/ardupilot/ArduPlane/quadplane.cpp:773:107: warning: implicit conversion from 'float' to 'double' when passing argument to function [-Wdouble-promotion]
// @Description: When enabled, after an autoland and auto-disarm via LAND_DISARMDELAY happens then set all servos to neutral. This is helpful when an aircraft has a rough landing upside down or a crazy angle causing the servos to strain.
- replace tabs with spaces
- remove C-style void from function arguments
- use pragma once
- fix pointer alignement
- remove unused header: AP_Airspeed_I2C_PX4 - we actually use
AP_Airspeed_PX4
This allows us to re-use SPIDevice from SPIDeviceDriver (the
to-become-SPIDeviceProperties) while the drivers are
converted. We create a fake device by calling the temporary
SPIDeviceManager::get_device() method passing the descriptor. The
transfer and assert logic is still using the old code.
Now we can interoperate SPIDeviceDriver with the ones based in
SPIDevice since they are going to use the same semaphore and bus.
The way this code is structured is a little bit different from the
SPIDriver implementation:
- We only open the bus once, no matter how many devices we have in it
- There's a single transfer() method which uses half-duplex mode
instead of full duplex. The reason is that for all cases in the
codebase we are using half-duplex transfers using the full-duplex
API, i.e. a single SPI msg with both tx and rx buffers. This is
cumbersome because the buffers need to be of the same size and the
receive buffer using an offset of the same length as the actux data
being written. This means the high level APIs need to copy buffers
around.
If later we have uses for a real full duplex case it's just a matter
of adding another transfer_fullduplex() method or something like
this.
- The methods are implemented in the SPIDevice class instead of having
proxy methods to SPIDeviceManager as is the case of SPIDriver
Also from now on we refer to the SPIDriver objects as "descriptors"
because they have the parameters of each device in the
SPIDeviceManager::devices[] table. When SPIDeviceDriver is completely
replaced we can rename them to SPIDeviceProperties.
Save in the manager the number of devices so it can be used in other
places like the SPIDevice implementation. This is a temporary storage
while we migrate to SPIDevice.
While at it use protected rather than private.
This allows us to re-use I2CDevice from I2CDriver while the drivers are
converted. We create a fake device with addr = 0 for each I2CDriver but
we only use the register/unregister logic. The transfer logic still uses
the methods from I2CDriver in order to use the right address.
Now we can interoperate I2CDevice drivers with the ones base in
I2CDriver since they are going to use the same semaphore and bus.
The I2CDriver constructors were changed to re-use the logic in I2CDevice
(it uses a number rather than an string) and the semaphore doesn't live
outside anymore, its embedded in the fake I2CDevice, as well as the
bus's file descritor.
This is a similar function to what we have in I2CDriver, but it can
receive a nullptr to recv or send. It will create 2 i2c_msg structs to
send and receive data to/from the I2C slave.
These are very similar to their counterparts in I2CDriver. The changes
were:
- Don't use fixed buffer with PATH_MAX length: allocate the string
- Change the interface to use std::vector so we can simplify the
implementation
This is very similar to std::unique_ptr, but doesn't require including
the <memory> header which pulls lots of c++ headers and cause problems
with nuttx headers. It's header-only. It contains an explanation on what
it solves, how to use and unit tests.
Add a cstddef header to allow using std::nullptr_t with those toolchains
that don't provide it. The idea is to make these platforms to use our
wrapper header (see https://gcc.gnu.org/onlinedocs/cpp/Wrapper-Headers.html)
and then we add the missing bits to the header.
Cast to the original type to use get function.
Still a hack but better than casting a pointer to an object which
memory mapping we are not supposed to know
Tom Pittenger
Lucas De Marchi
Andrew Tridgell
Julien Beraud
Peter Barker