This commit changes the way libraries headers are included in source files:
- If the header is in the same directory the source belongs to, so the
notation '#include ""' is used with the path relative to the directory
containing the source.
- If the header is outside the directory containing the source, then we use
the notation '#include <>' with the path relative to libraries folder.
Some of the advantages of such approach:
- Only one search path for libraries headers.
- OSs like Windows may have a better lookup time.
Now we have the initialization code split in 2 parts:
1) Making sure the MPU9250 chip is alive and working: this is now in a
static function that may be called by other drivers that use MPU9250 as
backend.
2) The configuration of gyro and accel. Once the first part is completed
successfully the AP_InertialSensor_MPU9250 finishes the configuration of
the sensors it uses.
The only change in behavior here is that before we would try 25 time (5x
inside _hardware_init time 5x inside _init_sensor() that calls the first
function) to "boot the chip" and now we are doing "only" 5.
Add static methods to do the SPI transactions and provide the wrapper
methods when we have an instance of the object. This is useful so these
methods can be called from other contexts when the AP_InertialSensor
hasn't been initialized yet.
The previous implementation made some boards apply two rotations to suit
their default orientation. That was happening because there was an
unconditional rotation being done (commented as "rotate for bbone
default").
This commit makes that unconditional rotation as a default rotation
instead and adjusts the former additional rotations to be single
rotations.
when running off a 1kHz timer and reading at 1kHz it is better to
double sample than it is to skip a sample, as skipping samples will
throw the filter off, whereas a double sample will have minimal effect
this changes the sampling to 200Hz regardless of requested rate, and
it is downsampled inside num_samples_available() using a shift. This
gives better noise resistance in ArduPlane.
This patch also makes it possible to update the filter frequency while
running, which is very useful for bench testing with a vibration
source
use a single float return rather than two APIs.
This also changes the MPU6k driver to match the new 2.9 behaviour of
using the MPU6k sample timing instead of micros()
this lets the caller not need to know the underlying sample rate. They
just ask for what rate updates happen.
This also changes the MPU6k filtering to be less than half the sample
rate
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
Updated ArduCopter, ArduPlane and example sketches in AP_InertialSensor, AP_IMU and AP_AHRS libraries because they no longer need to pass in cs_pin to the constructor
This reduces the delay between when data arrives and when it is used
by up to 1ms.
Added num_samples_available method to all InertialSensors to allow
main loop timing to be synced with sensors.
Gustavo Jose de Sousa
Lucas De Marchi
Andrew Tridgell
Jonathan Challinger
Andrew Tridgell
Víctor Mayoral Vilches
Randy Mackay
Pat Hickey
James Bielman
uncrustify
Craig Elder