You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
928 lines
29 KiB
928 lines
29 KiB
/// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- |
|
|
|
#define THISFIRMWARE "ArduRover v2.43beta4" |
|
/* |
|
This program is free software: you can redistribute it and/or modify |
|
it under the terms of the GNU General Public License as published by |
|
the Free Software Foundation, either version 3 of the License, or |
|
(at your option) any later version. |
|
|
|
This program is distributed in the hope that it will be useful, |
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
|
GNU General Public License for more details. |
|
|
|
You should have received a copy of the GNU General Public License |
|
along with this program. If not, see <http://www.gnu.org/licenses/>. |
|
*/ |
|
|
|
/* |
|
This is the APMrover2 firmware. It was originally derived from |
|
ArduPlane by Jean-Louis Naudin (JLN), and then rewritten after the |
|
AP_HAL merge by Andrew Tridgell |
|
|
|
Maintainer: Andrew Tridgell |
|
|
|
Authors: Doug Weibel, Jose Julio, Jordi Munoz, Jason Short, Andrew Tridgell, Randy Mackay, Pat Hickey, John Arne Birkeland, Olivier Adler, Jean-Louis Naudin |
|
|
|
Thanks to: Chris Anderson, Michael Oborne, Paul Mather, Bill Premerlani, James Cohen, JB from rotorFX, Automatik, Fefenin, Peter Meister, Remzibi, Yury Smirnov, Sandro Benigno, Max Levine, Roberto Navoni, Lorenz Meier |
|
|
|
APMrover alpha version tester: Franco Borasio, Daniel Chapelat... |
|
|
|
Please contribute your ideas! See http://dev.ardupilot.com for details |
|
*/ |
|
|
|
// Radio setup: |
|
// APM INPUT (Rec = receiver) |
|
// Rec ch1: Steering |
|
// Rec ch2: not used |
|
// Rec ch3: Throttle |
|
// Rec ch4: not used |
|
// Rec ch5: not used |
|
// Rec ch6: not used |
|
// Rec ch7: Option channel to 2 position switch |
|
// Rec ch8: Mode channel to 6 position switch |
|
// APM OUTPUT |
|
// Ch1: Wheel servo (direction) |
|
// Ch2: not used |
|
// Ch3: to the motor ESC |
|
// Ch4: not used |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Header includes |
|
//////////////////////////////////////////////////////////////////////////////// |
|
|
|
#include <math.h> |
|
#include <stdarg.h> |
|
#include <stdio.h> |
|
|
|
// Libraries |
|
#include <AP_Common.h> |
|
#include <AP_Progmem.h> |
|
#include <AP_HAL.h> |
|
#include <AP_Menu.h> |
|
#include <AP_Param.h> |
|
#include <AP_GPS.h> // ArduPilot GPS library |
|
#include <AP_ADC.h> // ArduPilot Mega Analog to Digital Converter Library |
|
#include <AP_ADC_AnalogSource.h> |
|
#include <AP_Baro.h> |
|
#include <AP_Compass.h> // ArduPilot Mega Magnetometer Library |
|
#include <AP_Math.h> // ArduPilot Mega Vector/Matrix math Library |
|
#include <AP_InertialSensor.h> // Inertial Sensor (uncalibated IMU) Library |
|
#include <AP_AHRS.h> // ArduPilot Mega DCM Library |
|
#include <PID.h> // PID library |
|
#include <RC_Channel.h> // RC Channel Library |
|
#include <AP_RangeFinder.h> // Range finder library |
|
#include <Filter.h> // Filter library |
|
#include <Butter.h> // Filter library - butterworth filter |
|
#include <AP_Buffer.h> // FIFO buffer library |
|
#include <ModeFilter.h> // Mode Filter from Filter library |
|
#include <AverageFilter.h> // Mode Filter from Filter library |
|
#include <AP_Relay.h> // APM relay |
|
#include <AP_Mount.h> // Camera/Antenna mount |
|
#include <AP_Camera.h> // Camera triggering |
|
#include <GCS_MAVLink.h> // MAVLink GCS definitions |
|
#include <AP_Airspeed.h> // needed for AHRS build |
|
#include <AP_Vehicle.h> // needed for AHRS build |
|
#include <memcheck.h> |
|
#include <DataFlash.h> |
|
#include <AP_RCMapper.h> // RC input mapping library |
|
#include <SITL.h> |
|
