS_MAVLink: use micro64 instead of micros for time_usec
4 years ago
7aad83ccca
AP_Airspeed: add MATLAB based NMEA sensor example
4 years ago
0e41b821e8
AP_Airspeed: defualt to type none on sub
4 years ago
73594cb19b
GCS_MAVLink: send airspeed temp in scaled_pressure
4 years ago
2aff8787c1
AP_Airspeed: add NMEA water speed backend
4 years ago
9884c2c2ce
AP_SerialManager: add airspeed type
4 years ago
Iampete1
Michael du Breuil
Hwurzburg
Randy Mackay
Peter Barker
Phillip Kocmoud
Andre Kjellstrup
Andrew Tridgell
Siddharth Purohit
Oliver Walters
Rishabh
Vinicius Juvinski
giacomo892
Tatsuya Yamaguchi