f6f5967a82
AR_AttitudeControl: minor param desc fix
6 years ago
0cbc612ef6
autotest: fixed copy of gen_stable.py
6 years ago
d1f7485e14
Rover: add STICK_MIXNG param
6 years ago
a798f9eb27
Rover: refactor motor.set_steering() to mode.set_steering()
6 years ago
6970a66cad
Plane: refactor stick_mixing to library
6 years ago
fbe43dba5c
RC_Channel: refactor stick_mixing to library
6 years ago
11021bbaa9
HAL_ChibiOS: fixed LEDs on new CUAVv5 revision
6 years ago
8d2f016cc8
HAL_ChibiOS: fixed LEDs on CUAVv5Nano
...
need to be opendrain
6 years ago
0e28f66761
AP_Notify: don't use pinMode for pixracer LEDs
...
this is needed for LEDs that are driven by 5V, which means they need
to use OPENDRAIN.
6 years ago
26a6cccf21
AP_HAL_ChibiOS: KakuteF7 add two PWM pin options
6 years ago
ef5f83d0b5
AP_IOMCU: remove 2s delay on boot and skip crc check on watchdog
...
thanks to @Jaaaky for the suggestion in #11232
6 years ago
6ed8b2aad9
AP_Baro: Fix not healthy by watchdog reset
6 years ago
4deb2c38f6
HAL_ChibiOS: fixed brick2 valid status in POWR flags for fmuv5
...
and fixed sense of VBUS
6 years ago
a46ea1d5c5
Tools: keep old stable releases
...
this will ensure that all future stable releases are kept for users to
select with the GCS
6 years ago
971e3af826
GCS_MAVLink: prgama away address-of-packed-member only for g++ >= 9
6 years ago
48aacb9462
HAL_Linux: removed use of RCInput_SBUS and RCInput_115200
6 years ago
1c322d296f
HAL_Linux: switch Disco to using AP_RCProtocol library for RCIN
...
this is the first step to using AP_RCProtocol for most (or all) RC
input on Linux boards. It also fixes a major bug on Disco where the
old SBUS decoder didn't use strict enough timing checks to filter out
bad frames when video capture is running. That led to erratic flight
mode changes and sometimes loss of control.
6 years ago
5520b397c2
AP_HAL_Linux: allow disco to use RCInput_UDP
...
This allows to use any device to send RCInput to Disco via network.
Particularly this is useful when paired to additional changes on
SkyController 2 so it can be used to control Ardupilot.
This was tested with https://github.com/lucasdemarchi/dema-rc running
on SkyController 2.
6 years ago
a2105e1f81
Tools: autotest: correct statustext sending under Python3
6 years ago
18391d8a9a
Tools: autotest: produce stacktraces under Python3
6 years ago
9273ac3631
GCS_MAVLink: pragma away address-of-packed-member
...
g++-9 throws a lot of warnings for taking addresses of packed members.
We can have this warning for our ArduPilot code, but there's way too
many issues within MAVLink to put up with.
6 years ago
900d9f71f6
AP_HAL_SITL: stop taking address of packed members
6 years ago
2f7f361968
Tools: waf: do not permit taking address of packed members under clang++
6 years ago
459f2e62c9
Tools: autotest: correct bad INS_LOG_BAT_MASK default
...
This is an AP_Int8
6 years ago
b1df8327d4
Rover: fix misleading param comments
6 years ago
427a88a1fe
AP_Compass: fix AP_Compass_test
6 years ago
ff5cedc49f
AP_AHRS: add missing include
6 years ago
deb6aafcbe
AP_GPS: fix GPS_AUTO_test
6 years ago
cd72657c94
Plane: fixed qautotune exit
...
this was lost in the onion changes
6 years ago
3170327a9c
Tools: added SpringValley flying site
6 years ago
464540ab56
AP_HAL_ChibiOS: tune delay for flashing bootloader
...
As the function can internally loop for 10 seconds
6 years ago
47c65314fb
AP_InertialSensor: fix accelcalsimple watchdog
6 years ago
a0c80a0b3b
GCS_MAVLink: make send_text and send_textv const
6 years ago
c3f53c55f6
Tools: Fixed and updated Cygwin environment install scripts
6 years ago
bc485c4c27
Tools: re-added execution flag to environment install scripts
6 years ago
4a237af093
Tools: autotest: ensure reboot if dataflash-over-mavlink test fails
...
Will stop cascading failures from occuring
6 years ago
d9e40203b2
Tools: autotest: remove defunct MAG_ENABLE from defaults files
...
Removed entirely rather than updated as "enabled" is the default across
our vehicles.
6 years ago
110971d924
Rover: 3.5.1-rc1 release notes
6 years ago
73973c77d7
Copter: 3.6.9-rc2 release notes
6 years ago
0472c7e6dd
Copter: 3.6.9-rc1 release notes
6 years ago
d05a4a04c5
Tools: autotest: add autotest for sink-rate triggering
6 years ago
4881d32b18
Tools: added a script to generate missing firmware-version.txt files
6 years ago
709a4d00d9
Tools: simplify and fix manifest generation
6 years ago
e98d5094b5
Tools: cleanups to generate_manifest.py
6 years ago
f48d07ffca
HAL_ChibiOS: added WARN_IF_UNUSED based on PR feedback
6 years ago
ce9b75fdf0
HAL_ChibiOS: added timeouts on all SPI transfers
...
this is never expected to trigger unless we have a severe MCU error as
SPI transfers don't rely on a response from a device.
The only case that we could get a timeout is when a bug leads to use
doing transfers from memory that does not support the DMA
transaction (such as on H7). This change turns that from a immediately
fatal lockup into a bus error and failed sensor
6 years ago
8e1f100d98
AP_InternalError: added spi timeout error
6 years ago
040fa3e10a
AP_Parachute: Added time check for sink rate to avoid glitches
...
Signed-off-by: Vinicius Knabben <viniciusknabben@hotmail.com>
6 years ago
55dca5cda9
Copter: added in sink rate for parachute check
6 years ago
c710002bc9
AP_Parachute: Added parachute release at critical sink rate
...
Signed-off-by: Vinicius Knabben <viniciusknabben@hotmail.com>
6 years ago
Randy Mackay
Andrew Tridgell
Tom Pittenger
Peter Hall
Jaaaky
Lucas De Marchi
Peter Barker
Pierre Kancir
Stephen Dade
Vinicius Knabben