zr-v4/libraries/AP_HAL_PX4/Scheduler.cpp

#include <AP_HAL/AP_HAL.h>
#if CONFIG_HAL_BOARD == HAL_BOARD_PX4

#include "AP_HAL_PX4.h"
#include "Scheduler.h"

#include <unistd.h>
#include <stdlib.h>
#include <sched.h>
#include <errno.h>
#include <stdio.h>
#include <drivers/drv_hrt.h>
#include <nuttx/arch.h>
#include <systemlib/systemlib.h>
#include <pthread.h>
#include <poll.h>

#include "UARTDriver.h"
#include "AnalogIn.h"
#include "Storage.h"
#include "RCOutput.h"
#include "RCInput.h"

#include <AP_Scheduler/AP_Scheduler.h>
#include <AP_BoardConfig/AP_BoardConfig.h>

using namespace PX4;

extern const AP_HAL::HAL& hal;

extern bool _px4_thread_should_exit;

PX4Scheduler::PX4Scheduler() :
    _perf_timers(perf_alloc(PC_ELAPSED, "APM_timers")),
    _perf_io_timers(perf_alloc(PC_ELAPSED, "APM_IO_timers")),
    _perf_storage_timer(perf_alloc(PC_ELAPSED, "APM_storage_timers")),
    _perf_delay(perf_alloc(PC_ELAPSED, "APM_delay"))
{}

void PX4Scheduler::init()
{
    _main_task_pid = getpid();

    // setup the timer thread - this will call tasks at 1kHz
    pthread_attr_t thread_attr;
    struct sched_param param;

    pthread_attr_init(&thread_attr);
    pthread_attr_setstacksize(&thread_attr, 2048);

    param.sched_priority = APM_TIMER_PRIORITY;
    (void)pthread_attr_setschedparam(&thread_attr, &param);
    pthread_attr_setschedpolicy(&thread_attr, SCHED_FIFO);

    pthread_create(&_timer_thread_ctx, &thread_attr, &PX4Scheduler::_timer_thread, this);

    // the UART thread runs at a medium priority
    pthread_attr_init(&thread_attr);
    pthread_attr_setstacksize(&thread_attr, 2048);

    param.sched_priority = APM_UART_PRIORITY;
    (void)pthread_attr_setschedparam(&thread_attr, &param);
    pthread_attr_setschedpolicy(&thread_attr, SCHED_FIFO);

    pthread_create(&_uart_thread_ctx, &thread_attr, &PX4Scheduler::_uart_thread, this);

    // the IO thread runs at lower priority
    pthread_attr_init(&thread_attr);
    pthread_attr_setstacksize(&thread_attr, 2048);

    param.sched_priority = APM_IO_PRIORITY;
    (void)pthread_attr_setschedparam(&thread_attr, &param);
    pthread_attr_setschedpolicy(&thread_attr, SCHED_FIFO);

    pthread_create(&_io_thread_ctx, &thread_attr, &PX4Scheduler::_io_thread, this);

    // the storage thread runs at just above IO priority
    pthread_attr_init(&thread_attr);
    pthread_attr_setstacksize(&thread_attr, 1024);

    param.sched_priority = APM_STORAGE_PRIORITY;
    (void)pthread_attr_setschedparam(&thread_attr, &param);
    pthread_attr_setschedpolicy(&thread_attr, SCHED_FIFO);

    pthread_create(&_storage_thread_ctx, &thread_attr, &PX4Scheduler::_storage_thread, this);
}

/**
   delay for a specified number of microseconds using a semaphore wait
 */
void PX4Scheduler::delay_microseconds_semaphore(uint16_t usec)
{
    sem_t wait_semaphore;
    struct hrt_call wait_call;
    sem_init(&wait_semaphore, 0, 0);
    memset(&wait_call, 0, sizeof(wait_call));
    hrt_call_after(&wait_call, usec, (hrt_callout)sem_post, &wait_semaphore);
    sem_wait(&wait_semaphore);
}

void PX4Scheduler::delay_microseconds(uint16_t usec)
{
    perf_begin(_perf_delay);
    delay_microseconds_semaphore(usec);
    perf_end(_perf_delay);
}

/*
  wrapper around sem_post that boosts main thread priority
 */
static void sem_post_boost(sem_t *sem)
{
    hal_px4_set_priority(APM_MAIN_PRIORITY_BOOST);
    sem_post(sem);
}

/*
  return the main thread to normal priority
 */
static void set_normal_priority(void *sem)
{
    hal_px4_set_priority(APM_MAIN_PRIORITY);
}