#include <AP_Scheduler.h> // main loop scheduler |
|
#include <stdarg.h> |
|
#include <AP_Navigation.h> |
|
#include <APM_Control.h> |
|
#include <AP_L1_Control.h> |
|
|
|
#include <AP_HAL_AVR.h> |
|
#include <AP_HAL_AVR_SITL.h> |
|
#include <AP_HAL_PX4.h> |
|
#include <AP_HAL_Empty.h> |
|
#include "compat.h" |
|
|
|
#include <AP_Notify.h> // Notify library |
|
|
|
// Configuration |
|
#include "config.h" |
|
|
|
// Local modules |
|
#include "defines.h" |
|
#include "Parameters.h" |
|
#include "GCS.h" |
|
|
|
#include <AP_Declination.h> // ArduPilot Mega Declination Helper Library |
|
|
|
AP_HAL::BetterStream* cliSerial; |
|
|
|
const AP_HAL::HAL& hal = AP_HAL_BOARD_DRIVER; |
|
|
|
// this sets up the parameter table, and sets the default values. This |
|
// must be the first AP_Param variable declared to ensure its |
|
// constructor runs before the constructors of the other AP_Param |
|
// variables |
|
AP_Param param_loader(var_info, WP_START_BYTE); |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// the rate we run the main loop at |
|
//////////////////////////////////////////////////////////////////////////////// |
|
static const AP_InertialSensor::Sample_rate ins_sample_rate = AP_InertialSensor::RATE_50HZ; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Parameters |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// |
|
// Global parameters are all contained within the 'g' class. |
|
// |
|
static Parameters g; |
|
|
|
// main loop scheduler |
|
static AP_Scheduler scheduler; |
|
|
|
// mapping between input channels |
|
static RCMapper rcmap; |
|
|
|
// primary control channels |
|
static RC_Channel *channel_steer; |
|
static RC_Channel *channel_throttle; |
|
static RC_Channel *channel_learn; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// prototypes |
|
static void update_events(void); |
|
void gcs_send_text_fmt(const prog_char_t *fmt, ...); |
|
static void print_mode(AP_HAL::BetterStream *port, uint8_t mode); |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// DataFlash |
|
//////////////////////////////////////////////////////////////////////////////// |
|
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1 |
|
static DataFlash_APM1 DataFlash; |
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_APM2 |
|
static DataFlash_APM2 DataFlash; |
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_AVR_SITL |
|
//static DataFlash_File DataFlash("/tmp/APMlogs"); |
|
static DataFlash_SITL DataFlash; |
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_PX4 |
|
static DataFlash_File DataFlash("/fs/microsd/APM/logs"); |
|
#else |
|
DataFlash_Empty DataFlash; |
|
#endif |
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Sensors |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// |
|
// There are three basic options related to flight sensor selection. |
|
// |
|
// - Normal driving mode. Real sensors are used. |
|
// - HIL Attitude mode. Most sensors are disabled, as the HIL |
|
// protocol supplies attitude information directly. |
|
// - HIL Sensors mode. Synthetic sensors are configured that |
|
// supply data from the simulation. |
|
// |
|
|
|
// All GPS access should be through this pointer. |
|
static GPS *g_gps; |
|
|
|
// flight modes convenience array |
|
static AP_Int8 *modes = &g.mode1; |
|
|
|
#if CONFIG_HAL_BOARD == HAL_BOARD_APM1 |
|
static AP_ADC_ADS7844 adc; |
|
#endif |
|
|
|
#if CONFIG_COMPASS == AP_COMPASS_PX4 |
|
static AP_Compass_PX4 compass; |
|
#elif CONFIG_COMPASS == AP_COMPASS_HMC5843 |
|
static AP_Compass_HMC5843 compass; |
|
#elif CONFIG_COMPASS == AP_COMPASS_HIL |
|
static AP_Compass_HIL compass; |
|
#else |
|
#error Unrecognized CONFIG_COMPASS setting |
|
#endif |
|
|
|
// GPS selection |
|
#if GPS_PROTOCOL == GPS_PROTOCOL_AUTO |
