You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
187 lines
6.3 KiB
187 lines
6.3 KiB
#include "Rover.h" |
|
|
|
/** |
|
* |
|
* Detects failures of the ekf and triggers a failsafe |
|
* |
|
*/ |
|
|
|
#ifndef EKF_CHECK_ITERATIONS_MAX |
|
# define EKF_CHECK_ITERATIONS_MAX 10 // 1 second (ie. 10 iterations at 10hz) of bad variances signals a failure |
|
#endif |
|
|
|
#ifndef EKF_CHECK_WARNING_TIME |
|
# define EKF_CHECK_WARNING_TIME (30*1000) // warning text messages are sent to ground no more than every 30 seconds |
|
#endif |
|
|
|
|
|
// EKF_check structure |
|
static struct { |
|
uint8_t fail_count; // number of iterations ekf or dcm have been out of tolerances |
|
uint8_t bad_variance : 1; // true if ekf should be considered untrusted (fail_count has exceeded EKF_CHECK_ITERATIONS_MAX) |
|
uint32_t last_warn_time; // system time of last warning in milliseconds. Used to throttle text warnings sent to GCS |
|
} ekf_check_state; |
|
|
|
// ekf_check - detects if ekf variance are out of tolerance and triggers failsafe |
|
// should be called at 10hz |
|
void Rover::ekf_check() |
|
{ |
|
// exit immediately if ekf has no origin yet - this assumes the origin can never become unset |
|
Location temp_loc; |
|
if (!ahrs.get_origin(temp_loc)) { |
|
return; |
|
} |
|
|
|
// return immediately if motors are not armed, or ekf check is disabled |
|
if (!arming.is_armed() || (g.fs_ekf_thresh <= 0.0f)) { |
|
ekf_check_state.fail_count = 0; |
|
ekf_check_state.bad_variance = false; |
|
AP_Notify::flags.ekf_bad = ekf_check_state.bad_variance; |
|
failsafe_ekf_off_event(); // clear failsafe |
|
return; |
|
} |
|
|
|
// compare compass and velocity variance vs threshold |
|
if (ekf_over_threshold()) { |
|
// if compass is not yet flagged as bad |
|
if (!ekf_check_state.bad_variance) { |
|
// increase counter |
|
ekf_check_state.fail_count++; |
|
// if counter above max then trigger failsafe |
|
if (ekf_check_state.fail_count >= EKF_CHECK_ITERATIONS_MAX) { |
|
// limit count from climbing too high |
|
ekf_check_state.fail_count = EKF_CHECK_ITERATIONS_MAX; |
|
ekf_check_state.bad_variance = true; |
|
|
|
AP::logger().Write_Error(LogErrorSubsystem::EKFCHECK, |
|
LogErrorCode::EKFCHECK_BAD_VARIANCE); |
|
// send message to gcs |
|
if ((AP_HAL::millis() - ekf_check_state.last_warn_time) > EKF_CHECK_WARNING_TIME) { |
|
gcs().send_text(MAV_SEVERITY_CRITICAL,"EKF variance"); |
|
ekf_check_state.last_warn_time = AP_HAL::millis(); |
|
} |
|
failsafe_ekf_event(); |
|
} |
|
} |
|
} else { |
|
// reduce counter |
|
if (ekf_check_state.fail_count > 0) { |
|
ekf_check_state.fail_count--; |
|
|
|
// if variance is flagged as bad and the counter reaches zero then clear flag |
|
if (ekf_check_state.bad_variance && ekf_check_state.fail_count == 0) { |
|
ekf_check_state.bad_variance = false; |
|
AP::logger().Write_Error(LogErrorSubsystem::EKFCHECK, |
|
LogErrorCode::EKFCHECK_VARIANCE_CLEARED); |
|
// clear failsafe |
|
failsafe_ekf_off_event(); |
|
} |
|
} |
|
} |
|
|
|
// set AP_Notify flags |
|
AP_Notify::flags.ekf_bad = ekf_check_state.bad_variance; |
|
} |
|
|
|
