With commit 24f4153 ("AP_HAL_Linux: RCOutput_PCA9685: group writes") a
log was introduced when we can't get the bus semaphore. However since we
are calling the non blocking method, failing there is not that unlikely
if the bus is shared. Return back to the previous behavior of not
logging.
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.
AVR-specific places were not changed.
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:
git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'
The 2 commands were done so we don't leave behind spurious spaces.
AVR-specific places were not changed.
The PSTR is already define as a NOP for all supported platforms. It's
only needed for AVR so here we remove all the uses throughout the
codebase.
This was automated with a simple python script so it also converts
places which spans to multiple lines, removing the matching parentheses.
AVR-specific places were not changed.
ardupilot/libraries/AP_HAL_Linux/Storage_FRAM.cpp: In member
function 'int32_t Linux::Storage_FRAM::read(uint16_t, uint8_t*, uint16_t)':
/home/lucas/p/dronecode/ardupilot/libraries/AP_HAL_Linux/Storage_FRAM.cpp:183:24: war
ning: comparison is always false due to limited range of data type [-Wtype-limits]
if(Buff[i-fptr]==-1){
^
This commit adds the class Linux::GPIO_Sysfs. This class provides a generic
implementation of AP_HAL::GPIO on Linux by using GPIO Sysfs Interface
(https://www.kernel.org/doc/Documentation/gpio/sysfs.txt).
The channel() interface should be preferred in places that need to be
fast. Since it maintains the file descriptor open this is much faster
than opening and closing it.
We are using a microcontroller to read the PWM input from RC. The read
values are sent to our board using a simple serial protocol through the
UART interface.
This patch interprets these values and passes them forward to the APM.
Move the macros to a single place and reduce the variations not based on
board, but based on
- The name of the entry-point function, specified by AP_MAIN;
- Whether it contains argc/argv arguments or not.
The goal here is that programs (vehicles and examples) don't need to
include all possible boards to define a main function. Further patches
will change the programs.
Instead of requiring every program to specify the HAL related modules,
let the build system do it (in practice everything we compiled depended
on HAL anyway). This allow including only the necessary files in the
compilation.
The switching between different AP_HAL was happening by giving different
definitions of AP_HAL_BOARD_DRIVER, and the programs would use it to
instantiate.
A program or library code would have to explicitly include (and depend)
on the concrete implementation of the HAL, even when using it only via
interface.
The proposed change move this dependency to be link time. There is a
AP_HAL::get_HAL() function that is used by the client code. Each
implementation of HAL provides its own definition of this function,
returning the appropriate concrete instance.
Since this replaces the job of AP_HAL_BOARD_DRIVER, the definition was
removed.
The static variables for PX4 and VRBRAIN were named differently to avoid
shadowing the extern symbol 'hal'.
This warning happens because of the difference of datatypes between
32 and 64 bits processors.
%% libraries/AP_HAL_Linux/RCInput_UDP.o
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp: In member function 'virtual void Linux::LinuxRCInput_UDP::_timer_tick()':
/home/zehortigoza/dev/ardupilot/libraries/AP_HAL_Linux/RCInput_UDP.cpp:42:72: warning: format '%llu' expects argument of type 'long long unsigned int', but argument 3 has type 'uint64_t {aka long unsigned int}' [-Wformat=]
hal.console->printf("no rc cmds received for %llu\n", delay);
It uses a heating resistor controlled by a pwm.
By changing the duty cycle of the pwm, we can control the temperature.
A simple PI algorithm is used in order to get to the correct temperature
fast enough and without too much overshoot
It is implemented as a member of the Util class in order not to make to much
modification to the current codebase
Fix warning and use htole16 instead of trying to implement it.
The current code does nothing on little endian platforms.
Moreover, the status variable was unused.
Instead of just doing a static cast to the desired class, use a method
named "from". Pros:
- When we have data shared on the parent class, the code is cleaner in
child class when it needs to access this data. Almost all the data
we use in AP_HAL benefits from this
- There's a minimal type checking because now we are using a method
that can only receive the type of the parent class
Víctor Mayoral Vilches
Lucas De Marchi
Gustavo Jose de Sousa
Fabio Mello
Caio Marcelo de Oliveira Filho
José Roberto de Souza
Julien BERAUD
raspilot
dgrat
mirkix
Andrew Tridgell