This adds a hwdef.dat define HAL_PROBE_EXTERNAL_I2C_BAROS. When set,
we get a new parameter GND_PROBE_EXT that is a bitmask of i2c
barometers to look for.
This allows boards that have no builtin baro to work without
rebuilding
AP_WheelEncoder: add error reporting for attaching of interrupts
AP_WheelEncoder: use detach_interrupt method
AP_WheelEncoder: correct initialisation of wheelencoder instances
AP_WheelEncoder: make update_phase_and_error_count non-static
AP_WheelEncoder: use (uint8_t)-1 in place of 255
AP_RPM: move PX4 IRQ handling into AP_HAL_PX4
AP_RPM: correct RPM sensor initialisation
The initialisation code used the type from the wrong configuration
parameters (if the first rpm sensor wasn't configured then the sensing
for the second sensor would use the type from the first).
The packing of drivers[...] was done in a non-sparse manner - i.e. if a
sensor wasn't detected then it would not take up space in the array.
The PX4 PWM backend relies on the instance number (offset in the drivers
array) corresponding to the parameters, so making this sparse is
required.
The main detection block fills in drivers based on the number of
instances detected so far, but the nullptr check checks based on the
number of detected backends. If the second instance wasn't configured we
wouldn't attempt to configure a third.
AP_RPM: add error reporting for attaching of interrupts
AP_RPM: use detach_interrupt method
AP_RPM: use (uint8_t)-1 in place of 255
AP_HAL: add type-safety for interrupt types
AP_HAL: remove interrupt-low and interrupt-high, and interrupt-none
It is possible that the radio needs very tight timings - do not force
the use of the functor interface
AP_HAL: add detach_interrupt method
Andrew Tridgell
Patrick José Pereira
pierre-louis.k
Mateusz Sadowski
Randy Mackay
Pierre Kancir
Michael du Breuil
Peter Barker
Raouf
Leonard Hall