|
AP_GPS_Auto g_gps_driver(&g_gps); |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_NMEA |
|
AP_GPS_NMEA g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_SIRF |
|
AP_GPS_SIRF g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_UBLOX |
|
AP_GPS_UBLOX g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_MTK |
|
AP_GPS_MTK g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_MTK19 |
|
AP_GPS_MTK19 g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_NONE |
|
AP_GPS_None g_gps_driver; |
|
|
|
#elif GPS_PROTOCOL == GPS_PROTOCOL_HIL |
|
AP_GPS_HIL g_gps_driver; |
|
|
|
#else |
|
#error Unrecognised GPS_PROTOCOL setting. |
|
#endif // GPS PROTOCOL |
|
|
|
#if CONFIG_INS_TYPE == CONFIG_INS_MPU6000 |
|
AP_InertialSensor_MPU6000 ins; |
|
#elif CONFIG_INS_TYPE == CONFIG_INS_PX4 |
|
AP_InertialSensor_PX4 ins; |
|
#elif CONFIG_INS_TYPE == CONFIG_INS_STUB |
|
AP_InertialSensor_Stub ins; |
|
#elif CONFIG_INS_TYPE == CONFIG_INS_OILPAN |
|
AP_InertialSensor_Oilpan ins( &adc ); |
|
#else |
|
#error Unrecognised CONFIG_INS_TYPE setting. |
|
#endif // CONFIG_INS_TYPE |
|
|
|
AP_AHRS_DCM ahrs(&ins, g_gps); |
|
|
|
static AP_L1_Control L1_controller(ahrs); |
|
|
|
// selected navigation controller |
|
static AP_Navigation *nav_controller = &L1_controller; |
|
|
|
// steering controller |
|
static AP_SteerController steerController(ahrs); |
|
|
|
#if CONFIG_HAL_BOARD == HAL_BOARD_AVR_SITL |
|
SITL sitl; |
|
#endif |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// GCS selection |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// |
|
GCS_MAVLINK gcs0; |
|
GCS_MAVLINK gcs3; |
|
|
|
// a pin for reading the receiver RSSI voltage. The scaling by 0.25 |
|
// is to take the 0 to 1024 range down to an 8 bit range for MAVLink |
|
AP_HAL::AnalogSource *rssi_analog_source; |
|
|
|
AP_HAL::AnalogSource *vcc_pin; |
|
|
|
AP_HAL::AnalogSource * batt_volt_pin; |
|
AP_HAL::AnalogSource * batt_curr_pin; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// SONAR selection |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// |
|
static AP_RangeFinder_analog sonar; |
|
static AP_RangeFinder_analog sonar2; |
|
|
|
// relay support |
|
AP_Relay relay; |
|
|
|
// Camera |
|
#if CAMERA == ENABLED |
|
static AP_Camera camera(&relay); |
|
#endif |
|
|
|
// The rover's current location |
|
static struct Location current_loc; |
|
|
|
|
|
// Camera/Antenna mount tracking and stabilisation stuff |
|
// -------------------------------------- |
|
#if MOUNT == ENABLED |
|
// current_loc uses the baro/gps soloution for altitude rather than gps only. |
|
// mabe one could use current_loc for lat/lon too and eliminate g_gps alltogether? |
|
AP_Mount camera_mount(¤t_loc, g_gps, &ahrs, 0); |
|
#endif |
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Global variables |
|
//////////////////////////////////////////////////////////////////////////////// |
|
|
|
// APM2 only |
|
#if USB_MUX_PIN > 0 |
|
static bool usb_connected; |
|
#endif |
|
|
|
/* Radio values |
|
Channel assignments |
|
1 Steering |
|
2 --- |
|
3 Throttle |
|
4 --- |
|
5 Aux5 |
|
6 Aux6 |
|
7 Aux7/learn |
|
8 Aux8/Mode |
|
Each Aux channel can be configured to have any of the available auxiliary functions assigned to it. |
|
See libraries/RC_Channel/RC_Channel_aux.h for more information |
|
*/ |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Radio |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// This is the state of the flight control system |
|
// There are multiple states defined such as MANUAL, FBW-A, AUTO |
|
enum mode control_mode = INITIALISING; |
|
// Used to maintain the state of the previous control switch position |
|
// This is set to -1 when we need to re-read the switch |
