You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
46 lines
1.1 KiB
46 lines
1.1 KiB
# hw definition file for processing by chibios_hwdef.py |
|
# for Holybro PH4-mini hardware. |
|
# This is a varient of fmuv5 without the IOMCU |
|
|
|
include ../fmuv5/hwdef.dat |
|
|
|
# we shift the system timer to TIM5 to allow |
|
# us to use TIM2 for extra PWM outputs |
|
STM32_ST_USE_TIMER 5 |
|
|
|
# order of UARTs (and USB). Telem2 is UART4 on the mini, USART3 is not available |
|
UART_ORDER OTG1 USART1 USART2 UART4 USART6 UART7 OTG2 |
|
|
|
# enable TX on USART6 (disabled for fmuv5 with iomcu) |
|
PG14 USART6_TX USART6 NODMA |
|
|
|
# disable the IOMCU UART |
|
undef IOMCU_UART |
|
undef UART8_TX |
|
undef UART8_RX |
|
undef AP_FEATURE_SBUS_OUT |
|
|
|
# allow the first 3 capture ports to be used as PWM outputs or GPIOs |
|
undef PA5 |
|
undef PB3 |
|
undef PB11 |
|
undef FMU_CAP1 |
|
undef FMU_CAP2 |
|
undef FMU_CAP3 |
|
|
|
PA5 TIM2_CH1 TIM2 PWM(9) GPIO(58) |
|
PB3 TIM2_CH2 TIM2 PWM(10) GPIO(59) |
|
PB11 TIM2_CH4 TIM2 PWM(11) GPIO(60) |
|
|
|
# RCInput on the PPM pin, for all protocols |
|
PI5 TIM8_CH1 TIM8 RCININT PULLUP LOW |
|
|
|
# setup for supplied power brick |
|
undef HAL_BATT_VOLT_SCALE |
|
define HAL_BATT_VOLT_SCALE 18.182 |
|
undef HAL_BATT_CURR_SCALE |
|
define HAL_BATT_CURR_SCALE 36.364 |
|
|
|
# setup safety switch |
|
PE12 LED_SAFETY OUTPUT |
|
PE10 SAFETY_IN INPUT PULLDOWN
|
|
|