zrzk
/
zr-v4
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
32189 Commits
10 Branches
0 Tags
227 MiB
 
 
 
 
 
 
Tree: 31e7131c33
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '31e7131c33'
${ noResults }
zr-v4/libraries/AP_HAL_F4Light/HAL_F4Light_Class.cpp

488 lines
16 KiB
Raw Blame History

/*
(c) 2017 night_ghost@ykoctpa.ru
*/
#pragma GCC optimize ("O2")
#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_F4LIGHT
#include <assert.h>
#include <AP_HAL_F4Light/AP_HAL_F4Light.h>
#include "AP_HAL_F4Light_Namespace.h"
#include "AP_HAL_F4Light_Private.h"
#include "HAL_F4Light_Class.h"
#include "RCInput.h"
#include "Util.h"
#include <AP_Param_Helper/AP_Param_Helper.h>
#include "UART_PPM.h"
#if defined(USE_SOFTSERIAL)
#include "UART_SoftDriver.h"
#endif
#if defined(BOARD_SDCARD_NAME) || defined(BOARD_DATAFLASH_FATFS)
#include "sd/SD.h"
#endif
#if defined(BOARD_OSD_CS_PIN)
#include "UART_OSD.h"
#endif
#if defined(USB_MASSSTORAGE)
#include "massstorage/mass_storage.h"
#endif
using namespace F4Light;
static F4Light::I2CDeviceManager i2c_mgr_instance;
// XXX make sure these are assigned correctly
static USBDriver USB_Driver(1); // ACM
static UARTDriver uart1Driver(_USART1); // main port
#if defined(BOARD_USART6_RX_PIN) && defined(BOARD_USART6_TX_PIN)
static UARTDriver uart6Driver(_USART6); // pin 7&8(REVO)/5&6(RevoMini) of input port
#endif
#ifdef BOARD_HAS_UART3
static UARTDriver uart3Driver(_USART3); // flexi port
// static SerialDriver IN_CCM softDriver(BOARD_SOFTSERIAL_TX, BOARD_SOFTSERIAL_RX, false); // pin 7&8 of input port
#endif
#if defined(BOARD_SOFT_UART3) || defined(USE_SOFTSERIAL)
static SerialDriver IN_CCM softDriver(BOARD_SOFTSERIAL_TX, BOARD_SOFTSERIAL_RX, false);
#endif
#ifdef BOARD_OSD_CS_PIN
static UART_OSD uartOSDdriver;
#endif
#if defined(BOARD_USART4_RX_PIN) && defined( BOARD_USART4_TX_PIN)
static UARTDriver uart4Driver(_UART4); // pin 5&6 of servo port
#endif
#if defined(BOARD_USART5_RX_PIN) && defined( BOARD_USART5_TX_PIN)
static UARTDriver uart5Driver(_UART5);
#endif
static UART_PPM uartPPM2(1); // PPM2 input
static UART_PPM uartPPM1(0); // PPM1 input
// only for DSM satellite, served in rc_input
//static UARTDriver uart5Driver(_UART5,0); // D26/PD2 6 EXTI_RFM22B / UART5_RX input-only UART for DSM satellite
/*
input port pinout
1 2 3 4 5 6 7 8
pin b14 b15 c6 c7 c8 c9
gnd vcc PPM buzz 6_tx 6_rx Sscl Ssda
USE_SOFTSERIAL -> S_tx S_rx
servos -> srv7 srv8 srv9 srv10 srv11 srv12
*/
/* OPLINK AIR port pinout
1 2 3 4 5 6 7
gnd +5 26 103
rx pow
*/
static F4Light::SPIDeviceManager spiDeviceManager;
static AnalogIn analogIn IN_CCM;
static Storage storageDriver;
static GPIO gpioDriver;
static RCInput rcinDriver;
static RCOutput rcoutDriver;
static Scheduler schedulerInstance;
static Util utilInstance;
HAL_state HAL_F4Light::state;
//const AP_HAL::UARTDriver** HAL_F4Light::uarts[] = { &uartA, &uartB, &uartC, &uartD, &uartE, &uartF };
/*
AP_HAL::UARTDriver* _uartA, // console
AP_HAL::UARTDriver* _uartB, // 1st GPS
AP_HAL::UARTDriver* _uartC, // telem1
AP_HAL::UARTDriver* _uartD, // telem2