|
uint8_t oldSwitchPosition; |
|
// These are values received from the GCS if the user is using GCS joystick |
|
// control and are substituted for the values coming from the RC radio |
|
static int16_t rc_override[8] = {0,0,0,0,0,0,0,0}; |
|
// A flag if GCS joystick control is in use |
|
static bool rc_override_active = false; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Failsafe |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// A tracking variable for type of failsafe active |
|
// Used for failsafe based on loss of RC signal or GCS signal. See |
|
// FAILSAFE_EVENT_* |
|
static struct { |
|
uint8_t bits; |
|
uint32_t rc_override_timer; |
|
uint32_t start_time; |
|
uint8_t triggered; |
|
} failsafe; |
|
|
|
// notify object |
|
static AP_Notify notify; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// GPS variables |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// This is used to scale GPS values for EEPROM storage |
|
// 10^7 times Decimal GPS means 1 == 1cm |
|
// This approximation makes calculations integer and it's easy to read |
|
static const float t7 = 10000000.0; |
|
// We use atan2 and other trig techniques to calaculate angles |
|
|
|
// A counter used to count down valid gps fixes to allow the gps estimate to settle |
|
// before recording our home position (and executing a ground start if we booted with an air start) |
|
static uint8_t ground_start_count = 5; |
|
// Used to compute a speed estimate from the first valid gps fixes to decide if we are |
|
// on the ground or in the air. Used to decide if a ground start is appropriate if we |
|
// booted with an air start. |
|
static int16_t ground_start_avg; |
|
static int32_t gps_base_alt; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Location & Navigation |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Constants |
|
const float radius_of_earth = 6378100; // meters |
|
|
|
|
|
// true if we have a position estimate from AHRS |
|
static bool have_position; |
|
|
|
static bool rtl_complete = false; |
|
|
|
// There may be two active commands in Auto mode. |
|
// This indicates the active navigation command by index number |
|
static uint8_t nav_command_index; |
|
// This indicates the active non-navigation command by index number |
|
static uint8_t non_nav_command_index; |
|
// This is the command type (eg navigate to waypoint) of the active navigation command |
|
static uint8_t nav_command_ID = NO_COMMAND; |
|
static uint8_t non_nav_command_ID = NO_COMMAND; |
|
|
|
// ground speed error in m/s |
|
static float groundspeed_error; |
|
// 0-(throttle_max - throttle_cruise) : throttle nudge in Auto mode using top 1/2 of throttle stick travel |
|
static int16_t throttle_nudge = 0; |
|
|
|
// receiver RSSI |
|
static uint8_t receiver_rssi; |
|
|
|
// the time when the last HEARTBEAT message arrived from a GCS |
|
static uint32_t last_heartbeat_ms; |
|
|
|
// obstacle detection information |
|
static struct { |
|
// have we detected an obstacle? |
|
uint8_t detected_count; |
|
float turn_angle; |
|
uint16_t sonar1_distance_cm; |
|
uint16_t sonar2_distance_cm; |
|
|
|
// time when we last detected an obstacle, in milliseconds |
|
uint32_t detected_time_ms; |
|
} obstacle; |
|
|
|
// this is set to true when auto has been triggered to start |
|
static bool auto_triggered; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Ground speed |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// The amount current ground speed is below min ground speed. meters per second |
|
static float ground_speed = 0; |
|
static int16_t throttle_last = 0, throttle = 500; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// CH7 control |
|
