71f6287388
Plane: fixed spelling
12 years ago
dcbe144c7e
Plane: prepare for release of 2.71
12 years ago
e58f49aeaf
Plane: copy rudder out in TRAINING mode
...
we were doing rudder mixing in training mode, which shouldn't be done
12 years ago
993154ea59
Plane: expand the VTAIL_OUTPUT docs for APM1
12 years ago
bd2b9fbe9d
Plane: simplify the VTail mixer to be more like a hardware mixer
...
this should make it easier to trim the vtail
12 years ago
17cbcd1bf6
Plane: fixed failsafe with VTAIL_OUTPUT
12 years ago
406921faf1
Plane: added VTAIL_OUTPUT option
...
this allows for software vtail mixing
12 years ago
21a51c8333
Plane: update GCS_Mavlink parameter documentation
12 years ago
a69c9ff674
Plane: added logging of DIGICAM events
12 years ago
ddfcafe80f
Plane: fixed DIGICAM camera trigger
12 years ago
683a2919d1
Plane: prevent stick mixing when throttle is below failsafe threshold
...
this fixes issue #40
12 years ago
c5e2cfcc3e
Plane: preparing for 2.71-beta
12 years ago
2506c216dd
Plane: added a second type of stick mixing
...
this changes STICK_MIXING from a boolean to a tri-state. With
STICK_MIXING=1 it now uses FBW style mixing. With STICK_MIXING=2 it
uses the old style of direct stick mixing.
12 years ago
5d54215221
Plane: use int16_t() not int() to ensure simulator matches AVR
12 years ago
e390726bdd
Plane: prevent overflow on large PID gains
...
this uses get_pid_4500() to prevent overflow of servo_out on large PID gains
12 years ago
624ebced38
Plane: document INVERTEDFLT_CH
12 years ago
dfb14d760b
Plane: added HIL_SERVOS option
...
this allows for real servo output in HIL
12 years ago
6cc4aadc06
Plane: report compass health in SYS_STATUS
12 years ago
a165f0d138
Plane: removed old angle wrap code
12 years ago
7db7d7db77
Plane: change FBWB altitude control algorithm
...
this makes FBWB much less sensitive to airframe tuning. When the
elevator stick first goes neutral it locks in the current altitude as
the target altitude. When the elevator stick is off neutral, it moves
the target altitude in proportion to the elevator, at a rate goverened
by the new FBWB_CLIMB_RATE parameter
This prevents the aircraft from slowly drifting in altitude in FBWB,
and gives a more intuitive control mechanism for altitude.
Thanks to Chris Miser from Falcon UAV for help in designing this
change
12 years ago
fcde3ceb24
Plane: also avoid rudder on takeoff with TOFF_HEAD_HOLD==0
12 years ago
a49fe272ad
Plane: replace gps fix with status
...
Required to ensure 3d fix is used for initialising home
12 years ago
c2055557f5
Plane: add support for GPS fix type 2D
12 years ago
f077f54e6a
Plane: added TKOFF_HEAD_HOLD option
...
this allows control over whether ArduPlane tries to hold heading
during auto takeoff. For hand launches it can be better to hold the
wings level and not attempt to hold heading during takeoff to prevent
the possibility of a stall during the climb out.
Thanks to Chris Miser from Falcon UAV for the feedback that led to
this option.
12 years ago
1d983b3f2e
Plane: fixed X accel triggering of auto
12 years ago
1a36c3684b
Plane: fixed GPS test (detection of uBlox needs 10Hz poll)
12 years ago
6948e0c473
Plane: only enter CLI is link is idle when 3 enters are hit
...
this will prevent binary contents of RADIO packets being interpreted
as CLI enter line-feeds
12 years ago
0e37ae4400
Plane: change CLI timeout to 20s
12 years ago
c9576e59f9
Add set command to setup menu (and changed show command), same as for ArduCopter. Not included when building for 1280.
12 years ago
36834e77b5
Copter: remove support for CLI Slider
12 years ago
36ff950b12
Plane: fixed MAVLink target IDs in fence point message
...
thanks to Kevin Hester for finding this
12 years ago
0a385cc0ff
Plane: added TKOFF_THR_MINACC option
...
this is used for triggering auto takeoff with a hand launched plane
12 years ago
9697ff5d6d
Plane: Added extra parameter to specify at what speed in auto-takeoff throttle should engage
...
This adds TKOFF_THR_MINSPD in m/s
12 years ago
87c6545ac6
Plane: don't trigger GCS failsafe if GCS never connected
...
The we have never received a heartbeat message from the GCS then don't
use the lack of heartbeat to trigger a failsafe event
12 years ago
e93888dee9
Plane: make a throttle_cruise of 0 mean always zero throttle
...
this can be used for parachute landing missions
Thanks to Chris Miser for the suggestion
12 years ago
e0e22b63a7
Plane: removed INPUT_VOLTS parameter
...
no longer needed
12 years ago
2331c84423
Plane: use voltage_average() to not depend on INPUT_VOLTS
12 years ago
de55e19eec
Plane: updates for new dataflash API
12 years ago
b3213b7113
Plane: fixes for new DataFlash API
12 years ago
5f4c5f8201
Plane: update SERIAL0_BAUD parameter description
12 years ago
139acc0530
Plane: ignore control mode changes when in throttle failsafe
...
this prevents the receiver causing a temporary mode change
12 years ago
1ebaa14a99
Plane: prepare for 2.70 release
12 years ago
0a0b51cc63
Plane: reset AHRS trim after a level operation
12 years ago
24826c0c74
Plane: default the stream rates to 1Hz
12 years ago
1007f2ef07
Plane: fixed a bug with setting stream rates
...
this is what caused the "no sensors" problem in the 2.69 release
12 years ago
9c984b18db
Plane: integrate automatic roll and pitch trims
12 years ago
c989099665
Plane: enable PX4IO dual telemetry devices
12 years ago
e8806b14ec
Plane: enable MAV_CMD_DO_DIGICAM_CONTROL
12 years ago
8c0f065ee4
Plane: fixed an integer multiply error that caused poor altitude on landing
...
the control of altitude between waypoints was broken due to an integer
overflow
12 years ago
2f677acf3b
Plane: update firmware version to 2.69
12 years ago
Andrew Tridgell
Randy Mackay
John Stäck
Michael Warren