zr-v4

Commit Graph

Author	SHA1	Message	Date
ChristopherOlson	2d89bcaef6	Tools:TradHeli - update param files to lower gains for ACCZ_P, and Position Controller velocity request	7 years ago
Randy Mackay	31bfedafa2	Tools: add arduroller balance bot parameter defaults	7 years ago
ChristopherOlson	cbe68b4a91	Tools:TradHeli - update Copter3.6 setup params and add param files for QGC add new Copter3.5 to 3.6 upgrade params to set the PSC, LOIT and NAV controllers for New Loiter and new Position Controller	7 years ago
Matt	d0a613225f	Frame_Params: Update for Solo on AC36-RC7	7 years ago
Lucas De Marchi	604deaf4ba	Frame_params: remove safety mask from intel-aero-rtf Now we can build without it, so there's no need to set this param.	7 years ago
Peter Barker	0f50cf96ca	Tools: Frame_Params: correct for CH7 -> RC7 change	7 years ago
Randy Mackay	cc0b3705e9	Tools: default param file for Thunder Tiger Toyota Hilux	7 years ago
Lucas De Marchi	981a575aa2	Frame_params: rename some aerofc parameters Now that we don't panic() on unknown parameters, we can boot even with wrong parameters. This brings the default parameters of aerofc to be up to date. The following parameters were not removed and will be warned: WPNAV_LOIT_JERK WPNAV_LOIT_MAXA WPNAV_LOIT_MINA WPNAV_LOIT_SPEED There are no clear substitute for those, so they are staying until we know if they should be renamed/changed/removed.	7 years ago
Randy Mackay	8c485e1a9e	Tools: set ground effect comp in tradheli default parameters	7 years ago
Randy Mackay	3ecc0ea6c8	Tools: add hydrotek boat default parameters	7 years ago
Randy Mackay	f2ac48a33e	Tools: update holybro kospi1 default	7 years ago
Randy Mackay	268fac0fba	Tools: default params for Holybro Kospi1	7 years ago
ChristopherOlson	087fd4effc	Tools: Add default tuning params for single-rotor TradHeli Tunes PSC, LOIT, NAV, ATC specific to Copter 3.6 and New Loiter	7 years ago
Randy Mackay	94a1a025f1	Tools: update AION R1 default params	7 years ago
Randy Mackay	7f7a588002	Tools: add accel and turn-rate max and increase steering angle P these parameters were added to Rover-3.3	7 years ago
Randy Mackay	1b26f8527a	Tools: remove RC params from eLAB445 param file	7 years ago
Randy Mackay	741d641876	Tools: remove unused real-flight default param files	7 years ago
Randy Mackay	781a0b457b	Tools: update WLToys v383 roll and pitch rate gains	7 years ago
Randy Mackay	2f26b3faa1	Copter: update HeliQuad param file fix servo range and reverse params	7 years ago
Randy Mackay	80e5742d77	Tools: correct HeliQuad param file	7 years ago
Jacob Walser	9897ff60de	Frame_params: Add BlueROV2 Heavy param file	7 years ago
nicknunno	72b698bf96	Tools: update AION default param Add servo-function reversed, compass offset maximum	7 years ago
Andrew Tridgell	330fa815e8	Frams_params: updates for new pos controller for skyviper	7 years ago
Andrew Tridgell	238db04187	Frame_Params: set TMODE_ENABLE=2 for the F412	7 years ago
Andrew Tridgell	ca12d99430	Frame_Params: fixed orientation on F412	7 years ago
Andrew Tridgell	76703a80c4	Frame_params: disable unpopulated serial ports	7 years ago
Andrew Tridgell	3b5bb3cae2	Frame_params: default to CC2500 radio for F412	7 years ago
Andrew Tridgell	5eb29f94ce	Frame_Params: update config for Skyviper-2450	7 years ago
Andrew Tridgell	674bf12f6e	Frame_params: fixed ordering of F412 motors	7 years ago
Andrew Tridgell	ebeda12953	Frame_params: added defaults for SkyViper-F412	7 years ago
Andrew Tridgell	360a8d99bf	Frame_params: bring 2450 params in line with release	7 years ago
Andrew Tridgell	40ba4645e6	Frame_params: added SkyViper 2450GPS params for ChibiOS	7 years ago
Matt	9f1c96bb09	Tools: Solo AC 3.6 parameters Parameters for a 3DR Solo running ArduCopter 3.6, since there are some differences from 3.5.	7 years ago
Matt	a766551a48	Tools: Solo AC 3.5 disable log prearm check There are still intermitant false-positive logging failure happening in ArduCopter. This disables the logging arming check for the time being. This was set back to 1 a few months ago thinking the issue was fixed. But it turns out it is not.	7 years ago
Randy Mackay	af7bb7cbd7	Tools: update eLAB VEK default parameters Add default steering feedforward value	7 years ago
Randy Mackay	7b0b9f10de	Tools: AION R1 default params use steering feed-forward Also add wheel encoder defaults	7 years ago
Randy Mackay	368698d173	Tools: AION R1 default remove compass-external compass-external settings should normally not need to be set	7 years ago
NickNunno	94eceddf69	Tools: update AION R1 default parameters Added default presets to match documentation & hardware setup.	7 years ago
Randy Mackay	dcb37a2454	Tools: default param file for AION R1 rover	7 years ago
Matt	41f2e8869e	FRAME_PARAMS: Solo mag and arming param update Updates the arming check to all Updates the required compass parameters Updates the compass_typemask to disable the LIS3MDL	7 years ago
murata	0934bdb5dc	Tools: remove default values from eLAB 445 params	7 years ago
Jacob Walser	83bb1e7f4a	Frame_params: (BlueROV2/Sub-3.5.2) update tilt servo reversal	7 years ago
Jacob Walser	305f203dd3	Frame_params: (BlueRov2/Sub-3.5.2) Reset to defaults	7 years ago
Jacob Walser	67eefe3d6a	Frame_params: (BlueRov2/Sub-3.5.2) Use integers for APInts	7 years ago
Jacob Walser	acb65b99ac	Frame_params: add file for BlueROV2 on Sub 3.5.2	7 years ago
TsuyoshiKawamura	3467be6695	Tools: update eLAB-445 parameter file	7 years ago
Andrew Tridgell	3a78255e54	Frame_Params: added WLToys V383 parameters for HeliQuad frame	7 years ago
Lucas De Marchi	015242c89b	Tools: add params for Aero Compute Board These are the parameter for Aero Compute Board to fly Intel Aero RTF without the flight controller, using just the internal sensors on the Linux side.	7 years ago
Randy Mackay	ebea292d63	Tools: add frame params for eLAB 470 quad	8 years ago
Jacob Walser	19086e34f0	Frame_params: update BlueROV2 defaults for 3.5.1	8 years ago

1 2 3 4

195 Commits (4366bae96d53906023c3d18f84f168651859bf59)