# avoid a timeout race condition where ArduPilot re-requests a
# fence point before we receive and respond to the first one.
# Since ArduPilot has a 1s timeout on re-requesting, This only
# requires a round-trip delay of 1/speedup seconds to trigger
# - and that has been seen in practise on Travis
AT-0417.0: Sending item with seq=0
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Got (MISSION_REQUEST {target_system : 243, target_component : 250, seq : 0, mission_type : 1})
AT-0417.2: Exception caught: Traceback (most recent call last):
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/common.py", line 3950, in run_one_test
test_function()
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4216, in test_poly_fence
self.test_fence_upload_timeouts()
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4057, in test_fence_upload_timeouts
target_component=target_component)
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 4010, in test_fence_upload_timeouts_2
self.expect_request_for_item(item)
File "/home/travis/build/ArduPilot/ardupilot/Tools/autotest/rover.py", line 3958, in expect_request_for_item
raise NotAchievedException("Expected request for seq=%u" % item.seq)
NotAchievedException: Expected request for seq=1
The "AT" timestamps there are wallclock time. Since speedup for Rover
is 8 by default, that could be as much as 1.6 seconds meaning a
re-request from ArduPilot would be legitimate.
I've added some debug, too - we now emit "Sending item with seq=1"
between those two "Got" lines. That should make the problem clearer -
we've received a re-request rather than a request for the item after the
one we've already sent.
On the assumption that ArduPilot processes mavlink packets
synchronously (or at least in order), after we have run a timesync
roundtrip we can reasonably expect any mavlink command we have sent
prior to the roundtrip to have been processed, and we should be able to
see the results in the mavlink stream.
There's a race condition with MAVProxy; it's fetching parameters here
and seems to ignore our requests.
Also correct named parameter from retry to attempts
Peter Barker
Pierre Kancir
Rishabh
Willian Galvani
Mark Whitehorn
bugobliterator
bolu3
murata
Samuel Tabor
Andrew Tridgell
Andy Piper
Henry Wurzburg