//////////////////////////////////////////////////////////////////////////////// |
|
|
|
// Used to track the CH7 toggle state. |
|
// When CH7 goes LOW PWM from HIGH PWM, this value will have been set true |
|
// This allows advanced functionality to know when to execute |
|
static bool ch7_flag; |
|
// This register tracks the current Mission Command index when writing |
|
// a mission using CH7 in flight |
|
static int8_t CH7_wp_index; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Battery Sensors |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Battery pack 1 voltage. Initialized above the low voltage threshold to pre-load the filter and prevent low voltage events at startup. |
|
static float battery_voltage1 = LOW_VOLTAGE * 1.05; |
|
// Battery pack 1 instantaneous currrent draw. Amperes |
|
static float current_amps1; |
|
// Totalized current (Amp-hours) from battery 1 |
|
static float current_total1; |
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Navigation control variables |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// The instantaneous desired lateral acceleration in m/s/s |
|
static float lateral_acceleration; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Waypoint distances |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Distance between rover and next waypoint. Meters |
|
static float wp_distance; |
|
// Distance between previous and next waypoint. Meters |
|
static int32_t wp_totalDistance; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// repeating event control |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Flag indicating current event type |
|
static uint8_t event_id; |
|
// when the event was started in ms |
|
static int32_t event_timer; |
|
// how long to delay the next firing of event in millis |
|
static uint16_t event_delay; |
|
// how many times to cycle : -1 (or -2) = forever, 2 = do one cycle, 4 = do two cycles |
|
static int16_t event_repeat = 0; |
|
// per command value, such as PWM for servos |
|
static int16_t event_value; |
|
// the value used to cycle events (alternate value to event_value) |
|
static int16_t event_undo_value; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Conditional command |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// A value used in condition commands (eg delay, change alt, etc.) |
|
// For example in a change altitude command, it is the altitude to change to. |
|
static int32_t condition_value; |
|
// A starting value used to check the status of a conditional command. |
|
// For example in a delay command the condition_start records that start time for the delay |
|
static int32_t condition_start; |
|
// A value used in condition commands. For example the rate at which to change altitude. |
|
static int16_t condition_rate; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// 3D Location vectors |
|
// Location structure defined in AP_Common |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// The home location used for RTL. The location is set when we first get stable GPS lock |
|
static struct Location home; |
|
// Flag for if we have g_gps lock and have set the home location |
|
static bool home_is_set; |
|
// The location of the previous waypoint. Used for track following and altitude ramp calculations |
|
static struct Location prev_WP; |
|
// The location of the current/active waypoint. Used for track following |
|
static struct Location next_WP; |
|
// The location of the active waypoint in Guided mode. |
|
static struct Location guided_WP; |
|
|
|
// The location structure information from the Nav command being processed |
|
static struct Location next_nav_command; |
|
// The location structure information from the Non-Nav command being processed |
|
