You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
287 lines
12 KiB
287 lines
12 KiB
#include "AC_AttitudeControl_Multi.h" |
|
#include <AP_HAL/AP_HAL.h> |
|
#include <AP_Math/AP_Math.h> |
|
|
|
// table of user settable parameters |
|
const AP_Param::GroupInfo AC_AttitudeControl_Multi::var_info[] = { |
|
// parameters from parent vehicle |
|
AP_NESTEDGROUPINFO(AC_AttitudeControl, 0), |
|
|
|
// @Param: RAT_RLL_P |
|
// @DisplayName: Roll axis rate controller P gain |
|
// @Description: Roll axis rate controller P gain. Converts the difference between desired roll rate and actual roll rate into a motor speed output |
|
// @Range: 0.08 0.30 |
|
// @Increment: 0.005 |
|
// @User: Standard |
|
|
|
// @Param: RAT_RLL_I |
|
// @DisplayName: Roll axis rate controller I gain |
|
// @Description: Roll axis rate controller I gain. Corrects long-term difference in desired roll rate vs actual roll rate |
|
// @Range: 0.01 0.5 |
|
// @Increment: 0.01 |
|
// @User: Standard |
|
|
|
// @Param: RAT_RLL_IMAX |
|
// @DisplayName: Roll axis rate controller I gain maximum |
|
// @Description: Roll axis rate controller I gain maximum. Constrains the maximum motor output that the I gain will output |
|
// @Range: 0 1 |
|
// @Increment: 0.01 |
|
// @Units: % |
|
// @User: Standard |
|
|
|
// @Param: RAT_RLL_D |
|
// @DisplayName: Roll axis rate controller D gain |
|
// @Description: Roll axis rate controller D gain. Compensates for short-term change in desired roll rate vs actual roll rate |
|
// @Range: 0.0 0.02 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_RLL_FF |
|
// @DisplayName: Roll axis rate controller feed forward |
|
// @Description: Roll axis rate controller feed forward |
|
// @Range: 0 0.5 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_RLL_FILT |
|
// @DisplayName: Roll axis rate controller input frequency in Hz |
|
// @Description: Roll axis rate controller input frequency in Hz |
|
// @Range: 1 100 |
|
// @Increment: 1 |
|
// @Units: Hz |
|
// @User: Standard |
|
AP_SUBGROUPINFO(_pid_rate_roll, "RAT_RLL_", 1, AC_AttitudeControl_Multi, AC_PID), |
|
|
|
// @Param: RAT_PIT_P |
|
// @DisplayName: Pitch axis rate controller P gain |
|
// @Description: Pitch axis rate controller P gain. Converts the difference between desired pitch rate and actual pitch rate into a motor speed output |
|
// @Range: 0.08 0.30 |
|
// @Increment: 0.005 |
|
// @User: Standard |
|
|
|
// @Param: RAT_PIT_I |
|
// @DisplayName: Pitch axis rate controller I gain |
|
// @Description: Pitch axis rate controller I gain. Corrects long-term difference in desired pitch rate vs actual pitch rate |
|
// @Range: 0.01 0.5 |
|
// @Increment: 0.01 |
|
// @User: Standard |
|
|
|
// @Param: RAT_PIT_IMAX |
|
// @DisplayName: Pitch axis rate controller I gain maximum |
|
// @Description: Pitch axis rate controller I gain maximum. Constrains the maximum motor output that the I gain will output |
|
// @Range: 0 1 |
|
// @Increment: 0.01 |
|
// @Units: % |
|
// @User: Standard |
|
|
|
// @Param: RAT_PIT_D |
|
// @DisplayName: Pitch axis rate controller D gain |