/*
  a variant of delay_microseconds that boosts priority to
  APM_MAIN_PRIORITY_BOOST for APM_MAIN_PRIORITY_BOOST_USEC
  microseconds when the time completes. This significantly improves
  the regularity of timing of the main loop as it takes
 */
void PX4Scheduler::delay_microseconds_boost(uint16_t usec)
{
    sem_t wait_semaphore;
    static struct hrt_call wait_call;
    sem_init(&wait_semaphore, 0, 0);
    hrt_call_after(&wait_call, usec, (hrt_callout)sem_post_boost, &wait_semaphore);
    sem_wait(&wait_semaphore);
    hrt_call_after(&wait_call, APM_MAIN_PRIORITY_BOOST_USEC, (hrt_callout)set_normal_priority, nullptr);
}

void PX4Scheduler::delay(uint16_t ms)
{
    perf_begin(_perf_delay);
    uint64_t start = AP_HAL::micros64();

    while ((AP_HAL::micros64() - start)/1000 < ms &&
           !_px4_thread_should_exit) {
        delay_microseconds_semaphore(1000);
        if (in_main_thread() && _min_delay_cb_ms <= ms) {
            call_delay_cb();
        }
    }
    perf_end(_perf_delay);
    if (_px4_thread_should_exit) {
        exit(1);
    }
}

void PX4Scheduler::register_timer_process(AP_HAL::MemberProc proc)
{
    for (uint8_t i = 0; i < _num_timer_procs; i++) {
        if (_timer_proc[i] == proc) {
            return;
        }
    }

    if (_num_timer_procs < PX4_SCHEDULER_MAX_TIMER_PROCS) {
        _timer_proc[_num_timer_procs] = proc;
        _num_timer_procs++;
    } else {
        hal.console->printf("Out of timer processes\n");
    }
}

void PX4Scheduler::register_io_process(AP_HAL::MemberProc proc)
{
    for (uint8_t i = 0; i < _num_io_procs; i++) {
        if (_io_proc[i] == proc) {
            return;
        }
    }

    if (_num_io_procs < PX4_SCHEDULER_MAX_TIMER_PROCS) {
        _io_proc[_num_io_procs] = proc;
        _num_io_procs++;
    } else {
        hal.console->printf("Out of IO processes\n");
    }
}

void PX4Scheduler::register_timer_failsafe(AP_HAL::Proc failsafe, uint32_t period_us)
{
    _failsafe = failsafe;
}

void PX4Scheduler::reboot(bool hold_in_bootloader)
{
    // disarm motors to ensure they are off during a bootloader upload
    hal.rcout->force_safety_on();
    hal.rcout->force_safety_no_wait();

    // delay to ensure the async force_saftey operation completes
    delay(500);

    px4_systemreset(hold_in_bootloader);
}

void PX4Scheduler::_run_timers()
{
    if (_in_timer_proc) {
        return;
    }
    _in_timer_proc = true;

    // now call the timer based drivers
    for (int i = 0; i < _num_timer_procs; i++) {
        if (_timer_proc[i]) {
            _timer_proc[i]();
        }
    }

    // and the failsafe, if one is setup
    if (_failsafe != nullptr) {
        _failsafe();
    }

    // process analog input
    ((PX4AnalogIn *)hal.analogin)->_timer_tick();

    _in_timer_proc = false;
}

extern bool px4_ran_overtime;

void *PX4Scheduler::_timer_thread(void *arg)
{
    PX4Scheduler *sched = (PX4Scheduler *)arg;
    uint32_t last_ran_overtime = 0;

    pthread_setname_np(pthread_self(), "apm_timer");

    while (!sched->_hal_initialized) {
        poll(nullptr, 0, 1);
    }
    while (!_px4_thread_should_exit) {
        sched->delay_microseconds_semaphore(1000);

        // run registered timers
        perf_begin(sched->_perf_timers);
        sched->_run_timers();
        perf_end(sched->_perf_timers);

        // process any pending RC output requests
        hal.rcout->timer_tick();

        // process any pending RC input requests
        ((PX4RCInput *)hal.rcin)->_timer_tick();

        if (px4_ran_overtime && AP_HAL::millis() - last_ran_overtime > 2000) {
            last_ran_overtime = AP_HAL::millis();
#if 0
            printf("Overtime in task %d\n", (int)AP_Scheduler::current_task);
            hal.console->printf("Overtime in task %d\n", (int)AP_Scheduler::current_task);
#endif
        }
    }
    return nullptr;
}

void PX4Scheduler::_run_io(void)
{
    if (_in_io_proc) {
        return;
    }
    _in_io_proc = true;

    // now call the IO based drivers
    for (int i = 0; i < _num_io_procs; i++) {
        if (_io_proc[i]) {
            _io_proc[i]();
        }
    }

    _in_io_proc = false;
}

void *PX4Scheduler::_uart_thread(void *arg)
{
    PX4Scheduler *sched = (PX4Scheduler *)arg;

    pthread_setname_np(pthread_self(), "apm_uart");

    while (!sched->_hal_initialized) {
        poll(nullptr, 0, 1);
    }
    while (!_px4_thread_should_exit) {
        sched->delay_microseconds_semaphore(1000);

