7877a872d3
added update throttle cruise function
13 years ago
a59c9ae22c
added notes
13 years ago
4b54887c6c
Switched to set_next_WP for mode switches
13 years ago
cf92631d33
added #if to wind compensation code
13 years ago
f68d23d91e
ArduCopter - added ROLL_PITCH_STABLE_OF (i.e. Stabilised Roll/Pitch + adjustments based on optical flow)
...
Removed optical flow from regular loiter for now until it's tested.
13 years ago
9c8122e061
converted auto land to use the mission planner version
...
Removed gate that looked for already set control_mode. Wasn't compatible with failsafe
13 years ago
98f9a5f237
Forced Faildafe throttle mode to throttle Auto
13 years ago
40ad164c8d
Clears Auto_land timer
13 years ago
df81a9459a
ACM: reset all I terms on gyro calibration
13 years ago
2e83e42764
Added precalc for wind compensation when entering Stabilze mode
13 years ago
ecb3241489
calc_wind_compensation called when exiting AP modes
...
Rate I terms reset in Acro Mode switch
Limit of 1 m set to alt hold
Reset circle angle to 0 by default
Land got land_complete var set to false by default
13 years ago
cdd5589498
I2c: default to 5ms timeout, and faster bus speed
...
we will slow down the speed when we get a failure
13 years ago
bbe6dea980
OptFlow - initial support for APM2 (there are still problems) including adding ability to set Chip Select pin.
...
Other unrelated changes are:
a) fixed typo in 'esitmate_velocity' to 'estimate_velocity'.
b) moved init_compass from system.pde to sensors.pde which seemed consistent with other sensors.
13 years ago
03a16c6e45
ACM: use new I2C library
13 years ago
73e6d5ee11
ACM: update for DataFlash changes
13 years ago
0dadbf932a
removed "Please run setup" loop from ArduCopter
...
Chris asked for this to be removed as it was really mucking up the
initial experience setting up ArduCopter via the planner
13 years ago
e5a3899b7f
added ability to enter Loiter with only optflow available
13 years ago
ad9c0533d8
ACM: run mavlink loop while erasing logs
13 years ago
1251e8105d
Added failsafe check
13 years ago
483bef35e5
IMU: update ACM and APM for flash_leds change in IMU init
13 years ago
07dba4eff7
desktop: fixed Wire.begin() build problem
13 years ago
a48c65b5b5
ArduCopter: update AP_Baro constructors & initializers
13 years ago
f3ad7f3af8
Wire and SPI Init: move to sketch system.pde from libraries
...
* Wire.begin removed from AP_Baro_BMP085::init()
* SPI.begin removed from AP_Baro_MS5611::init()
* SPI.begin removed from AP_InertialSensor_MPU6000::hardware_init()
* Both Wire.begin and SPI.begin added very early in init_ardupilot in
ArduCopter/system.pde and ArduPlane/system.pde
13 years ago
39fe9075d9
ArduCopter Init: different call to barometer.init based on CONFIG_BARO
...
* BMP085 has two arguments, second varying on apm1/apm2
* ms5611 has no arguments
13 years ago
2e200834e1
ArduCopter: Revert "Switched to Gyro only startup"
...
This reverts commit f932f0a9f6a29e9c3193622109298c657ed5a908.
I fixed this bug in 734185599cd9d6a487c675460c09895172e012b0.
It is no longer valid to call IMU::init_gyro() before IMU::init().
13 years ago
fe336fb749
ArduCopter - small fixes to fix HIL compile errors
13 years ago
67855b207d
Arducopter, RangeFinder - added SONAR_TYPE parameter and properly support the XL (default), LV and long distance XL (aka XLL) sonar types
13 years ago
648ab5f4ae
Switched to Gyro only startup
13 years ago
49806d93d9
Added Land FLight mode definition
13 years ago
0d8071a401
Added new gain and clamp value for DCM
13 years ago
aaac6212ab
MAVLink: use the configured system ID for ArduCopter
13 years ago
b92b4e9092
cleanup
13 years ago
b03de3095e
Add DataFlash.Init before doing a forced log erase on eeprom reset.
...
Add progress indication during log erase
13 years ago
df57380adc
Erasing Logs causing major havoc. Users getting infinite loop.
13 years ago
fb5302c50b
No longer resetting ch7 wp index with mode change, requires reboot
13 years ago
19c3c27ed0
Erasing Logs at new FW version detection
13 years ago
38c85c44ae
ArduCopter: rename purple to APM2
13 years ago
3a542b3ef3
USB-MUX: enable USB MUX switching for ArduCopter
13 years ago
338445e60c
ArduCopter-HIL: fixed HIL build
...
Logging isn't always enabled
13 years ago
1d50bb80fd
hil-sensors ArduCopter: fixes to make hil-sensors build work properly
...
* requires new stub libraries for InertialSensor and PeriodicProcess.
13 years ago
1e41b4b2b0
timer_scheduler doesn't exist in HIL_MODE_ATTITUDE
13 years ago
3072fdda85
adc.Init() needs timer_scheduler
13 years ago
3131ab16ef
remove BROKEN_SLIDER code
...
use the new CLI_SLIDER_ENABLED option and the "hit ENTER 3 times"
method
13 years ago
f1bad83d21
purple: fixed system init for purple sensor objects
13 years ago
4869ac3385
purple: use the new LED_ON/LED_OFF macros for LED level
...
this gets this right on both APM1 and purple for ArduCopter
13 years ago
89d2f0f849
mod barometer.Init() based on hardware
13 years ago
89e014c06a
Added alternate alt hold,
...
New ESC Calibration Routine
13 years ago
95b797d359
removed the init_esc - reworking the method to avoid the use of the CLI.
13 years ago
aef4db8263
Logging stabilization KP to hunt bug
13 years ago
8e1f311c36
s
...
shortened strings, logging defines updated
13 years ago
Jason Short
Randy Mackay
Andrew Tridgell
Pat Hickey
Doug Weibel
Jason Short
Pat Hickey