|
// @Description: Pitch axis rate controller D gain. Compensates for short-term change in desired pitch rate vs actual pitch rate |
|
// @Range: 0.0 0.02 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_PIT_FF |
|
// @DisplayName: Pitch axis rate controller feed forward |
|
// @Description: Pitch axis rate controller feed forward |
|
// @Range: 0 0.5 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_PIT_FILT |
|
// @DisplayName: Pitch axis rate controller input frequency in Hz |
|
// @Description: Pitch axis rate controller input frequency in Hz |
|
// @Range: 1 100 |
|
// @Increment: 1 |
|
// @Units: Hz |
|
// @User: Standard |
|
AP_SUBGROUPINFO(_pid_rate_pitch, "RAT_PIT_", 2, AC_AttitudeControl_Multi, AC_PID), |
|
|
|
// @Param: RAT_YAW_P |
|
// @DisplayName: Yaw axis rate controller P gain |
|
// @Description: Yaw axis rate controller P gain. Converts the difference between desired yaw rate and actual yaw rate into a motor speed output |
|
// @Range: 0.10 0.50 |
|
// @Increment: 0.005 |
|
// @User: Standard |
|
|
|
// @Param: RAT_YAW_I |
|
// @DisplayName: Yaw axis rate controller I gain |
|
// @Description: Yaw axis rate controller I gain. Corrects long-term difference in desired yaw rate vs actual yaw rate |
|
// @Range: 0.010 0.05 |
|
// @Increment: 0.01 |
|
// @User: Standard |
|
|
|
// @Param: RAT_YAW_IMAX |
|
// @DisplayName: Yaw axis rate controller I gain maximum |
|
// @Description: Yaw axis rate controller I gain maximum. Constrains the maximum motor output that the I gain will output |
|
// @Range: 0 1 |
|
// @Increment: 0.01 |
|
// @Units: % |
|
// @User: Standard |
|
|
|
// @Param: RAT_YAW_D |
|
// @DisplayName: Yaw axis rate controller D gain |
|
// @Description: Yaw axis rate controller D gain. Compensates for short-term change in desired yaw rate vs actual yaw rate |
|
// @Range: 0.000 0.02 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_YAW_FF |
|
// @DisplayName: Yaw axis rate controller feed forward |
|
// @Description: Yaw axis rate controller feed forward |
|
// @Range: 0 0.5 |
|
// @Increment: 0.001 |
|
// @User: Standard |
|
|
|
// @Param: RAT_YAW_FILT |
|
// @DisplayName: Yaw axis rate controller input frequency in Hz |
|
// @Description: Yaw axis rate controller input frequency in Hz |
|
// @Range: 1 100 |
|
// @Increment: 1 |
|
// @Units: Hz |
|
// @User: Standard |
|
AP_SUBGROUPINFO(_pid_rate_yaw, "RAT_YAW_", 3, AC_AttitudeControl_Multi, AC_PID), |
|
|
|
// @Param: THR_MIX_MIN |
|
// @DisplayName: Throttle Mix Minimum |
|
// @Description: Throttle vs attitude control prioritisation used when landing (higher values mean we prioritise attitude control over throttle) |
|
// @Range: 0.1 0.25 |
|
// @User: Advanced |
|
AP_GROUPINFO("THR_MIX_MIN", 4, AC_AttitudeControl_Multi, _thr_mix_min, AC_ATTITUDE_CONTROL_MIN_DEFAULT), |
|
|
|
// @Param: THR_MIX_MAX |
|
// @DisplayName: Throttle Mix Maximum |
|
// @Description: Throttle vs attitude control prioritisation used during active flight (higher values mean we prioritise attitude control over throttle) |
|
// @Range: 0.5 0.9 |
|