static struct Location next_nonnav_command; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// IMU variables |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// The main loop execution time. Seconds |
|
//This is the time between calls to the DCM algorithm and is the Integration time for the gyros. |
|
static float G_Dt = 0.02; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Performance monitoring |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Timer used to accrue data and trigger recording of the performanc monitoring log message |
|
static int32_t perf_mon_timer; |
|
// The maximum main loop execution time recorded in the current performance monitoring interval |
|
static int16_t G_Dt_max = 0; |
|
// The number of gps fixes recorded in the current performance monitoring interval |
|
static uint8_t gps_fix_count = 0; |
|
// A variable used by developers to track performanc metrics. |
|
// Currently used to record the number of GCS heartbeat messages received |
|
static int16_t pmTest1 = 0; |
|
|
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// System Timers |
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Time in miliseconds of start of main control loop. Milliseconds |
|
static uint32_t fast_loopTimer; |
|
// Time Stamp when fast loop was complete. Milliseconds |
|
static uint32_t fast_loopTimeStamp; |
|
// Number of milliseconds used in last main loop cycle |
|
static uint8_t delta_ms_fast_loop; |
|
// Counter of main loop executions. Used for performance monitoring and failsafe processing |
|
static uint16_t mainLoop_count; |
|
|
|
//////////////////////////////////////////////////////////////////////////////// |
|
// Top-level logic |
|
//////////////////////////////////////////////////////////////////////////////// |
|
|
|
/* |
|
scheduler table - all regular tasks apart from the fast_loop() |
|
should be listed here, along with how often they should be called |
|
(in 20ms units) and the maximum time they are expected to take (in |
|
microseconds) |
|
*/ |
|
static const AP_Scheduler::Task scheduler_tasks[] PROGMEM = { |
|
{ update_GPS, 5, 2500 }, |
|
{ navigate, 5, 1600 }, |
|
{ update_compass, 5, 2000 }, |
|
{ update_commands, 5, 1000 }, |
|
{ update_logging, 5, 1000 }, |
|
{ read_battery, 5, 1000 }, |
|
{ read_receiver_rssi, 5, 1000 }, |
|
{ read_trim_switch, 5, 1000 }, |
|
{ read_control_switch, 15, 1000 }, |
|
{ update_events, 15, 1000 }, |
|
{ check_usb_mux, 15, 1000 }, |
|
{ mount_update, 1, 500 }, |
|
{ failsafe_check, 5, 500 }, |
|
{ compass_accumulate, 1, 900 }, |
|
{ update_notify, 1, 100 }, |
|
{ one_second_loop, 50, 3000 } |
|
}; |
|
|
|
|
|
/* |
|
setup is called when the sketch starts |
|
*/ |
|
void setup() { |
|
memcheck_init(); |
|
cliSerial = hal.console; |
|
|
|
// load the default values of variables listed in var_info[] |
|
AP_Param::setup_sketch_defaults(); |
|
|
|
// rover does not use arming nor pre-arm checks |
|
AP_Notify::flags.armed = true; |
|
AP_Notify::flags.pre_arm_check = true; |
|
AP_Notify::flags.failsafe_battery = false; |
|
|
|
notify.init(); |
|
|
|
rssi_analog_source = hal.analogin->channel(ANALOG_INPUT_NONE); |
|
vcc_pin = hal.analogin->channel(ANALOG_INPUT_BOARD_VCC); |
|
batt_volt_pin = hal.analogin->channel(g.battery_volt_pin); |
|
batt_curr_pin = hal.analogin->channel(g.battery_curr_pin); |
|
|
|
init_ardupilot(); |
|
|
|
// initialise the main loop scheduler |
|
scheduler.init(&scheduler_tasks[0], sizeof(scheduler_tasks)/sizeof(scheduler_tasks[0])); |
|
} |
|
|
|
/* |
|
loop() is called rapidly while the sketch is running |
|
*/ |
|
void loop() |
|
{ |
|
uint32_t timer = millis(); |
|
|
|
// We want this to execute at 50Hz, but synchronised with the gyro/accel |
|
