You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Tree: ede920f293

c415-sdk

celiu-4.0

celiu-4.0.17-rc8

master

mission-4.1.18

zr-sdk-4.1.16

zr-sdk-4.3.1

zr-v4.1.17

zr-v5.0

zr-v5.1

Branches Tags

${ item.name }

Create tag ${ searchTerm }

Create branch ${ searchTerm }

from 'ede920f293'

${ noResults }

zr-v4/ArduPlane

History

Andrew Tridgell a0f69e06a7 Plane: prevent baro reset from OVERRIDE_CHAN ... using OVERRIDE_CHAN would cause a baro reset as it would mean we are temporarily disarmed, and the "reset baro and GPS when disarmed" check would reset the baro Now we only do the mixer update if disarmed		10 years ago
..
APM_Config.h	…
APM_Config.h.reference	…
ArduPlane.pde	Plane: mark development version 3.2.1alpha	10 years ago
Attitude.pde	Plane: use set_radio_trimmed() for flaperons	10 years ago
GCS_Mavlink.pde	Plane: if SKIP_GYRO_CAL is set the do a gyro cal on 3D accel cal	10 years ago
Log.pde	Plane: log raw pressure and offset	10 years ago
Makefile	…
Parameters.h	Plane: added STALL_PREVENTION option	10 years ago
Parameters.pde	Plane: small improvement to takeoff docs	10 years ago
altitude.pde	Plane: lowpass the rangefinder correction, not height	11 years ago
climb_rate.pde	…
command_description.txt	…
commands.pde	…
commands_logic.pde	Plane: fixed missing break statement	10 years ago
commands_process.pde	…
compat.h	…
compat.pde	Plane: removed unused function	10 years ago
config.h	Plane: added OVERRIDE_CHAN parameter	10 years ago
control_modes.pde	Plane: prevent baro reset from OVERRIDE_CHAN	10 years ago
createTags	…
defines.h	Plane: convert to using StorageManager	11 years ago
events.pde	ArduPlane: attempt to send GCS a message when the GCS heartbeat is not detected.	11 years ago
failsafe.pde	Plane: no need to set flaperons separately from flaperon_update()	10 years ago
geofence.pde	Plane: update for APM_OBC API change	11 years ago
landing.pde	Plane: fixed sense of landing sink rate calculation	10 years ago
navigation.pde	…
nocore.inoflag	…
px4_mixer.pde	Plane: fixed potential division by zero in mixing creation	10 years ago
radio.pde	Plane: setup pwm esc scaling	10 years ago
release-notes.txt	Plane: prepare for 3.2.0 release	10 years ago
sensors.pde	Plane: changed for new AP_Airspeed API	10 years ago
setup.pde	Plane: fixed CLI build again	10 years ago
system.pde	Plane: fix build with new mavlink repo	10 years ago
takeoff.pde	Plane: added FBWA_TDRAG_CHAN parameter	11 years ago
test.pde	Plane: fixed baro test in CLI	10 years ago