// returns true if the ekf's variance are over the tolerance |
|
bool Rover::ekf_over_threshold() |
|
{ |
|
// return false immediately if disabled |
|
if (g.fs_ekf_thresh <= 0.0f) { |
|
return false; |
|
} |
|
|
|
// use EKF to get variance |
|
float position_variance, vel_variance, height_variance, tas_variance; |
|
Vector3f mag_variance; |
|
Vector2f offset; |
|
ahrs.get_variances(vel_variance, position_variance, height_variance, mag_variance, tas_variance, offset); |
|
|
|
// return true if two of compass, velocity and position variances are over the threshold |
|
uint8_t over_thresh_count = 0; |
|
if (mag_variance.length() >= g.fs_ekf_thresh) { |
|
over_thresh_count++; |
|
} |
|
if (vel_variance >= g.fs_ekf_thresh) { |
|
over_thresh_count++; |
|
} |
|
if (position_variance >= g.fs_ekf_thresh) { |
|
over_thresh_count++; |
|
} |
|
|
|
if (over_thresh_count >= 2) { |
|
return true; |
|
} |
|
|
|
if (ekf_position_ok()) { |
|
return false; |
|
} |
|
|
|
return true; |
|
} |
|
|
|
// ekf_position_ok - returns true if the ekf claims it's horizontal absolute position estimate is ok and home position is set |
|
bool Rover::ekf_position_ok() |
|
{ |
|
if (!ahrs.have_inertial_nav()) { |
|
// do not allow navigation with dcm position |
|
return false; |
|
} |
|
|
|
// get EKF filter status |
|
nav_filter_status filt_status; |
|
rover.ahrs.get_filter_status(filt_status); |
|
|
|
// if disarmed we accept a predicted horizontal absolute or relative position |
|
if (!arming.is_armed()) { |
|
return (filt_status.flags.horiz_pos_abs || filt_status.flags.pred_horiz_pos_abs || filt_status.flags.horiz_pos_rel || filt_status.flags.pred_horiz_pos_rel); |
|
} else { |
|
// once armed we require a good absolute or relative position and EKF must not be in const_pos_mode |
|
return ((filt_status.flags.horiz_pos_abs || filt_status.flags.horiz_pos_rel) && !filt_status.flags.const_pos_mode); |
|
} |
|
} |
|
|
|
// perform ekf failsafe |
|
void Rover::failsafe_ekf_event() |
|
{ |
|
// return immediately if ekf failsafe already triggered |
|
if (failsafe.ekf) { |
|
return; |
|
} |
|
|
|
// EKF failsafe event has occurred |
|
failsafe.ekf = true; |
|
AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_EKFINAV, |
|
LogErrorCode::FAILSAFE_OCCURRED); |
|
gcs().send_text(MAV_SEVERITY_CRITICAL,"EKF failsafe!"); |
|
|
|
// does this mode require position? |
|
if (!control_mode->requires_position()) { |
|
return; |
|
} |
|
|
|
// take action based on fs_ekf_action parameter |
|
switch ((enum fs_ekf_action)g.fs_ekf_action.get()) { |
|
case FS_EKF_DISABLE: |
|
// do nothing |
|
break; |
|
case FS_EFK_HOLD: |
|
default: |
|
set_mode(mode_hold, ModeReason::EKF_FAILSAFE); |
|
break; |
|
} |
|
} |
|
|
|
// failsafe_ekf_off_event - actions to take when EKF failsafe is cleared |
|
void Rover::failsafe_ekf_off_event(void) |
|
{ |
|
// return immediately if not in ekf failsafe |
|
if (!failsafe.ekf) { |
|
return; |
|
} |
|
|
|
failsafe.ekf = false; |
|
AP::logger().Write_Error(LogErrorSubsystem::FAILSAFE_EKFINAV, |
|
LogErrorCode::FAILSAFE_RESOLVED); |
|
gcs().send_text(MAV_SEVERITY_CRITICAL,"EKF failsafe cleared"); |
|
}
|
|
|