// @User: Advanced |
|
AP_GROUPINFO("THR_MIX_MAX", 5, AC_AttitudeControl_Multi, _thr_mix_max, AC_ATTITUDE_CONTROL_MAX_DEFAULT), |
|
|
|
// @Param: THR_MIX_MAN |
|
// @DisplayName: Throttle Mix Manual |
|
// @Description: Throttle vs attitude control prioritisation used during manual flight (higher values mean we prioritise attitude control over throttle) |
|
// @Range: 0.5 0.9 |
|
// @User: Advanced |
|
AP_GROUPINFO("THR_MIX_MAN", 6, AC_AttitudeControl_Multi, _thr_mix_man, AC_ATTITUDE_CONTROL_MAN_DEFAULT), |
|
|
|
AP_GROUPEND |
|
}; |
|
|
|
AC_AttitudeControl_Multi::AC_AttitudeControl_Multi(AP_AHRS_View &ahrs, const AP_Vehicle::MultiCopter &aparm, AP_MotorsMulticopter& motors, float dt) : |
|
AC_AttitudeControl(ahrs, aparm, motors, dt), |
|
_motors_multi(motors), |
|
_pid_rate_roll(AC_ATC_MULTI_RATE_RP_P, AC_ATC_MULTI_RATE_RP_I, AC_ATC_MULTI_RATE_RP_D, AC_ATC_MULTI_RATE_RP_IMAX, AC_ATC_MULTI_RATE_RP_FILT_HZ, dt), |
|
_pid_rate_pitch(AC_ATC_MULTI_RATE_RP_P, AC_ATC_MULTI_RATE_RP_I, AC_ATC_MULTI_RATE_RP_D, AC_ATC_MULTI_RATE_RP_IMAX, AC_ATC_MULTI_RATE_RP_FILT_HZ, dt), |
|
_pid_rate_yaw(AC_ATC_MULTI_RATE_YAW_P, AC_ATC_MULTI_RATE_YAW_I, AC_ATC_MULTI_RATE_YAW_D, AC_ATC_MULTI_RATE_YAW_IMAX, AC_ATC_MULTI_RATE_YAW_FILT_HZ, dt) |
|
{ |
|
AP_Param::setup_object_defaults(this, var_info); |
|
} |
|
|
|
// Update Alt_Hold angle maximum |
|
void AC_AttitudeControl_Multi::update_althold_lean_angle_max(float throttle_in) |
|
{ |
|
// calc maximum tilt angle based on throttle |
|
float thr_max = _motors_multi.get_throttle_thrust_max(); |
|
|
|
// divide by zero check |
|
if (is_zero(thr_max)) { |
|
_althold_lean_angle_max = 0.0f; |
|
return; |
|
} |
|
|
|
float althold_lean_angle_max = acos(constrain_float(_throttle_in/(AC_ATTITUDE_CONTROL_ANGLE_LIMIT_THROTTLE_MAX * thr_max), 0.0f, 1.0f)); |
|
_althold_lean_angle_max = _althold_lean_angle_max + (_dt/(_dt+_angle_limit_tc))*(althold_lean_angle_max-_althold_lean_angle_max); |
|
} |
|
|
|
void AC_AttitudeControl_Multi::set_throttle_out(float throttle_in, bool apply_angle_boost, float filter_cutoff) |
|
{ |
|
_throttle_in = throttle_in; |
|
update_althold_lean_angle_max(throttle_in); |
|
_motors.set_throttle_filter_cutoff(filter_cutoff); |
|
if (apply_angle_boost) { |
|
// Apply angle boost |
|
throttle_in = get_throttle_boosted(throttle_in); |
|
}else{ |
|
// Clear angle_boost for logging purposes |
|
_angle_boost = 0.0f; |
|
} |
|
_motors.set_throttle(throttle_in); |
|
_motors.set_throttle_avg_max(get_throttle_avg_max(MAX(throttle_in, _throttle_in))); |
|
} |
|
|
|
// returns a throttle including compensation for roll/pitch angle |
|
// throttle value should be 0 ~ 1 |
|
float AC_AttitudeControl_Multi::get_throttle_boosted(float throttle_in) |
|
{ |
|
if (!_angle_boost_enabled) { |
|
_angle_boost = 0; |
|
return throttle_in; |
|
} |
|
// inverted_factor is 1 for tilt angles below 60 degrees |
|
// inverted_factor reduces from 1 to 0 for tilt angles between 60 and 90 degrees |
|
|
|
float cos_tilt = _ahrs.cos_pitch() * _ahrs.cos_roll(); |
|
float inverted_factor = constrain_float(2.0f*cos_tilt, 0.0f, 1.0f); |
