Randy Mackay
3e399fd830
Copter: remove unused parameters
11 years ago
Randy Mackay
3b9ae02966
Copter: add Circle parameter
11 years ago
Randy Mackay
784f7385b5
Copter: add attitude and pos control params
11 years ago
Randy Mackay
7b9a48107e
Copter: move angle_max parameter to AP_Vehicle
11 years ago
Randy Mackay
2219f21744
Copter: add RC_FEEL_RP parameter
...
Values from 0 ~ 100 control amount of filtering on roll and pitch input.
100 = no filter so crisp feel, 0 = a lot of filtering so very sluggish
response
11 years ago
Randy Mackay
5d929351ca
Copter: removed unused servo3, servo4 from coax
11 years ago
Dneault
f48e106271
Copter: add coax heli support
...
Motors should be attached to RCOutputs 1 and 2, Flaps should be connected
to RC outputs 3 and 4
11 years ago
Andrew Tridgell
50a90a1043
Copter: enable AP_BoardConfig
11 years ago
Lukasz
cb17a5bdb6
Copter: Add RSSI_RANGE parameter
...
Added ability to rescale rssi input voltage. Useful for receivers like
FrSky which have 3.3V output.
11 years ago
ctech4285
2b5d8aa5b7
Copter: integrate EPM library
11 years ago
Andrew Tridgell
28d98414e7
Copter: fixed some build warnings
11 years ago
Randy Mackay
59cea4b88c
Copter: remove CopterLED from main code
11 years ago
Andrew Tridgell
9c812d5028
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
11 years ago
Andrew Tridgell
a49710f20e
Copter: added uartD support
...
this also brings GCS_Mavlink.pde closer to the plane implementation
11 years ago
Randy Mackay
ed9f369492
Copter: shorten g.arming_check_enabled variable
...
g.arming_check_enabled shortened to g.arming_check
11 years ago
Randy Mackay
c9c803ffd4
TradHeli: move STAB_COL_MIN to main parameter list
11 years ago
Randy Mackay
159d6320bf
Copter: move SINGLE parameters to start at 75
11 years ago
ssq870424
07d3f2a3c5
Copter: add support for singlecopter airframe
...
this is the newest singlecopter airframe programme.
This kind of aerial vehicles include Honeywell T-hawk and Goldeneye.
11 years ago
Jason Short
c3aa56459a
Copter: remove unused Toy param
11 years ago
Randy Mackay
97770ae352
Copter: rc10, rc11 available even without MOUNT
11 years ago
Randy Mackay
8386b658e9
Copter: add ANGLE_RATE_MAX param
...
Limits the maximum rotation rate requested by the angle controller which
is used in stabilize, loiter, rtl and auto flight modes
11 years ago
Randy Mackay
8de6c34252
Copter: comments update for GPS_HDOP_GOOD parameter
11 years ago
Randy Mackay
dab4f032f9
Copter: integrate BattMonitor
12 years ago
Randy Mackay
6c5294f89e
Copter: integrate GPS_Glitch parameters
12 years ago
Randy Mackay
d8eb7fb82f
Copter: remove x100 from IMAX definitions
12 years ago
Randy Mackay
d000967a76
Copter: pre-arm check for gps hdop < 2
12 years ago
Randy Mackay
6969ab573d
Copter: configurable max lean angle
...
ANGLE_MAX parameter allows limiting the roll and pitch angles during
manual and auto flight modes to anywhere from 10 to 80 degrees
12 years ago
Randy Mackay
74fb500efe
Copter: integrate AC_Sprayer
12 years ago
Randy Mackay
49dbdce89c
Copter: split ACRO_P into ACRO_RP_P and ACRO_YAW_P
12 years ago
Randy Mackay
82082e044c
Copter: remove ACRO's axis enabled parameter
...
Acro is now body frame (with earth frame leveling) while Sport is earth
frame acro
12 years ago
Randy Mackay
21e523b9ac
Copter: Acro trainer separated into limited and leveled
12 years ago
Randy Mackay
aefb38e486
Copter: remove param to disable accel based throttle controller
12 years ago
Randy Mackay
404cd5f3da
Copter: rename g.pid_throttle to g.pid_throttle_rate
...
Small code clean-up to make throttle rate controller's pid more obvious
12 years ago
Andrew Tridgell
23eade8f74
Copter: enable RELAY_* parameters
12 years ago
Randy Mackay
213eaa8db6
Copter: integrate draft RCMapper
12 years ago
Randy Mackay
5ee68db6f0
TradHeli: add parameter descriptions
...
small formatting changes too
12 years ago
Randy Mackay
bd44c2f73d
Copter: all pre-arm checks to be disabled
...
set ARMING_CHECK parameter to zero to disable
12 years ago
Randy Mackay
9fdab5e8fe
Copter: remove unused AUTO_SLEW_RATE parameter
12 years ago
Randy Mackay
38239c652a
Copter: ch8 aux switch
...
Ch8 can be used as an aux switch like ch7. Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
12 years ago
Randy Mackay
bab9fa25e5
Copter: add GCS failsafe
12 years ago
Randy Mackay
c232d7af4b
Copter: correct fence parameter
12 years ago
Randy Mackay
58d1da2d80
Copter: integrate AC_Fence in place of limits
...
Lesser functionality than limits but saves more than 150 bytes and it
works
12 years ago
Andrew Tridgell
300a8d2bbc
Copter: support all 12 channels on PX4
...
last 4 channels are on the FMU pins
12 years ago
Randy Mackay
745df9b13c
Copter: add SONAR_GAIN to tune reaction to sonar
...
Some users report the response to sonar is too violent, this allows that
reaction to be reduced
12 years ago
Randy Mackay
37abfdc65a
Copter: make CIRCLE_RATE a tunable parameter
...
Also bug fix to check of how many time it has rotated during a loiter
turns mission command
12 years ago
Randy Mackay
0fc9c8739e
Copter: add WP_YAW_BEHAVE parameter
...
Allows user to control whether nose points towards next waypoint and/or
home when RTLing.
Replaces YAW_OVR_BEHAVE which had a very similar purpose. Almost nobody
ever knew about or used this parameter.
12 years ago
Randy Mackay
f5955d8915
Copter: auto climb and descent params removed
...
These params now reside in the AC_WPNav library
12 years ago
Randy Mackay
629d23b7e2
Copter: remove WP_SPEED and WP_RADIUS parameters
...
AC_WPNav library has equivalent params with very similar names
12 years ago
Randy Mackay
b58c26bcd5
Copter: remove pid_nav_lat, pid_nav_lon
12 years ago
Randy Mackay
2db8365c90
Copter: add AC_WPNav to parameters list
12 years ago