        // process any pending serial bytes
        hal.uartA->_timer_tick();
        hal.uartB->_timer_tick();
        hal.uartC->_timer_tick();
        hal.uartD->_timer_tick();
        hal.uartE->_timer_tick();
        hal.uartF->_timer_tick();
    }
    return nullptr;
}

void *PX4Scheduler::_io_thread(void *arg)
{
    PX4Scheduler *sched = (PX4Scheduler *)arg;

    pthread_setname_np(pthread_self(), "apm_io");

    while (!sched->_hal_initialized) {
        poll(nullptr, 0, 1);
    }
    while (!_px4_thread_should_exit) {
        sched->delay_microseconds_semaphore(1000);

        // run registered IO processes
        perf_begin(sched->_perf_io_timers);
        sched->_run_io();
        perf_end(sched->_perf_io_timers);
    }
    return nullptr;
}

void *PX4Scheduler::_storage_thread(void *arg)
{
    PX4Scheduler *sched = (PX4Scheduler *)arg;

    pthread_setname_np(pthread_self(), "apm_storage");

    while (!sched->_hal_initialized) {
        poll(nullptr, 0, 1);
    }
    while (!_px4_thread_should_exit) {
        sched->delay_microseconds_semaphore(10000);

        // process any pending storage writes
        perf_begin(sched->_perf_storage_timer);
        hal.storage->_timer_tick();
        perf_end(sched->_perf_storage_timer);
    }
    return nullptr;
}

bool PX4Scheduler::in_main_thread() const
{
    return getpid() == _main_task_pid;
}

void PX4Scheduler::system_initialized()
{
    if (_initialized) {
        AP_HAL::panic("PANIC: scheduler::system_initialized called"
                      "more than once");
    }
    _initialized = true;
}


/*
  disable interrupts and return a context that can be used to
  restore the interrupt state. This can be used to protect
  critical regions
*/
void *PX4Scheduler::disable_interrupts_save(void)
{
    return (void *)(uintptr_t)irqsave();
}

/*
  restore interrupt state from disable_interrupts_save()
*/
void PX4Scheduler::restore_interrupts(void *state)
{
    irqrestore((irqstate_t)(uintptr_t)state);
}

/*
  trampoline for thread create
*/
void *PX4Scheduler::thread_create_trampoline(void *ctx)
{
    AP_HAL::MemberProc *t = (AP_HAL::MemberProc *)ctx;
    (*t)();
    free(t);
    return nullptr;
}

/*
  create a new thread
*/
bool PX4Scheduler::thread_create(AP_HAL::MemberProc proc, const char *name, uint32_t stack_size, priority_base base, int8_t priority)
{
    // take a copy of the MemberProc, it is freed after thread exits
    AP_HAL::MemberProc *tproc = (AP_HAL::MemberProc *)malloc(sizeof(proc));
    if (!tproc) {
        return false;
    }
    *tproc = proc;

    uint8_t thread_priority = APM_IO_PRIORITY;
    static const struct {
        priority_base base;
        uint8_t p;
    } priority_map[] = {
        { PRIORITY_BOOST, APM_MAIN_PRIORITY_BOOST},
        { PRIORITY_MAIN, APM_MAIN_PRIORITY},
        { PRIORITY_SPI, APM_SPI_PRIORITY},
        { PRIORITY_I2C, APM_I2C_PRIORITY},
        { PRIORITY_CAN, APM_CAN_PRIORITY},
        { PRIORITY_TIMER, APM_TIMER_PRIORITY},
        { PRIORITY_RCIN, APM_TIMER_PRIORITY},
        { PRIORITY_IO, APM_IO_PRIORITY},
        { PRIORITY_UART, APM_UART_PRIORITY},
        { PRIORITY_STORAGE, APM_STORAGE_PRIORITY},
        { PRIORITY_SCRIPTING, APM_SCRIPTING_PRIORITY},
    };
    for (uint8_t i=0; i<ARRAY_SIZE(priority_map); i++) {
        if (priority_map[i].base == base) {
            thread_priority = constrain_int16(priority_map[i].p + priority, 1, APM_MAX_PRIORITY);
            break;
        }
    }
    pthread_t thread;
    pthread_attr_t thread_attr;
    struct sched_param param;

    pthread_attr_init(&thread_attr);
    pthread_attr_setstacksize(&thread_attr, stack_size);

    param.sched_priority = thread_priority;
    (void)pthread_attr_setschedparam(&thread_attr, &param);
    pthread_attr_setschedpolicy(&thread_attr, SCHED_FIFO);

    if (pthread_create(&thread, &thread_attr, thread_create_trampoline, tproc) != 0) {
        free(tproc);
        return false;
    }
    pthread_setname_np(thread, name);
    return true;
}

#endif