0fe38da522
GCS_MAVLink: rename battery reset function
4 years ago
115e895c82
GCS_MAVLink: return MAV_RESULT_FAILED from do_aux_function if invalid function
4 years ago
2d61ded1f3
GCS_MAVLink: add option to execute auxillary functions via mavlink
4 years ago
b8f9c3b9c0
GCS_MAVLink: use of AP_Proximity checks HAL_PROXIMITY_ENABLED
4 years ago
5123b05b2b
GCS_MAVLink: add support for ATTITUDE_QUATERNION
4 years ago
f028747399
GCS_MAVLink: Remove todo since plane now supports MAV Protocol Capability Mission Fence
4 years ago
c2abf27d78
GCS_MAVLink: Add reporting of fence floor breaches to GCS_MAVLink
...
GCS_MAVLink: Add disabling of fence floor only, per mavlink spec
GCS_MAVLink: Cannot enable a fence if the fence is not present
4 years ago
e3de88d1d4
GCS_MAVLink: handle MAV_CMD_DO_SET_MISSION_CURRENT
4 years ago
7480a2a00b
GCS_MAVLink: correct output of AHRS2 mavlink message
...
The || here was causing short-circuiting
4 years ago
9932aa99f7
GCS_MAVlink: return identical seq in MISSION_CURRENT if possible after set
...
// because MISSION_SET_CURRENT is a message not a command,
// there is not ACK associated with us successfully changing
// our waypoint. Some GCSs use the fact we return exactly the
// same mission sequence number in this packet as an ACK - so
// if they send a MISSION_SET_CURRENT with seq number of 4
// then they expect to receive a MISSION_CURRENT message with
// exactly that sequence number in it, even if ArduPilot never
// actually holds that as a sequence number (e.g. packet.seq==0).
4 years ago
cfe9dc32d1
GCS_MAVLink: only send distance_sensor messages if valid data seen
...
In the case you only have a forward-pointing LIDAR we'd send messages
for each of the other orientations from proximty's horizontal-distances
array, chewing up bandwidth and processing time.
4 years ago
c5e62eb6e4
GCS_MAVLink: schedule current waypoint rather than immediate send
...
This message may not fit in our outgoing buffer
4 years ago
ba2adac869
GCS_MAVLink: Simplify boolean expression
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
4 years ago
1afa0a7ff2
GCS_MAVLink: remove unused member
...
and a bogus comment
4 years ago
eefcc92f24
GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command
4 years ago
c1a831bbf4
GCS_MAVLink: sensor flags, only mark AHRS as enabled once initialised
4 years ago
6d1511f3eb
GCS_MAVLink: added method to force save calibration
...
useful after reloading parameters
4 years ago
bb15c18cc3
GCS_MAVLink: send message when MAVFTP init fails
4 years ago
698f967b63
GCS_MAVLink: Notify the maximum number of missions
...
Update libraries/GCS_MAVLink/MissionItemProtocol.cpp
Co-authored-by: WickedShell <Wicked.Shell.Scripts@gmail.com>
GCS_MAVLink: Notify the maximum number of missions
4 years ago
e8e41c512e
GCS_MAVLINK: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
4 years ago
a5fafe57d8
GCS_MAVLink: Add support for OBSTACLE_DISTANCE_3D
4 years ago
1716fcf995
GCS_MAVLink: fixed valgrind errors with AP_Param::ParamToken
4 years ago
e32ca819fc
GCS_MAVLink: mark results as unused
4 years ago
e58d2ecf2f
GCS_MAVLink: add mavlink command option to create a 250ms long loop
4 years ago
1c3b7d5ecd
GCS_MAVLink: added support for passthrough telemetry over crossfire
4 years ago
30a4747898
GCS_MAVLink: send sim_state msg
4 years ago
ed8d86e5e6
GCS_MAVLINK: support deliberate parameter corruption
4 years ago
3d577d94e8
GCS_MAVLink: add do_disarm_checks boolean to disarm call
...
this creates symmetry between arming and disarming, at least as far as
the top-level arm() and disarm() calls are concerned.
4 years ago
0052500d67
GCS_MAVLink: split out a handle_command_component_arm_disarm
4 years ago
a2192eda5e
GCS_MAVLink: use RADIO_STATUS message txbuf field
...
this avoids overrunning radio buffer in queued_param_send()
4 years ago
882d9c4e23
GCS_MAVLink: adjust stack sizes
4 years ago
d24e569b20
GCS_MAVLink: add option to panic the autopilot
4 years ago
b8827e6486
GCS_MAVLink: allow control to be return to radio for higher-numbered RC_CHANNELS_OVERRIDE
4 years ago
6f4bbd3f57
GCS_MAVLink: for high RC_CHANNELS_OVERRIDE channels zero means ignore the field
4 years ago
e6c5382a28
GCS_MAVLINK: fixed FPE in DO_SET_ROI
...
this prevents a floating point exception when MissionPlanner sends an
invalid DO_SET_ROI
See https://github.com/ArduPilot/MissionPlanner/issues/2528
4 years ago
d76825feeb
GCS_MAVLink: adapt to upstream changes in the distance_sensor mavlink message
4 years ago
6df118e7b4
GCS_MAVLink: convert to using hal.serial() instead of hal.uartX
4 years ago
1d0e7d2974
GCS_MAVLink: Added cells 11...14 voltage information (13 and 14 are 0 for now)
4 years ago
5e3bf0a703
GCS_MAVLink: implement BRD_OPTIONS bit for setting of internal parameters
4 years ago
8b5ff1a6de
GCS_MAVLink: enable GCS_SEND_TEXT() to send as CAN LogMessage messages
4 years ago
88895f9b13
GCS_MAVLink: stop using one backend's signing structure for all backends
4 years ago
caf1ad28d5
GCS_Common: AP_Generator_Richenpower is now AP_Generator
4 years ago
f0c22244a5
GCS_MAVLink: correct response codes when mode change fails
...
Was "UNSUPPORTED", which is supposed to mean, "Command is not supported"
Now is either "DENIED" (Command is invalid (is supported but has invalid
parameters)) or "FAILED" (Command is valid, but execution has failed.)
We should probably returned DENIED if we try to change to a mode which
doesn't exist, but that would require another callback on AP_Vehicle.
It would also lead to questions around what a valid mode is - so
QSTABILIZE if quadplane is disabled in Plane, for example.
4 years ago
6eca18c08b
GCS_MAVLink: add Board option to disable MAVftp in low mem bds/apps
4 years ago
9c74474196
GCS_MAVLink: setup baudrates for passthru serial ports
4 years ago
41943f5fda
GCS_MAVLink: correct use of uninitialised value in Rally upload
4 years ago
4d1c660ebc
GCS_MAVLink: enable OSD parameters on parameter enablement
4 years ago
147df12eb8
GCS_MAVLink: allow replay to use GCS_Dummy
4 years ago
e1126d4fd6
GCS_MAVLink: use micro64 instead of micros for time_usec
4 years ago
73594cb19b
GCS_MAVLink: send airspeed temp in scaled_pressure
4 years ago
Iampete1
Peter Barker
Randy Mackay
James O'Shannessy
Patrick José Pereira
Andrew Tridgell
Mark Whitehorn
murata
Rishabh
yaapu
Pierre Kancir
Brad Bosch
Dr.-Ing. Amilcar do Carmo Lucas
Gone4Dirt
Hwurzburg
Andy Piper
Tatsuya Yamaguchi