AP_HAL::UARTDriver* _uartE, // 2nd GPS
AP_HAL::UARTDriver* _uartF, // extra1
AP_SerialManager.cpp line 159
// initialise pointers to serial ports
state[1].uart = hal.uartC; // serial1, uartC, normally telem1
state[2].uart = hal.uartD; // serial2, uartD, normally telem2
state[3].uart = hal.uartB; // serial3, uartB, normally 1st GPS
state[4].uart = hal.uartE; // serial4, uartE, normally 2nd GPS
state[5].uart = hal.uartF; // serial5
*/
HAL_F4Light::HAL_F4Light() :
AP_HAL::HAL(
&USB_Driver, // uartA - USB console - Serial0
#if BOARD_UARTS_LAYOUT == 1 // Revolution
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
&uart3Driver, // uartD - flexi port - Serial2
&uart4Driver, // uartE - PWM pins 5&6 - Serial4
&softDriver, // uartF - soft UART on pins 7&8 - Serial5
#elif BOARD_UARTS_LAYOUT == 2 // Airbot
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
&uart4Driver, // uartD - PWM pins 5&6 - Serial2
&uartPPM2, // uartE - input data from PPM2 pin - Serial4
&uartPPM1, // uartF - input data from PPM1 pin - Serial5
#elif BOARD_UARTS_LAYOUT == 3 // AirbotV2
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
&uartOSDdriver, // uartD - OSD emulated UART - Serial2
&uart4Driver, // uartE - PWM pins 5&6 - Serial4
&uartPPM2, // uartF - input data from PPM2 pin - Serial5
#elif BOARD_UARTS_LAYOUT == 4 // MiniOSD
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
NULL,
NULL,
NULL,
#elif BOARD_UARTS_LAYOUT == 5 // MicroOSD
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
NULL,
NULL,
NULL,
#elif BOARD_UARTS_LAYOUT == 6 // MatekF405_CTR
&uart4Driver, // uartB - UART4 for GPS - Serial3
&uart1Driver, // uartC - UART1 for telemetry - Serial1
&uartOSDdriver, // uartD - OSD emulated UART - Serial2
&uart3Driver, // uartE - UART3 - Serial4
&uart5Driver, // uartF - UART5 - Serial5
#elif BOARD_UARTS_LAYOUT == 7 // Cl_Racing F4
&uart6Driver, // uartB - pin 7&8(REVO)/5&6(RevoMini) of input port - for GPS - Serial3
&uart1Driver, // uartC - main port - for telemetry - Serial1
&uartOSDdriver, // uartD - OSD emulated UART - Serial2
&uartPPM1, // uartE - input data from PPM1 pin - Serial4
NULL, // no uartF
#else
#error no BOARD_UARTS_LAYOUT!
#endif
&i2c_mgr_instance, // I2C
&spiDeviceManager, // spi
&analogIn, // analogin
&storageDriver, // storage
&HAL_CONSOLE, // console via radio or USB on per-board basis
&gpioDriver, // gpio
&rcinDriver, // rcinput
&rcoutDriver, // rcoutput
&schedulerInstance, // scheduler
&utilInstance, // util
nullptr, // no onboard optical flow
nullptr // no CAN
)
// 0 1 2 3 4 5
// USB Main Flexi/OSD Uart4 UART6 Soft/Uart4
, uarts{ &uartA, &uartC, &uartD, &uartE, &uartB, &uartF }
{
uint32_t sig = board_get_rtc_register(RTC_CONSOLE_REG);
if( (sig & ~CONSOLE_PORT_MASK) == CONSOLE_PORT_SIGNATURE) {
AP_HAL::UARTDriver** up = uarts[sig & CONSOLE_PORT_MASK];
if(up){
console = *up;
}
}
}
extern const AP_HAL::HAL& hal;
void HAL_F4Light::run(int argc,char* const argv[], Callbacks* callbacks) const
{
assert(callbacks);
/* initialize all drivers and private members here.
* up to the programmer to do this in the correct order.