uint16_t num_samples = ins.num_samples_available(); |
|
if (num_samples >= 1) { |
|
delta_ms_fast_loop = timer - fast_loopTimer; |
|
G_Dt = (float)delta_ms_fast_loop / 1000.f; |
|
fast_loopTimer = timer; |
|
|
|
mainLoop_count++; |
|
|
|
// Execute the fast loop |
|
// --------------------- |
|
fast_loop(); |
|
|
|
// tell the scheduler one tick has passed |
|
scheduler.tick(); |
|
fast_loopTimeStamp = millis(); |
|
|
|
scheduler.run(19000U); |
|
} |
|
} |
|
|
|
// Main loop 50Hz |
|
static void fast_loop() |
|
{ |
|
// This is the fast loop - we want it to execute at 50Hz if possible |
|
// ----------------------------------------------------------------- |
|
if (delta_ms_fast_loop > G_Dt_max) |
|
G_Dt_max = delta_ms_fast_loop; |
|
|
|
// Read radio |
|
// ---------- |
|
read_radio(); |
|
|
|
// try to send any deferred messages if the serial port now has |
|
// some space available |
|
gcs_send_message(MSG_RETRY_DEFERRED); |
|
|
|
#if HIL_MODE != HIL_MODE_DISABLED |
|
// update hil before dcm update |
|
gcs_update(); |
|
#endif |
|
|
|
ahrs.update(); |
|
|
|
read_sonars(); |
|
|
|
if (g.log_bitmask & MASK_LOG_ATTITUDE_FAST) |
|
Log_Write_Attitude(); |
|
|
|
if (g.log_bitmask & MASK_LOG_IMU) |
|
DataFlash.Log_Write_IMU(&ins); |
|
|
|
// custom code/exceptions for flight modes |
|
// --------------------------------------- |
|
update_current_mode(); |
|
|
|
// write out the servo PWM values |
|
// ------------------------------ |
|
set_servos(); |
|
|
|
gcs_update(); |
|
gcs_data_stream_send(); |
|
} |
|
|
|
/* |
|
update camera mount - 50Hz |
|
*/ |
|
static void mount_update(void) |
|
{ |
|
#if MOUNT == ENABLED |
|
camera_mount.update_mount_position(); |
|
#endif |
|
#if CAMERA == ENABLED |
|
camera.trigger_pic_cleanup(); |
|
#endif |
|
} |
|
|
|
/* |
|
check for GCS failsafe - 10Hz |
|
*/ |
|
static void failsafe_check(void) |
|
{ |
|
if (g.fs_gcs_enabled) { |
|
failsafe_trigger(FAILSAFE_EVENT_GCS, last_heartbeat_ms != 0 && (millis() - last_heartbeat_ms) > 2000); |
|
} |
|
} |
|
|
|
/* |
|
if the compass is enabled then try to accumulate a reading |
|
*/ |
|
static void compass_accumulate(void) |
|
{ |
|
if (g.compass_enabled) { |
|
compass.accumulate(); |
|
} |
|
} |
|
|
|
/* |
|
check for new compass data - 10Hz |
|
*/ |
|
static void update_compass(void) |
|
{ |
|
if (g.compass_enabled && compass.read()) { |
|
ahrs.set_compass(&compass); |
|
// update offsets |
|
compass.null_offsets(); |
|
if (g.log_bitmask & MASK_LOG_COMPASS) { |
|
Log_Write_Compass(); |
|
} |
|
} else { |
|
ahrs.set_compass(NULL); |
|
} |
|
} |
|
|
|
/* |
|
log some key data - 10Hz |
|
*/ |
|
static void update_logging(void) |
|
{ |
|
if ((g.log_bitmask & MASK_LOG_ATTITUDE_MED) && !(g.log_bitmask & MASK_LOG_ATTITUDE_FAST)) |
|
Log_Write_Attitude(); |
|
|
|
if (g.log_bitmask & MASK_LOG_CTUN) |
|
Log_Write_Control_Tuning(); |
|
|
|
if (g.log_bitmask & MASK_LOG_NTUN) |
|
Log_Write_Nav_Tuning(); |
|
} |
|
|
|
|
|
/* |
|
update aux servo mappings |
|
*/ |
|
static void update_aux(void) |
|
{ |
|
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4 |
|
update_aux_servo_function(&g.rc_5, &g.rc_6, &g.rc_7, &g.rc_8, &g.rc_9, &g.rc_10, &g.rc_11, &g.rc_12); |
|
#elif CONFIG_HAL_BOARD == HAL_BOARD_APM2 |
|
update_aux_servo_function(&g.rc_5, &g.rc_6, &g.rc_7, &g.rc_8, &g.rc_10, &g.rc_11); |
|
#else |
|
update_aux_servo_function(&g.rc_5, &g.rc_6, &g.rc_7, &g.rc_8); |
|
#endif |
|
enable_aux_servos(); |
|
|
|
#if MOUNT == ENABLED |
|
camera_mount.update_mount_type(); |
|
#endif |
|
} |
|
|
|
/* |
|
once a second events |
|
*/ |
|
static void one_second_loop(void) |
|
{ |
|
if (g.log_bitmask & MASK_LOG_CURRENT) |
|
Log_Write_Current(); |
|
// send a heartbeat |
|
gcs_send_message(MSG_HEARTBEAT); |
|
|
|
