You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
73 lines
1.8 KiB
73 lines
1.8 KiB
// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*- |
|
|
|
// filter altitude from the barometer with a low pass filter |
|
static LowPassFilterInt32 altitude_filter; |
|
|
|
|
|
static void init_barometer(void) |
|
{ |
|
gcs_send_text_P(SEVERITY_LOW, PSTR("Calibrating barometer")); |
|
barometer.calibrate(); |
|
|
|
// filter at 100ms sampling, with 0.7Hz cutoff frequency |
|
altitude_filter.set_cutoff_frequency(0.1, 0.7); |
|
|
|
gcs_send_text_P(SEVERITY_LOW, PSTR("barometer calibration complete")); |
|
} |
|
|
|
// read the barometer and return the updated altitude in centimeters |
|
// above the calibration altitude |
|
static int32_t read_barometer(void) |
|
{ |
|
barometer.read(); |
|
return altitude_filter.apply(barometer.get_altitude() * 100.0); |
|
} |
|
|
|
/* |
|
ask airspeed sensor for a new value |
|
*/ |
|
static void read_airspeed(void) |
|
{ |
|
if (airspeed.enabled()) { |
|
airspeed.read(); |
|
calc_airspeed_errors(); |
|
} |
|
} |
|
|
|
static void zero_airspeed(void) |
|
{ |
|
airspeed.calibrate(); |
|
gcs_send_text_P(SEVERITY_LOW,PSTR("zero airspeed calibrated")); |
|
} |
|
|
|
// read_battery - reads battery voltage and current and invokes failsafe |
|
// should be called at 10hz |
|
static void read_battery(void) |
|
{ |
|
battery.read(); |
|
|
|
if (!usb_connected && battery.exhausted(g.fs_batt_voltage, g.fs_batt_mah)) { |
|
low_battery_event(); |
|
} |
|
} |
|
|
|
|
|
// read the receiver RSSI as an 8 bit number for MAVLink |
|
// RC_CHANNELS_SCALED message |
|
void read_receiver_rssi(void) |
|
{ |
|
rssi_analog_source->set_pin(g.rssi_pin); |
|
float ret = rssi_analog_source->voltage_average() * 50; |
|
receiver_rssi = constrain_int16(ret, 0, 255); |
|
} |
|
|
|
|
|
/* |
|
return current_loc.alt adjusted for ALT_OFFSET |
|
This is useful during long flights to account for barometer changes |
|
from the GCS, or to adjust the flying height of a long mission |
|
*/ |
|
static int32_t adjusted_altitude_cm(void) |
|
{ |
|
return current_loc.alt - (g.alt_offset*100); |
|
}
|
|
|