* Scheduler should likely come first. */
scheduler->init();
uint32_t start_t = AP_HAL::millis();
gpio->init();
rcout->init();
usart_disable_all();
{
#if defined(USB_MASSSTORAGE)
uint32_t sig = board_get_rtc_register(RTC_MASS_STORAGE_REG);
if( sig == MASS_STORAGE_SIGNATURE) {
board_set_rtc_register(0, RTC_MASS_STORAGE_REG);
#if defined(BOARD_SDCARD_NAME) && defined(BOARD_SDCARD_CS_PIN)
SD.begin(F4Light::SPIDeviceManager::_get_device(BOARD_SDCARD_NAME));
#elif defined(BOARD_DATAFLASH_FATFS)
SD.begin(F4Light::SPIDeviceManager::_get_device(HAL_DATAFLASH_NAME));
#endif
state.sd_busy=true;
massstorage.setup(); // init USB as mass-storage
}
else
#endif
{
extern void usb_init(); // init as VCP
usb_init(); // moved from boards.cpp
uartA->begin(115200); // uartA is the USB serial port used for the console, so lets make sure it is initialized at boot
}
}
if(console != uartA) {
console->begin(57600); // init telemetry port as console
}
rcin->init();
storage->init(); // Uses EEPROM.*, flash_stm* reworked
analogin->init();
printf("\nHAL startup at %ldms\n", start_t);
if(!state.sd_busy) {
#if defined(BOARD_SDCARD_NAME) && defined(BOARD_SDCARD_CS_PIN)
printf("\nEnabling SD at %ldms\n", AP_HAL::millis());
SD.begin(F4Light::SPIDeviceManager::_get_device(BOARD_SDCARD_NAME));
#elif defined(BOARD_DATAFLASH_FATFS)
printf("\nEnabling DataFlash as SD at %ldms\n", AP_HAL::millis());
SD.begin(F4Light::SPIDeviceManager::_get_device(HAL_DATAFLASH_NAME));
#endif
#if defined(BOARD_OSD_NAME)
uartOSDdriver.begin(57600); // init OSD after SD but before call to lateInit(), but only if not in USB_STORAGE
#endif
}
printf("\nHAL init done at %ldms\n", AP_HAL::millis());
callbacks->setup();
#if 0 //[ here is too late :( so we need a small hack and call lateInit from Scheduler::register_delay_callback
// which called when parameters already initialized
lateInit();
#endif //]
scheduler->system_initialized(); // clear bootloader flag
Scheduler::start_stats_task();
printf("\nLoop started at %ldms\n", AP_HAL::millis());
// main application loop hosted here!
for (;;) {
callbacks->loop();
// ((F4Light::Scheduler *)scheduler)->loop(); // to execute stats in main loop
// ((F4Light::RCInput *)rcin)->loop(); // to execute debug in main loop
}
}
static bool lateInitDone=false;
void HAL_F4Light::lateInit() {
if(lateInitDone) return;
lateInitDone=true;
{
uint32_t sig = board_get_rtc_register(RTC_CONSOLE_REG);
uint8_t port = hal_param_helper->_console_uart;
if(port < sizeof(uarts)/sizeof(AP_HAL::UARTDriver**) ){
if( (sig & ~CONSOLE_PORT_MASK) == CONSOLE_PORT_SIGNATURE) {
if(port != (sig & CONSOLE_PORT_MASK)) { // wrong console - reboot needed
board_set_rtc_register(CONSOLE_PORT_SIGNATURE | (port & CONSOLE_PORT_MASK), RTC_CONSOLE_REG);
board_set_rtc_register(FORCE_APP_RTC_SIGNATURE, RTC_SIGNATURE_REG); // force bootloader to not wait
Scheduler::_reboot(false);
}
} else { // no signature - set and check console
board_set_rtc_register(CONSOLE_PORT_SIGNATURE | (port & CONSOLE_PORT_MASK), RTC_CONSOLE_REG);
AP_HAL::UARTDriver** up = uarts[port];
if(up && *up != console) {
board_set_rtc_register(FORCE_APP_RTC_SIGNATURE, RTC_SIGNATURE_REG); // force bootloader to not wait
Scheduler::_reboot(false);
}
}
}
}
{
uint32_t g = board_get_rtc_register(RTC_OV_GUARD_REG);