// allow orientation change at runtime to aid config |
|
ahrs.set_orientation(); |
|
|
|
set_control_channels(); |
|
|
|
// cope with changes to aux functions |
|
update_aux(); |
|
|
|
#if MOUNT == ENABLED |
|
camera_mount.update_mount_type(); |
|
#endif |
|
|
|
// cope with changes to mavlink system ID |
|
mavlink_system.sysid = g.sysid_this_mav; |
|
|
|
static uint8_t counter; |
|
|
|
counter++; |
|
|
|
// write perf data every 20s |
|
if (counter == 20) { |
|
if (g.log_bitmask & MASK_LOG_PM) |
|
Log_Write_Performance(); |
|
resetPerfData(); |
|
} |
|
|
|
// save compass offsets once a minute |
|
if (counter >= 60) { |
|
if (g.compass_enabled) { |
|
compass.save_offsets(); |
|
} |
|
counter = 0; |
|
} |
|
} |
|
|
|
static void update_GPS(void) |
|
{ |
|
static uint32_t last_gps_reading; |
|
g_gps->update(); |
|
|
|
if (g_gps->last_message_time_ms() != last_gps_reading) { |
|
last_gps_reading = g_gps->last_message_time_ms(); |
|
if (g.log_bitmask & MASK_LOG_GPS) { |
|
DataFlash.Log_Write_GPS(g_gps, current_loc.alt); |
|
} |
|
} |
|
|
|
have_position = ahrs.get_projected_position(current_loc); |
|
|
|
if (g_gps->new_data && g_gps->status() >= GPS::GPS_OK_FIX_3D) { |
|
gps_fix_count++; |
|
|
|
if(ground_start_count > 1){ |
|
ground_start_count--; |
|
ground_start_avg += g_gps->ground_speed_cm; |
|
|
|
} else if (ground_start_count == 1) { |
|
// We countdown N number of good GPS fixes |
|
// so that the altitude is more accurate |
|
// ------------------------------------- |
|
if (current_loc.lat == 0) { |
|
ground_start_count = 5; |
|
|
|
} else { |
|
init_home(); |
|
if (g.compass_enabled) { |
|
// Set compass declination automatically |
|
compass.set_initial_location(g_gps->latitude, g_gps->longitude); |
|
} |
|
ground_start_count = 0; |
|
} |
|
} |
|
ground_speed = g_gps->ground_speed_cm * 0.01; |
|
|
|
#if CAMERA == ENABLED |
|
if (camera.update_location(current_loc) == true) { |
|
do_take_picture(); |
|
} |
|
#endif |
|
} |
|
} |
|
|
|
static void update_current_mode(void) |
|
{ |
|
switch (control_mode){ |
|
case AUTO: |
|
case RTL: |
|
case GUIDED: |
|
calc_lateral_acceleration(); |
|
calc_nav_steer(); |
|
calc_throttle(g.speed_cruise); |
|
break; |
|
|
|
case STEERING: { |
|
/* |
|
in steering mode we control lateral acceleration directly |
|
*/ |
|
lateral_acceleration = g.turn_max_g * GRAVITY_MSS * (channel_steer->pwm_to_angle()/4500.0f); |
|
calc_nav_steer(); |
|
|
|
// and throttle gives speed in proportion to cruise speed |
|
throttle_nudge = 0; |
|
calc_throttle(channel_throttle->pwm_to_angle() * 0.01 * g.speed_cruise); |
|
break; |
|
} |
|
|
|
case LEARNING: |
|
case MANUAL: |
|
/* |
|
in both MANUAL and LEARNING we pass through the |
|
controls. Setting servo_out here actually doesn't matter, as |
|
we set the exact value in set_servos(), but it helps for |
|
logging |
|
*/ |
|
channel_throttle->servo_out = channel_throttle->control_in; |
|
channel_steer->servo_out = channel_steer->pwm_to_angle(); |
|
break; |
|
|
|
case HOLD: |
|
// hold position - stop motors and center steering |
|
channel_throttle->servo_out = 0; |
|
channel_steer->servo_out = 0; |
|
break; |
|
|
|
case INITIALISING: |
|
break; |
|
} |
|
} |
|
|
|
static void update_navigation() |
|
{ |
|
switch (control_mode) { |
|
case MANUAL: |
|
case HOLD: |
|
case LEARNING: |
|
case STEERING: |
|
case INITIALISING: |
|
break; |
|
|
|
case AUTO: |
|
verify_commands(); |
|
break; |
|
|
|
case RTL: |
|
case GUIDED: |
|
// no loitering around the wp with the rover, goes direct to the wp position |
|
calc_lateral_acceleration(); |
|
calc_nav_steer(); |
|
if (verify_RTL()) { |
|
channel_throttle->servo_out = g.throttle_min.get(); |
|
set_mode(HOLD); |
|
} |
|
break; |
|
} |
|
} |
|
|
|
AP_HAL_MAIN();
|
|
|