|
float boost_factor = 1.0f/constrain_float(cos_tilt, 0.5f, 1.0f); |
|
|
|
float throttle_out = throttle_in*inverted_factor*boost_factor; |
|
_angle_boost = constrain_float(throttle_out - throttle_in,-1.0f,1.0f); |
|
return throttle_out; |
|
} |
|
|
|
// returns a throttle including compensation for roll/pitch angle |
|
// throttle value should be 0 ~ 1 |
|
float AC_AttitudeControl_Multi::get_throttle_avg_max(float throttle_in) |
|
{ |
|
throttle_in = constrain_float(throttle_in, 0.0f, 1.0f); |
|
return MAX(throttle_in, throttle_in*MAX(0.0f,1.0f-_throttle_rpy_mix)+_motors.get_throttle_hover()*_throttle_rpy_mix); |
|
} |
|
|
|
// update_throttle_rpy_mix - slew set_throttle_rpy_mix to requested value |
|
void AC_AttitudeControl_Multi::update_throttle_rpy_mix() |
|
{ |
|
// slew _throttle_rpy_mix to _throttle_rpy_mix_desired |
|
if (_throttle_rpy_mix < _throttle_rpy_mix_desired) { |
|
// increase quickly (i.e. from 0.1 to 0.9 in 0.4 seconds) |
|
_throttle_rpy_mix += MIN(2.0f*_dt, _throttle_rpy_mix_desired-_throttle_rpy_mix); |
|
} else if (_throttle_rpy_mix > _throttle_rpy_mix_desired) { |
|
// reduce more slowly (from 0.9 to 0.1 in 1.6 seconds) |
|
_throttle_rpy_mix -= MIN(0.5f*_dt, _throttle_rpy_mix-_throttle_rpy_mix_desired); |
|
} |
|
_throttle_rpy_mix = constrain_float(_throttle_rpy_mix, 0.1f, AC_ATTITUDE_CONTROL_MAX); |
|
} |
|
|
|
void AC_AttitudeControl_Multi::rate_controller_run() |
|
{ |
|
// move throttle vs attitude mixing towards desired (called from here because this is conveniently called on every iteration) |
|
update_throttle_rpy_mix(); |
|
|
|
Vector3f gyro_latest = _ahrs.get_gyro_latest(); |
|
_motors.set_roll(rate_target_to_motor_roll(gyro_latest.x, _rate_target_ang_vel.x)); |
|
_motors.set_pitch(rate_target_to_motor_pitch(gyro_latest.y, _rate_target_ang_vel.y)); |
|
_motors.set_yaw(rate_target_to_motor_yaw(gyro_latest.z, _rate_target_ang_vel.z)); |
|
|
|
control_monitor_update(); |
|
} |
|
|
|
// sanity check parameters. should be called once before takeoff |
|
void AC_AttitudeControl_Multi::parameter_sanity_check() |
|
{ |
|
// sanity check throttle mix parameters |
|
if (_thr_mix_man < 0.1f || _thr_mix_man > 4.0f) { |
|
// parameter description recommends thr-mix-man be no higher than 0.9 but we allow up to 4.0 |
|
// which can be useful for very high powered copters with very low hover throttle |
|
_thr_mix_man.set_and_save(AC_ATTITUDE_CONTROL_MAN_DEFAULT); |
|
} |
|
if (_thr_mix_min < 0.1f || _thr_mix_min > 0.25f) { |
|
_thr_mix_min.set_and_save(AC_ATTITUDE_CONTROL_MIN_DEFAULT); |
|
} |
|
if (_thr_mix_max < 0.5f || _thr_mix_max > AC_ATTITUDE_CONTROL_MAX) { |
|
// parameter description recommends thr-mix-max be no higher than 0.9 but we allow up to 5.0 |
|
// which can be useful for very high powered copters with very low hover throttle |
|
_thr_mix_max.set_and_save(AC_ATTITUDE_CONTROL_MAX_DEFAULT); |
|
} |
|
if (_thr_mix_min > _thr_mix_max) { |
|
_thr_mix_min.set_and_save(AC_ATTITUDE_CONTROL_MIN_DEFAULT); |
|
_thr_mix_max.set_and_save(AC_ATTITUDE_CONTROL_MAX_DEFAULT); |
|
} |
|
}
|
|
|