uint32_t sig = board_get_rtc_register(RTC_OVERCLOCK_REG);
uint8_t oc = hal_param_helper->_overclock;
if(g==OV_GUARD_FAIL_SIGNATURE) {
if(oc==0) {
board_set_rtc_register(OVERCLOCK_SIGNATURE | oc, RTC_OVERCLOCK_REG); // set default clock
board_set_rtc_register(0, RTC_OV_GUARD_REG); // and reset failure
} else printf("\noverclocking failed!\n");
} else {
if((sig & ~OVERCLOCK_SIG_MASK ) == OVERCLOCK_SIGNATURE ) { // if correct signature
board_set_rtc_register(OVERCLOCK_SIGNATURE | oc, RTC_OVERCLOCK_REG); // set required clock in any case
if((sig & OVERCLOCK_SIG_MASK) != oc) { // if wrong clock
board_set_rtc_register(FORCE_APP_RTC_SIGNATURE, RTC_SIGNATURE_REG); // force bootloader to not wait
Scheduler::_reboot(false); // then reboot required
}
} else { // no signature, write only if needed
if(oc) board_set_rtc_register(OVERCLOCK_SIGNATURE | oc, RTC_OVERCLOCK_REG); // set required clock
}
}
}
{ // one-time connection to COM-port
uint8_t conn = hal_param_helper->_connect_com;
if(conn) {
hal_param_helper->_connect_com = 0;
hal_param_helper->_connect_com.save();
if(conn < sizeof(uarts)/sizeof(AP_HAL::UARTDriver**) ){
AP_HAL::UARTDriver** up = uarts[conn];
if(up && *up){
connect_uart(uartA,*up, NULL);
}
} else printf("\nWrong HAL_CONNECT_COM selected!");
}
}
#if defined(USB_MASSSTORAGE)
if(!state.sd_busy){
uint8_t conn=hal_param_helper->_usb_storage;
if(conn){
hal_param_helper->_usb_storage=0;
hal_param_helper->_usb_storage.save();
board_set_rtc_register(MASS_STORAGE_SIGNATURE, RTC_MASS_STORAGE_REG);
board_set_rtc_register(FORCE_APP_RTC_SIGNATURE, RTC_SIGNATURE_REG); // force bootloader to not wait
Scheduler::_reboot(false);
}
}
#endif
#ifdef USE_SERIAL_4WAY_BLHELI_INTERFACE
{ // one-time connection to ESC
uint8_t conn = hal_param_helper->_connect_esc;
if(conn){
hal_param_helper->_connect_esc = 0;
hal_param_helper->_connect_esc.save();
conn-=1;
if(conn < sizeof(uarts)/sizeof(AP_HAL::UARTDriver**) ){
AP_HAL::UARTDriver** up = uarts[conn];
if(up && *up){
RCOutput::do_4way_if(*up);
}
} else printf("\nWrong HAL_CONNECT_ESC selected!");
}
}
#endif
RCOutput::lateInit(); // 2nd stage - now with loaded parameters
// all another parameter-dependent inits
#ifdef BOARD_I2C_FLEXI
if(hal_param_helper->_flexi_i2c) {
uart3Driver.end();
uart3Driver.disable(); // uses Flexi port occupied by I2C
printf("\nUART3 disabled by I2C2\n");
}
#endif
I2CDevice::lateInit();
Storage::late_init(hal_param_helper->_eeprom_deferred);
uint8_t flags=0;
if(hal_param_helper->_rc_fs) flags |= BOARD_RC_FAILSAFE;
RCInput::late_init(flags);
}
// 57600 gives ~6500 chars per second or 6 chars per ms
void HAL_F4Light::connect_uart(AP_HAL::UARTDriver* uartL,AP_HAL::UARTDriver* uartR, AP_HAL::Proc proc){
while(1){
bool got=false;
if(uartL->available() && uartR->txspace()) { uartR->write(uartL->read()); got=true; }
if(uartR->available() && uartL->txspace()) { uartL->write(uartR->read()); got=true; }
if(proc) proc();
if(!got) Scheduler::yield(100); // give a chance to other threads
if(state.disconnect) break; // if USB disconnected
}
}
static const HAL_F4Light hal_revo;
const AP_HAL::HAL& AP_HAL::get_HAL() {
return hal_revo;
}
extern "C" void usb_mass_mal_USBdisconnect();
void usb_mass_mal_USBdisconnect(){
HAL_F4Light::state.sd_busy=false;
HAL_F4Light::state.disconnect=true;
}
#endif