6035 Commits (d5364571a8a4de4c68bb320790cfce0dabd62ad7)
 

Author SHA1 Message Date
John Arne Birkeland d5364571a8 ArduPPM V2.3.13 12 years ago
Jason Short 0419dc8dfd ACM: Simplified control mode code 12 years ago
Jason Short 19ae5c30eb ACM : Formatting 12 years ago
Michael Oborne dda74afa21 Mission Planner 1.2.27 12 years ago
Craig@3DR 2586c7a32a Updated the MediaTek configuration 12 years ago
rmackay9 52177c63f7 ArduCopter: only attempt to change settings of optical flow sensor if it has been successfully initialised 12 years ago
rmackay9 af77425636 ArduCopter: fix Failed to Init Optflow message at startup 12 years ago
rmackay9 2f748f8382 ArduCopter: renamed BATT_FAILSAFE to FS_BATT_ENABLE 12 years ago
rmackay9 d31efebd44 ArduCopter: rename throttle failsafe parameters. 12 years ago
rmackay9 24317e721b AC_PID, AP_AHRS: added descriptions to some parameters 12 years ago
rmackay9 2f1b2b70e6 ArduCopter: added ACRO_TRAINER parameter to allow enabling/disabling the acro training function which will bring the roll back to within +- 45 degrees 12 years ago
rmackay9 dadad8677e ArduCopter: added descriptions for most parameters that did not have them 12 years ago
rmackay9 a38db6744f AP_Motors: add comments for parameters 12 years ago
rmackay9 f522ef078e ArduCopter: remove unused functions do_target_yaw, do_loiter_at_location, get_altitude_error and clear_new_altitude 12 years ago
rmackay9 047f848cc7 ArduCopter: remove ThirdOrderCompFilter from list of includes 12 years ago
rmackay9 6cf94e20e7 AP_InertialNav_test: small change to #include in example sketch 12 years ago
rmackay9 395eb25041 ThirdOrderCompFilter: delete because now combined with AP_InertialNav library 12 years ago
rmackay9 154e3c33f7 ArduCopter, AP_InertialNav: consolidated ThirdOrderComplementaryFilter into AP_InertialNav to save about 200bytes of RAM 12 years ago
rmackay9 a84d9110bd AP_Buffer: add size 5 float fifo buffer to predeclared types 12 years ago
rmackay9 cfe2507c0b ArduCopter: reduce Rate Roll/Pitch P to 0.150 (was 0.175) and increase I to 0.1 (was 0.01) 12 years ago
rmackay9 56ceb230cb ArduCopter: add YAW_OVR_BEHAVE to allow control of when autopilot takes back control of yaw after pilot overrides it during a mission 12 years ago
rmackay9 0f7bb79d89 ArduCopter: add comments to tuning parameters. 12 years ago
rmackay9 49619b15dd RC_Channel: move RC_CHANNEL_ANGLE, RANGE, ANGLE_RAW type definitions to .h file so they can be used by the main sketch 12 years ago
rmackay9 9a05d3bd36 ArduCopter: add comments at the top of many navigation functions 12 years ago
rmackay9 8c2423f618 ArduCopter: code clean-up. Changed update_nav_wp to use a switch statement and relocated to navigation.pde 12 years ago
rmackay9 b36eb406d4 ArduCopter: allow alt hold to be engaged with alt < 1m because sometimes we get baro drift. 12 years ago
rmackay9 b4e5176e2a ArduCopter, AP_InertialSensor: restore mpu6k sample rate to 200hz but keep default filtering at 42hz. 12 years ago
Robert Lefebvre aa4d4f8c24 ACM: Adding Pre-Compiler Define for Stabilize Throttle Mode. 12 years ago
Robert Lefebvre 0eb57bf93d ACM: TradHeli 12 years ago
Robert Lefebvre 1b97a92098 ACM: Code Cleanup 12 years ago
rmackay9 f98a807d36 ArduCopter: remove debug related to yaw mode used for alt hold 12 years ago
rmackay9 9dd978576b ArduCopter: auto yaw changes to allow pilot override of yaw during missions 12 years ago
rmackay9 85c8bdce15 ArduCopter: removed unused and out-of-date #defines from APM_Config.h 12 years ago
Michael Oborne 9c836ab037 Mission Planner 1.2.26 12 years ago
rmackay9 68ca123224 ArduCopter: remove some unused #defines 12 years ago
rmackay9 99b32a39c4 ArduCopter: InertialNav time constant CH6 tuning changed to only update enabled axis 12 years ago
rmackay9 cca9f9dbce ArduCopter: do_set_servo fix to resolve -1 being assigned to uint8_t 12 years ago
rmackay9 35f94a6f71 AP_InertialNav: increase Z axis default time constant to 3.0 (was 1.5) 12 years ago
rmackay9 3a90fc77f9 ArduCopter: add dataflash logging of camera events 12 years ago
rmackay9 d74cf54b5d ArduCopter: allow triggering of camera from a mission 12 years ago
rmackay9 d3de77f74c ArduCopter: fix do_set_servo so that it works again 12 years ago
rmackay9 653535b9a1 ArduCopter: added CH7 option to trigger camera 12 years ago
rmackay9 d11ee04888 AP_Camera: add three new parameters DURATION, SERVO_ON and SERVO_OFF to allow better shutter control when using servo. 12 years ago
rmackay9 eac26b2313 RC_Channel_aux: immediately send output to servos when set_radio, set_radio_to_min, set_radio_to_max, set_radio_to_trim or set_servo_out functions are called. 12 years ago
rmackay9 4ca27defb3 ArduCopter: update comments related to CH7 switch options 12 years ago
rmackay9 75401756f2 ArduCopter: maintain loiter control even below 1m while landing 12 years ago
rmackay9 2dd4694eef ArduCopter: adjusted pid_throttle_accel dt to 0.01 (100hz) 12 years ago
rmackay9 269e02ee93 ArduCopter: bug fix - initialise inertial nav 12 years ago
rmackay9 8d682b9812 ArduCopter: disable INERTIAL_NAV_XY by default 12 years ago
rmackay9 39d524212f ArduCopter: allow accel based throttle controller to be enabled/disabled with the new THR_ACC_ENABLE parameter. 12 years ago